Buongiorno a tutti, avrei necessità di configurare un access point aironet 1242, vi spiego a che punto sono.
Ho collegato il 1242 con il cavo blu sono entrato nell'ap con hyperterminal, sono riuscito ad assegnare un ip con il server dhcp che in auto si è assegnato l'indirizzo 192.168.3.11, ho provato ad accedere all'indirizzo con explorer ma non è abilitata l'interfaccia gui. Scusate ma sono inesperto con cisco potreste darmi una mano per abilitare l'interfaccia gui ?
Grazie da subito .
Aiuto per configurazione Access point 1242ag
Moderatore: Federico.Lagni
-
Wizard
- Intergalactic subspace network admin
- Messaggi: 3441
- Iscritto il: ven 03 feb , 2006 10:04 am
- Località: Emilia Romagna
- Contatta:
Intanto l ip dallo statico senò domani ti cambia l ip del ap e come fai a raggiungerlo?sono riuscito ad assegnare un ip con il server dhcp che in auto si è assegnato l'indirizzo 192.168.3.11
Per l accesso da web cmq dovresti configurare così:
ip http server
ip http secure-server
...
Il futuro è fatto di persone che hanno delle intuizioni e visioni .....sono quelle persone che fanno la differenza...... quelle dotate di un TERZO OCCHIO....
-
momodj20
- n00b
- Messaggi: 6
- Iscritto il: mar 26 mag , 2009 8:26 am
Il mio access point ha la versione firmware 12.3(11) jx1 .
di seguito sono riportati i comandi che si possono eseguire.
Mi hanno detto che ogni modello e firmware ha una sua configurazione.
Aiutoooooo
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
lwapp lwapp exec commands
mkdir Create new directory
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
ping Send echo messages
pwd Display current working directory
release Release a resource
reload Halt and perform a cold restart
rename Rename a file
renew Renew a resource
rmdir Remove existing directory
save Start to save raise_interrupt_level stack
send Send a message to other tty lines
set Set system parameter (not config)
AP0021.a0d2.674c#release
% Incomplete command.
AP0021.a0d2.674c#?
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
lwapp lwapp exec commands
mkdir Create new directory
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
ping Send echo messages
pwd Display current working directory
release Release a resource
reload Halt and perform a cold restart
rename Rename a file
renew Renew a resource
rmdir Remove existing directory
save Start to save raise_interrupt_level stack
send Send a message to other tty lines
set Set system parameter (not config)
show Show running system information
systat Display information about terminal lines
terminal Set terminal line parameters
test Test subsystems, memory, and interfaces
traceroute Trace route to destination
undebug Disable debugging functions (see also 'debug')
upgrade Upgrade software
verify Verify a file
where List active connections
AP0021.a0d2.674c#
AP0021.a0d2.674c#
AP0021.a0d2.674c#
AP0021.a0d2.674c#terminal ?
data-character-bits Size of characters being handled
databits Set number of data bits per character
default Set a command to its defaults
domain-lookup Enable domain lookups in show commands
download Put line into 'download' mode
editing Enable command line editing
escape-character Change the current line's escape character
exec Configure EXEC
exec-character-bits Size of characters to the command exec
flowcontrol Set the flow control
full-help Provide help to unprivileged user
help Description of the interactive help system
history Enable and control the command history function
international Enable international 8-bit character support
ip IP options
length Set number of lines on a screen
modem Configure the Modem Control Lines
monitor Copy debug output to the current terminal line
no Negate a command or set its defaults
notify Inform users of output from concurrent sessions
padding Set padding for a specified output character
parity Set terminal parity
rxspeed Set the receive speed
special-character-bits Size of the escape (and other special) characters
speed Set the transmit and receive speeds
start-character Define the start character
stop-character Define the stop character
stopbits Set async line stop bits
terminal-type Set the terminal type
transport Define transport protocols for line
txspeed Set the transmit speeds
width Set width of the display terminal
AP0021.a0d2.674c#terminal
% Incomplete command.
AP0021.a0d2.674c#
AP0021.a0d2.674c#terminal ?
data-character-bits Size of characters being handled
databits Set number of data bits per character
default Set a command to its defaults
domain-lookup Enable domain lookups in show commands
download Put line into 'download' mode
editing Enable command line editing
escape-character Change the current line's escape character
exec Configure EXEC
exec-character-bits Size of characters to the command exec
flowcontrol Set the flow control
full-help Provide help to unprivileged user
help Description of the interactive help system
history Enable and control the command history function
international Enable international 8-bit character support
ip IP options
length Set number of lines on a screen
modem Configure the Modem Control Lines
monitor Copy debug output to the current terminal line
no Negate a command or set its defaults
notify Inform users of output from concurrent sessions
padding Set padding for a specified output character
parity Set terminal parity
rxspeed Set the receive speed
special-character-bits Size of the escape (and other special) characters
speed Set the transmit and receive speeds
start-character Define the start character
stop-character Define the stop character
stopbits Set async line stop bits
terminal-type Set the terminal type
transport Define transport protocols for line
txspeed Set the transmit speeds
width Set width of the display terminal
AP0021.a0d2.674c#terminal
% Incomplete command.
AP0021.a0d2.674c#
AP0021.a0d2.674c#
AP0021.a0d2.674c#?
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
lwapp lwapp exec commands
mkdir Create new directory
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
AP0021.a0d2.674c#name-connection
Connection number: 1
% 1 is not an open connection
AP0021.a0d2.674c#lwaap
^
% Invalid input detected at '^' marker.
AP0021.a0d2.674c#lwapp
% Incomplete command.
AP0021.a0d2.674c#name-connection
Connection number: 1
% 1 is not an open connection
AP0021.a0d2.674c#led
% Incomplete command.
AP0021.a0d2.674c#?
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
lwapp lwapp exec commands
mkdir Create new directory
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
AP0021.a0d2.674c#?
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
lwapp lwapp exec commands
mkdir Create new directory
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
ping Send echo messages
pwd Display current working directory
release Release a resource
reload Halt and perform a cold restart
rename Rename a file
renew Renew a resource
rmdir Remove existing directory
save Start to save raise_interrupt_level stack
send Send a message to other tty lines
set Set system parameter (not config)
show Show running system information
systat Display information about terminal lines
terminal Set terminal line parameters
test Test subsystems, memory, and interfaces
traceroute Trace route to destination
undebug Disable debugging functions (see also 'debug')
upgrade Upgrade software
verify Verify a file
where List active connections
AP0021.a0d2.674c#
di seguito sono riportati i comandi che si possono eseguire.
Mi hanno detto che ogni modello e firmware ha una sua configurazione.
Aiutoooooo
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
lwapp lwapp exec commands
mkdir Create new directory
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
ping Send echo messages
pwd Display current working directory
release Release a resource
reload Halt and perform a cold restart
rename Rename a file
renew Renew a resource
rmdir Remove existing directory
save Start to save raise_interrupt_level stack
send Send a message to other tty lines
set Set system parameter (not config)
AP0021.a0d2.674c#release
% Incomplete command.
AP0021.a0d2.674c#?
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
lwapp lwapp exec commands
mkdir Create new directory
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
ping Send echo messages
pwd Display current working directory
release Release a resource
reload Halt and perform a cold restart
rename Rename a file
renew Renew a resource
rmdir Remove existing directory
save Start to save raise_interrupt_level stack
send Send a message to other tty lines
set Set system parameter (not config)
show Show running system information
systat Display information about terminal lines
terminal Set terminal line parameters
test Test subsystems, memory, and interfaces
traceroute Trace route to destination
undebug Disable debugging functions (see also 'debug')
upgrade Upgrade software
verify Verify a file
where List active connections
AP0021.a0d2.674c#
AP0021.a0d2.674c#
AP0021.a0d2.674c#
AP0021.a0d2.674c#terminal ?
data-character-bits Size of characters being handled
databits Set number of data bits per character
default Set a command to its defaults
domain-lookup Enable domain lookups in show commands
download Put line into 'download' mode
editing Enable command line editing
escape-character Change the current line's escape character
exec Configure EXEC
exec-character-bits Size of characters to the command exec
flowcontrol Set the flow control
full-help Provide help to unprivileged user
help Description of the interactive help system
history Enable and control the command history function
international Enable international 8-bit character support
ip IP options
length Set number of lines on a screen
modem Configure the Modem Control Lines
monitor Copy debug output to the current terminal line
no Negate a command or set its defaults
notify Inform users of output from concurrent sessions
padding Set padding for a specified output character
parity Set terminal parity
rxspeed Set the receive speed
special-character-bits Size of the escape (and other special) characters
speed Set the transmit and receive speeds
start-character Define the start character
stop-character Define the stop character
stopbits Set async line stop bits
terminal-type Set the terminal type
transport Define transport protocols for line
txspeed Set the transmit speeds
width Set width of the display terminal
AP0021.a0d2.674c#terminal
% Incomplete command.
AP0021.a0d2.674c#
AP0021.a0d2.674c#terminal ?
data-character-bits Size of characters being handled
databits Set number of data bits per character
default Set a command to its defaults
domain-lookup Enable domain lookups in show commands
download Put line into 'download' mode
editing Enable command line editing
escape-character Change the current line's escape character
exec Configure EXEC
exec-character-bits Size of characters to the command exec
flowcontrol Set the flow control
full-help Provide help to unprivileged user
help Description of the interactive help system
history Enable and control the command history function
international Enable international 8-bit character support
ip IP options
length Set number of lines on a screen
modem Configure the Modem Control Lines
monitor Copy debug output to the current terminal line
no Negate a command or set its defaults
notify Inform users of output from concurrent sessions
padding Set padding for a specified output character
parity Set terminal parity
rxspeed Set the receive speed
special-character-bits Size of the escape (and other special) characters
speed Set the transmit and receive speeds
start-character Define the start character
stop-character Define the stop character
stopbits Set async line stop bits
terminal-type Set the terminal type
transport Define transport protocols for line
txspeed Set the transmit speeds
width Set width of the display terminal
AP0021.a0d2.674c#terminal
% Incomplete command.
AP0021.a0d2.674c#
AP0021.a0d2.674c#
AP0021.a0d2.674c#?
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
lwapp lwapp exec commands
mkdir Create new directory
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
AP0021.a0d2.674c#name-connection
Connection number: 1
% 1 is not an open connection
AP0021.a0d2.674c#lwaap
^
% Invalid input detected at '^' marker.
AP0021.a0d2.674c#lwapp
% Incomplete command.
AP0021.a0d2.674c#name-connection
Connection number: 1
% 1 is not an open connection
AP0021.a0d2.674c#led
% Incomplete command.
AP0021.a0d2.674c#?
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
lwapp lwapp exec commands
mkdir Create new directory
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
AP0021.a0d2.674c#?
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
lwapp lwapp exec commands
mkdir Create new directory
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
ping Send echo messages
pwd Display current working directory
release Release a resource
reload Halt and perform a cold restart
rename Rename a file
renew Renew a resource
rmdir Remove existing directory
save Start to save raise_interrupt_level stack
send Send a message to other tty lines
set Set system parameter (not config)
show Show running system information
systat Display information about terminal lines
terminal Set terminal line parameters
test Test subsystems, memory, and interfaces
traceroute Trace route to destination
undebug Disable debugging functions (see also 'debug')
upgrade Upgrade software
verify Verify a file
where List active connections
AP0021.a0d2.674c#
-
luca.prina
- Cisco enlightened user
- Messaggi: 125
- Iscritto il: dom 09 set , 2007 8:30 pm
Ciao,
ti suggerirei, almeno per i primi tempi, di utilizzare la configurazione da web, è piuttosto semplice creare una config. base funzionante.
Ti conviene quindi verificare che il server http sia attivo (tramite i comandi che ti ha suggerito Wizard) dopodichè connetterti tramite browser e fare da li la prima config.
Pian piano potrai passare alla CLI ...
Ultima cosa.. sul cd allegato all' AP c'è un documento cisco (lo so perchè l'ho appena utilizzato
) che spiega i passi iniziali per arrivare ad una minima config funzionate.
Spero ti possa essere d'aiuto...
saluti a tutti
Luca P
ti suggerirei, almeno per i primi tempi, di utilizzare la configurazione da web, è piuttosto semplice creare una config. base funzionante.
Ti conviene quindi verificare che il server http sia attivo (tramite i comandi che ti ha suggerito Wizard) dopodichè connetterti tramite browser e fare da li la prima config.
Pian piano potrai passare alla CLI ...
Ultima cosa.. sul cd allegato all' AP c'è un documento cisco (lo so perchè l'ho appena utilizzato
) che spiega i passi iniziali per arrivare ad una minima config funzionate.Spero ti possa essere d'aiuto...
saluti a tutti
Luca P
-
luca.prina
- Cisco enlightened user
- Messaggi: 125
- Iscritto il: dom 09 set , 2007 8:30 pm
Ciao,
i comandi che ti ha dato Wizard servono per abilitare (da CLI) proprio l' accesso via Web
è chiaro che devi avere un ip statico sull' interfaccia BV1
es:
Ti consiglio di collegarti in console e di dare i comandi per settare l'ip statico e quelli di Wizard chiaramente in modalita configurazione
Facci sapere...
ciao ciao
Luca
i comandi che ti ha dato Wizard servono per abilitare (da CLI) proprio l' accesso via Web
è chiaro che devi avere un ip statico sull' interfaccia BV1
es:
Codice: Seleziona tutto
!
interface BVI1
ip address 10.10.4.100 255.255.255.0
Facci sapere...
ciao ciao
Luca
-
momodj20
- n00b
- Messaggi: 6
- Iscritto il: mar 26 mag , 2009 8:26 am
Scusa la mia ignoranza ma la modalità comando si abilita scrivendo enable inserisco la password Cisco ed entra in exec mode
l'unica cosa che non capisco questi codici che scrivi vanno inseriti uno ad uno tipo
! clicco invio
ecc.
cmq ho provato a scrivere
interface BVI1
ma il comando non viene riconosciuto..
Potresti spiegarmi passo passo
scusa ma è moltoooo difficile , non è così semplice anche perchè è come se i comandi non fossero quelli che tu mi scivi.
hai un utente skype?
il mio contatto è maurizioraf.
Per favore aiutatemi ve ne sarei grato per sempre.
l'unica cosa che non capisco questi codici che scrivi vanno inseriti uno ad uno tipo
! clicco invio
ecc.
cmq ho provato a scrivere
interface BVI1
ma il comando non viene riconosciuto..
Potresti spiegarmi passo passo
scusa ma è moltoooo difficile , non è così semplice anche perchè è come se i comandi non fossero quelli che tu mi scivi.
hai un utente skype?
il mio contatto è maurizioraf.
Per favore aiutatemi ve ne sarei grato per sempre.
-
luca.prina
- Cisco enlightened user
- Messaggi: 125
- Iscritto il: dom 09 set , 2007 8:30 pm
Ciao,
provo a darti l'elenco completo dei comandi da dare in console:
a questo punto dovresti riuscire a collegarti con il browser sull' indirizzo ip che hai assegnato (fai prima un ping di controllo)
ciao ciao
Luca
provo a darti l'elenco completo dei comandi da dare in console:
Codice: Seleziona tutto
en (invio)
[PASSWORD DI ENABLE] (invio)
#conf t (invio)
#(config) interface BVI1 (invio)
#(config-if) ip address 10.10.4.100 255.255.255.0 (metti ovviam un ip della tua rete) (invio)
#(config-if) exit (invio)
#(config) ip http server (invio)
ip http secure-server (invio)
#(config) end (invio)
ciao ciao
Luca
-
momodj20
- n00b
- Messaggi: 6
- Iscritto il: mar 26 mag , 2009 8:26 am
il comando conf non funziona , abbiamo parlato con un tecnico cisco, dobbiamo cambiare firmware in autonomous per poter utilizzare i comandi config.
Spero sia questo .
Anche il tecnico cisco sta avendo difficoltà nella configurazione.
PS: ho letto tutti i manuali e non c'è scritto niente del genere.
Cisco = tassa
Spero sia questo .
Anche il tecnico cisco sta avendo difficoltà nella configurazione.
PS: ho letto tutti i manuali e non c'è scritto niente del genere.
Cisco = tassa
