ho da porvi l'ennesimo quesito ho 2 3750 Catalyst che erano collegati in stack che
voglio riportare alla normalita'.
Ho formattato la flash e aggiornato l'iOS, poi ho cancellato tutti i file di configurazione e fatto il reboot
ma si vede che ho dimenticato ancora qualche cosa perche lo switch va alla ricerca del vecchio iOS e poi non trovandolo carica quello che ho inserito io sulla flash.
ed in piu' continua a partire come switch numero 2.
mi chiarite un po questa cosa ?
questo e' il boot del 3750 : (mi scuso per la lunghezza
, le parti non necessarie sono state eliminate.) Boot Sector Filesystem (bs) installed, fsid: 2
Base ethernet MAC Address: 00:11:93:55:93:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs[0]: 3 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 13010432
flashfs[0]: Bytes available: 2988544
flashfs[0]: flashfs fsck took 9 seconds.
...done Initializing Flash.
done.
Loading "flash:/c3750-ipservicesk9-mz.122-50.SE2/c3750-ipservicesk9-mz.122-50.SE2.bin"...flash:/c3750-ipservicesk9-mz.122-50.SE2/c3750-ipservicesk9-mz.122-50.SE2.bin: no such file or directory
Error loading "flash:/c3750-ipservicesk9-mz.122-50.SE2/c3750-ipservicesk9-mz.122-50.SE2.bin"
Interrupt within 5 seconds to abort boot process.
Loading "flash:/c3750-ipservicesk9-mz.122-55.SE5.bin"...@@@@ .......
File "flash:/c3750-ipservicesk9-mz.122-55.SE5.bin" uncompressed and installed, entry point: 0x1000000
executing...
.
.
.
.
Cisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 09-Feb-12 18:59 by prod_rel_team
Image text-base: 0x01000000, data-base: 0x02F00000
Initializing flashfs...
flashfs[1]: 3 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 13010432
flashfs[1]: Bytes available: 2988544
flashfs[1]: flashfs fsck took 1 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
Checking for Bootloader upgrade.. not needed
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
Waiting for Stack Master Election...
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: No Cable found on stack port 1
POST: No Cable found on stack port 2
POST: PortASIC Stack Port Loopback Tests : Begin
POST: PortASIC Stack Port Loopback Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
Election Complete
Switch 2 booting as Master
Waiting for Port download...Complete
.
.
.
cisco WS-C3750G-24TS (PowerPC405) processor (revision F0) with 131072K bytes of memory.
Processor board ID CAT0829X02Y
Last reset from power-on
1 Virtual Ethernet interface
28 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:11:93:55:93:80
Motherboard assembly number : 73-7058-10
Power supply part number : 341-0045-01
Motherboard serial number : CAT082814EH
Power supply serial number : PHI0816010X
Model revision number : F0
Motherboard revision number : A0
Model number : WS-C3750G-24TS-S
System serial number : CAT0829X02Y
Hardware Board Revision Number : 0x09
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 2 28 WS-C3750G-24TS 12.2(55)SE5 C3750-IPSERVICESK9-M
Press RETURN to get started!
IPV6 CAM MASK WRITE maskIndex 6
IPV6 CAM MASK WRITE maskIndex 5
IPV6 CAM MASK WRITE maskIndex 4
IPV6 CAM MASK WRITE maskIndex 6
IPV6 CAM MASK WRITE maskIndex 5
IPV6 CAM MASK WRITE maskIndex 4
IPV6 CAM MASK WRITE maskIndex 6
IPV6 CAM MASK WRITE maskIndex 5
IPV6 CAM MASK WRITE maskIndex 4
IPV6 CAM MASK WRITE maskIndex 6
IPV6 CAM MASK WRITE maskIndex 5
IPV6 CAM MASK WRITE maskIndex 4
IPV6 CAM MASK WRITE maskIndex 6
IPV6 CAM MASK WRITE maskIndex 5
IPV6 CAM MASK WRITE maskIndex 4
IPV6 CAM MASK WRITE maskIndex 6
IPV6 CAM MASK WRITE maskIndex 5
IPV6 CAM MASK WRITE maskIndex 4
IPV6 CAM MASK WRITE maskIndex 6
IPV6 CAM MASK WRITE maskIndex 5
IPV6 CAM MASK WRITE maskIndex 4
*Mar 1 00:01:44.354: %STACKMGR-4-SWITCH_ADDED: Switch 2 has been ADDED to the stack
*Mar 1 00:01:45.990: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Mar 1 00:01:47.323: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Mar 1 00:02:08.379: %STACKMGR-5-SWITCH_READY: Switch 2 is READY
*Mar 1 00:02:08.379: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 2 has changed to state DOWN
*Mar 1 00:02:08.379: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 2 has changed to state DOWN
*Mar 1 00:02:08.815: %STACKMGR-5-MASTER_READY: Master Switch 2 is READY
*Mar 1 00:02:08.974: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 09-Feb-12 18:59 by prod_rel_team
*Mar 1 00:02:16.952: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/24, changed state to up
*Mar 1 00:02:17.959: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/24, changed state to up
*Mar 1 00:02:44.978: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
--- System Configuration Dialog ---
Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enable secret
If you choose not to enter the intial configuration dialog, or if you exit setup without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0 <cleartext password>
----------------------------------
Would you like to enter the initial configuration dialog? [yes/no]: n
Switch>
Switch>
Switch>
Switch>
Switch>
*Mar 1 00:03:09.389: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively down
*Mar 1 00:03:09.397: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Switch>
