Ho configurato il mio cisco 803 per connettermi ad internet con l'opzione teleconomy internet isdn flat e fin qui tutto ok ma quando attivo l'opzione multilink il router non ne vuole + sapere di connettersi.
Posto di seguito la mia configurazione attuale:
Codice: Seleziona tutto
Building configuration...
Current configuration : 1979 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname cisco
!
ip subnet-zero
no ip source-route
!
isdn switch-type basic-net3
!
!
!
interface Ethernet0
ip address 192.168.1.1 255.255.255.0
ip access-grou
no ip proxy-arp
ip nat inside
!
interface BRI0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
isdn voice-priority <nr tel> in conditional
isdn voice-priority <nr tel> out conditional
ppp authentication chap pap callin
!
interface Dialer1
description ISP
ip address negotiated
ip access-group 121 in
no ip proxy-arp
ip nat outside
encapsulation ppp
no ip split-horizon
dialer pool 1
dialer remote-name Cisco1
dialer idle-timeout 300
dialer string 7010187187 class dialclass
dialer hold-queue 10
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname telecom
ppp chap password 7 010703085E080902
ppp pap sent-username telecom password 7 021201570E05002C
!
ip nat inside source list 18 interface Dialer1 overload
ip nat inside source static tcp 192.168.1.10 4662 interface Dialer1 4662
ip nat inside source static udp 192.168.1.10 4672 interface Dialer1 4672
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
!
!
!
map-class dialer DialClass
access-list 18 permit 192
access-list 121 deny udp any eq netbios-dgm any
access-list 121 deny udp any eq netbios-ns any
access-list 121 deny udp any eq netbios-ss any
access-list 121 deny tcp any eq 137 any
access-list 121 deny tcp any eq 138 any
access-list 121 deny tcp any eq 139 any
access-list 121 permit ip any any time-range TIME
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120 0
stopbits 1
line vty 0 4
exec-timeout 0 0
login local
!
no rcapi server
!
!
time-range TIME
periodic daily 0:00 to 23:59
!
end