topologie e configurazione frame-relay (cloud) per studenti

[anubisg1]

Bhe, sperando che questo thread possa essere utile, voglio proporvi, delle topologie che includono un cloud frame relay.

in molti esercizi infatti, si ha bisogno di creare un cloud, ma forse i nuovi studenti non sanno che è sufficiente un router per fare da switch frame-relay e permettervi di effettuare i laboratori con molta facilità..

iniziamo con la prima e più classica topologia...

qui ho usato un cisco 2610 con 2 WIC 2-T (quindi 4 smart serial in totale) come switch frame-relay.

la topologia consite in un router che è l'hub, ovvero quello della sede principale, che si connette a 3 router diversi ognuno con un proprio PVC, in quelle che possiamo immaginare essere sedi remote (i branch routers)

ecco un immagine della topologia, poi la configurazione del router all'interno del cloud.



Uploaded with ImageShack.us

Codice: Seleziona tutto

! 
version 12.1 
no service single-slot-reload-enable 
service timestamps debug uptime 
service timestamps log uptime 
service password-encryption 
! 
hostname FRAME_RELAY_SWITCH 
! 
! 
username USERNAME privilege 15 password 7 047702081A39795D0C0B5D40 
! 
! 
! 
! 
ip subnet-zero 
ip domain-name test.lab 
! 
frame-relay switching 
! 
! 
! 
! 
! 
! 
! 
interface Ethernet0/0 
 no ip address 
 shutdown 
! 
interface Serial0/0 
 no ip address 
 encapsulation frame-relay 
 logging event subif-link-status 
 logging event dlci-status-change 
 no fair-queue 
 clockrate 56000 
 no frame-relay inverse-arp 
 frame-relay intf-type dce 
 frame-relay route 122 interface Serial0/1 221 
 frame-relay route 123 interface Serial0/2 321 
 frame-relay route 124 interface Serial0/3 421 
! 
interface Serial0/1 
 no ip address 
 encapsulation frame-relay 
 logging event subif-link-status 
 logging event dlci-status-change 
 clockrate 56000 
 no frame-relay inverse-arp 
 frame-relay intf-type dce 
 frame-relay route 221 interface Serial0/0 122 
! 
interface Serial0/2 
 no ip address 
 encapsulation frame-relay 
 logging event subif-link-status 
 logging event dlci-status-change 
 clockrate 56000 
 no frame-relay inverse-arp 
 frame-relay intf-type dce 
 frame-relay route 321 interface Serial0/0 123 
! 
interface Serial0/3 
 no ip address 
 encapsulation frame-relay 
 logging event subif-link-status 
 logging event dlci-status-change 
 clockrate 56000 
 no frame-relay inverse-arp 
 frame-relay intf-type dce 
 frame-relay route 421 interface Serial0/0 124 
! 
ip classless 
ip http server 
! 
! 
! 
line con 0 
 logging synchronous 
 login local 
line aux 0 
line vty 0 4 
 login local 
! 
end 

spero che la prima topologia possa essere utile

[anubisg1]

quest'altra topologia invece, si presenta in maniera diversa...

abbiamo due routers, WAN1 e WAN2 che dovrebbero appartenere alla sede principale, principalmente uno dovrebbe essere il back up dell'altro. Questa topologia è quella che ho incontrato studiando il terzo capitolo (su EIGRP) dell'esame ROUTE per la CCNP (642-902)

ecco la topologia, e poi la configurazione del router nel cloud. come prima un 2600 con 4 seriali

Codice: Seleziona tutto

! 
version 12.1 
no service single-slot-reload-enable 
service timestamps debug uptime 
service timestamps log uptime 
service password-encryption 
! 
hostname FRAME_RELAY_SWITCH 
! 
! 
username USERNAME privilege 15 password 7 047702081A39795D0C0B5D40 
! 
! 
! 
! 
ip subnet-zero 
ip domain-name test.lab 
! 
frame-relay switching 
! 
! 
! 
! 
! 
! 
! 
interface Ethernet0/0 
 no ip address 
 shutdown 
! 
interface Serial0/0 
 no ip address 
 encapsulation frame-relay 
 logging event subif-link-status 
 logging event dlci-status-change 
 no fair-queue 
 clockrate 56000 
 no frame-relay inverse-arp 
 frame-relay intf-type dce 
 frame-relay route 122 interface Serial0/3 221 
 frame-relay route 123 interface Serial0/2 321 
! 
interface Serial0/1 
 no ip address 
 encapsulation frame-relay 
 logging event subif-link-status 
 logging event dlci-status-change 
 clockrate 56000 
 no frame-relay inverse-arp 
 frame-relay intf-type dce 
 frame-relay route 124 interface Serial0/3 421 
 frame-relay route 125 interface Serial0/2 521 
! 
interface Serial0/2 
 no ip address 
 encapsulation frame-relay 
 logging event subif-link-status 
 logging event dlci-status-change 
 clockrate 56000 
 no frame-relay inverse-arp 
 frame-relay intf-type dce 
 frame-relay route 321 interface Serial0/0 123 
 frame-relay route 521 interface Serial0/1 125 
! 
interface Serial0/3 
 no ip address 
 encapsulation frame-relay 
 logging event subif-link-status 
 logging event dlci-status-change 
 clockrate 56000 
 no frame-relay inverse-arp 
 frame-relay intf-type dce 
 frame-relay route 221 interface Serial0/0 122 
 frame-relay route 421 interface Serial0/1 124 
! 
ip classless 
ip http server 
! 
! 
! 
line con 0 
 logging synchronous 
 login local 
line aux 0 
line vty 0 4 
 login local 
! 
end

spero che sia una cosa gradita...