Codice: Seleziona tutto
R2>en
R2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#ipv6 ?
access-list Configure access lists
cef Cisco Express Forwarding for IPv6
hop-limit Configure hop count limit
host Configure static hostnames
icmp Configure ICMP parameters
local Specify local options
neighbor Neighbor
prefix-list Build a prefix list
route Configure static routes
router Enable an IPV6 routing process
source-route Process packets with source routing header options
unicast-routing Enable unicast routing
R2(config)#ipv6 router ?
ospf Open Shortest Path First (OSPF)
rip IPv6 Routing Information Protocol (RIPv6)
R2(config)#ipv6 router ospf ?
<1-65535> Process ID
R2(config)#ipv6 router ospf 6
R2(config)#
che ios con supporto a ospf v3 suggerite che possa girare su questa macchina? grazie
Codice: Seleziona tutto
R2#sh version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(3a), RELEASE SOFTWARE ()
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Wed 15-Oct-03 06:38 by dchih
Image text-base: 0x80008098, data-base: 0x819AFDB8
ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
R2 uptime is 4 minutes
System returned to ROM by reload
System image file is "flash:C2600-Ik9o3s3-Mz.123-3a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco 2651XM (MPC860P) processor (revision 0x100) with 60416K/5120K bytes of me.
Processor board ID JAD0626016Z (1116819523)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
. Però è brutto che se non gestiscono una funzione prendano i comandi.
