Ho un problema con l'invio, attraverso Outlook, dei messaggi di posta.
La ricezione avviene correttamente mentre l'invio dei messaggi di posta risulta impossibile.
Leggendo qua e la tra forum e tutorial, ho provato svariate variabili (ip inspect name myfw smtp timeout 3600 e no) ma senza nessun risultato
Premettendo di essere un neofita/autodidatta del ios,
Vado a postarvi la configurazione, attuale, del mio apparato 837.
Codice: Seleziona tutto
version 12.3
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname C3-P0
!
memory-size iomem 5
enable secret 5 blablablabla
!
username blablablabla password 7 blablablabla
no aaa new-model
ip subnet-zero
no ip source-route
!
ip dhcp excluded-address 10.160.30.1 10.160.30.5
!
ip dhcp pool DHCP-LAN
network 10.160.30.0 255.255.255.0
default-router 10.160.30.1
domain-name magnoni.local
dns-server 85.38.28.68 85.37.17.16 85.37.17.52 85.37.17.58 8.8.4.4 8.8.8.8 4.2.2.3 4.2.2.4
lease 0 12
!
no ip bootp server
ip ids po max-events 100
no ftp-server write-enable
!
interface Ethernet0
description Interfaccia Ethernet0/0 - Lan interna
ip address 10.160.30.1 255.255.255.0
ip nat inside
ip virtual-reassembly
no cdp enable
hold-queue 100 out
!
interface Ethernet2
no ip address
shutdown
no cdp enable
hold-queue 100 out
!
interface ATM0
description Interfaccia ATM0/0 - Connessione ADSL
no ip address
no atm ilmi-keepalive
dsl operating-mode ansi-dmt
hold-queue 224 in
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface FastEthernet1
no ip address
duplex auto
speed auto
!
interface FastEthernet2
no ip address
duplex auto
speed auto
!
interface FastEthernet3
no ip address
duplex auto
speed auto
!
interface FastEthernet4
no ip address
duplex auto
speed auto
!
interface Dialer0
description Interfaccia Dialer0/0 - Alice ADSL Flat 7MBIT
bandwidth 7168
ip address negotiated
ip mtu 1492
ip nbar protocol-discovery
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp header-compression
dialer pool 1
dialer-group 1
no cdp enable
ppp chap hostname blablablabla
ppp chap password 7 blablablabla
ppp pap sent-username blablablabla password 7 blablablabla
ppp ipcp dns request
ppp ipcp wins request
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
!
ip http server
ip http secure-server
ip nat translation timeout 420
ip nat translation tcp-timeout 120
ip nat translation pptp-timeout 420
ip nat translation icmp-timeout 1
ip nat translation max-entries 1000
ip nat inside source list 1 interface Dialer0 overload
!
access-list 1 permit 10.160.30.0 0.0.0.255 log
no cdp run
!
line con 0
logging synchronous
no modem enable
transport preferred all
transport output all
stopbits 1
line aux 0
transport preferred all
transport output all
line vty 0 4
access-class 1 in
exec-timeout 120 0
password 7 blablablabla
logging synchronous
login
length 0
transport preferred all
transport input all
transport output all
!
scheduler max-task-time 5000
Qualche anima pia potrebbe indicarmi dove vado a sbagliare e quale/i modifiche dovrei pportare alla suddetta configurazione per poter tornare a inviare regolarmente le email dal programma?!
Ringraziandovi per il fantastico lavoro che operate quasi quotidianamente vi saluto.
