call-forwanding

[mssdnl]

Scusatemi non capisco come mai il call-forwarding funziona sui numeri urbani e interurbani e NON funziona sui cellulari.
Qualcuno sa dirmi come mai?

[mgentili]

scusa la domanda, ma su quale sistema ?
Se hai un call manager hai provato a controllare le css ?

[ketVet]

Hai un CUCM oppure un CUCME? Nel secondo caso, posti la configurazione?

[mssdnl]

UC520 con CME 4.2(0)


stcapp ccm-group 1
stcapp
!
stcapp feature access-code
!
-
isdn switch-type basic-net3
!
!
voice call send-alert
voice rtp send-recv
!
voice service voip
allow-connections h323 to h323
supplementary-service h450.12
sip
no update-callerid
!
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
!

!
voice translation-rule 1010
rule 2 /^1isdntelecom/ /700/
!
voice translation-rule 1011
rule 1 /^2isdnTelecom/ /700/
rule 2 /^3Telecom/ /621/
!
voice translation-rule 2003
rule 1 /^4isdnTelecom/ /331/
!
!
voice translation-profile Fax_Profile
translate called 2003
!
voice translation-profile linea-101
translate calling 100
translate called 1010
!
voice translation-profile linea-202
translate calling 100
translate called 1011
!
!
voice-card 0
no dspfarm
!
archive
log config
logging enable
logging size 600
hidekeys
!
!
ip tftp source-interface Vlan1
!
!
!
interface Loopback0
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly
!
interface FastEthernet0/0
description $FW_OUTSIDE$
ip address dhcp
ip access-group 104 in
ip nat outside
ip inspect SDM_LOW out
ip virtual-reassembly
duplex auto
speed auto
!
interface Integrated-Service-Engine0/0
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
!

!
interface BRI0/1/0
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
!
interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
!
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
!
interface BRI0/3/1
no ip address
shutdown
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
!
interface Vlan1
description $FW_INSIDE$
ip address 192.168.1.201 255.255.255.0
ip access-group 102 in
ip nat inside
ip virtual-reassembly
!
interface Vlan100
description $FW_INSIDE$
ip address 10.1.1.1 255.255.255.0
ip access-group 103 in
ip nat inside
ip virtual-reassembly
!
ip route 0.0.0.0 0.0.0.0 192.168.1.1
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
!
ip http server
ip http authentication local
ip http secure-server
ip http path flash:
ip nat inside source list 1 interface FastEthernet0/0 overload
!

!
control-plane
!
!
!
voice-port 0/0/0
no vad
no comfort-noise
cptone IT
timeouts ringing infinity
!
voice-port 0/0/1
timeouts ringing infinity
!
voice-port 0/0/2
timeouts ringing infinity
!
voice-port 0/0/3
timeouts ringing infinity
!
voice-port 0/1/0
compand-type a-law
connection plar 700
bearer-cap Speech
!
voice-port 0/1/1
compand-type a-law
bearer-cap Speech
!
voice-port 0/2/0
!
voice-port 0/2/1
!
voice-port 0/2/2
voice-port 0/2/3
!
voice-port 0/3/0
compand-type a-law
bearer-cap Speech
!
voice-port 0/3/1
compand-type a-law
bearer-cap Speech
!
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
!
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
!

dial-peer voice 2 pots
service stcapp
port 0/0/1
!
dial-peer voice 3 pots
service stcapp
port 0/0/2
!
dial-peer voice 4 pots
service stcapp
port 0/0/3
!
dial-peer voice 5 pots
description ** MOH Port **
destination-pattern ABC
port 0/4/0
no sip-register
!
dial-peer voice 52 pots
destination-pattern 0T
direct-inward-dial
no sip-register

dial-peer voice 53 pots
destination-pattern 0T
direct-inward-dial
no sip-register
!
dial-peer voice 51 pots
destination-pattern 0.T
!
dial-peer voice 54 pots
destination-pattern 0T
no digit-strip
direct-inward-dial
forward-digits all
!
dial-peer voice 500 pots
preference 1
destination-pattern 0T
port 0/1/0
!
dial-peer voice 501 pots
preference 2
destination-pattern 0T
port 0/1/1
!
dial-peer voice 502 pots
preference 3
destination-pattern 0T
port 0/3/0
!
dial-peer voice 503 pots
destination-pattern 0T
port 0/3/1
!
dial-peer voice 1011 pots
translation-profile incoming linea-101
incoming called-number 644704294
direct-inward-dial
!
dial-peer voice 2020 pots
translation-profile incoming linea-202
incoming called-number 644704966
direct-inward-dial
!
dial-peer voice 2022 pots
translation-profile incoming linea-202
incoming called-number 649380485
direct-inward-dial
!
dial-peer voice 2006 pots
translation-profile incoming Fax_Profile
incoming called-number 649380149
direct-inward-dial
!
dial-peer voice 1 pots
preference 7
service stcapp
port 0/0/0
!
dial-peer voice 331 pots
destination-pattern 331
port 0/0/0
forward-digits all
!
!
!
!
telephony-service
video
load 7960-7940 P00308000500
load 7914 S00105000200
load 7902 CP7902080002SCCP060817A
load 7921 CP7921G-1.0.4
load 7931 SCCP31.8-2-2SR2S
load 7941GE SCCP41.8-2-2SR2S
load 7941 SCCP41.8-2-2SR2S
load 7961GE SCCP41.8-2-2SR2S
load 7961 SCCP41.8-2-2SR2S
load 7975 SCCP75.8-3-2S
load 7965 SCCP45.8-3-2S
load 7945 SCCP45.8-3-2S
load 7942 SCCP42.8-3-2S
load 7962 SCCP42.8-3-2S
load 7971 SCCP70.8-2-2SR2S
load 7970 SCCP70.8-2-2SR2S
load 7936 cmterm_7936.3-3-13-0
load 7906 SCCP11.8-2-2SR2S
load 7911 SCCP11.8-2-2SR2S
load 521G-524G cp524g-08-01-07
max-ephones 40
max-dn 160
ip source-address 10.1.1.1 port 2000
auto assign 10 to 43
auto assign 5 to 8 type anl
calling-number initiator
service phone videoCapability 1
service dnis overlay
service dnis dir-lookup
timeouts interdigit 5
system message UC520
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authenticati ... nticate.do
user-locale IT
network-locale IT
time-zone 5
time-format 24
date-format dd-mm-yy
voicemail 999
max-conferences 5 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$gzSo$I/4cOCdVcTJixwTwiQX0I/
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern 0T
secondary-dialtone 0
night-service code *1234
night-service everyday 00:00 23:59
create cnf-files version-stamp 7960 Mar 19 2009 03:57:05
!
!
ephone-template 15
button-layout 7931 2
!
!

!
ephone-dn 100 dual-line
number 700
pickup-group 10
label Segreteria
description Segreteria
name Segreteria
call-forward night-service 330
huntstop channel
night-service bell
!
!
ephone-dn 101 dual-line
number 700
pickup-group 10
label Segreteria
description Segreteria
name Segreteria
call-forward night-service 330
huntstop channel

!
ephone-dn 102 dual-line
number 700
pickup-group 10
label Segreteria
description Segreteria
name Segreteria
call-forward night-service 330
huntstop channel
night-service bell
!
!
ephone-dn 103 dual-line
number 700
pickup-group 10
label Segreteria
description Segreteria
name Segreteria
call-forward night-service 330
huntstop channel
night-service bell

!
ephone-dn 150
number 150
name isdn

[lorbellu]

Ciao,

Prova ad eseguire un debug isdn q931 ed un debug voip dialpeer per verificare che la segnalazione del tipo di chiamata sia unknown e che venga selezionata correttamente una dial-peer verso l'esterno.

Lorbellu

[mssdnl]

questo è il debug isdn q931


pr 30 23:17:37.921: %LINK-3-UPDOWN: Interface BRI0/3/0, changed state to up
Apr 30 23:17:37.997: ISDN BR0/3/0 Q931: RX <- SETUP pd = 8 callref = 0x6F
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Exclusive, B1
Calling Party Number i = 0x0183, '335xxxxxxx'
Plan:ISDN, Type:Unknown
Called Party Number i = 0xA1, '644xxxxxx'
Plan:ISDN, Type:National
Sending Complete
Apr 30 23:17:38.013: ISDN BR0/1/0 Q931: Applying typeplan for sw-type 0x1 is 0x0 0x1, Calling num 3357660463
Apr 30 23:17:38.065: %LINK-3-UPDOWN: Interface BRI0/1/0, changed state to up
Apr 30 23:17:38.889: ISDN BR0/3/0 **ERROR**: L3_Go: Multi nlcb DL_EST, cid 0x2B30 cr 0xEF ev 0x300 ces 1
Apr 30 23:17:38.889: ISDN BR0/3/0 Q931: TX -> CALL_PROC pd = 8 callref = 0xEF
Channel ID i = 0x89
Exclusive, B1
Apr 30 23:17:39.025: ISDN BR0/1/0 Q931: TX -> SETUP pd = 8 callref = 0x6C
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x81
Preferred, B1
Calling Party Number i = 0x0183, '335xxxxxxx'
Plan:ISDN, Type:Unknown
Called Party Number i = 0xA1, '339xxxxxxx'
Plan:ISDN, Type:National
Sending Complete
Apr 30 23:17:39.117: ISDN BR0/1/0 Q931: RX <- CALL_PROC pd = 8 callref = 0xEC
Channel ID i = 0x89
Exclusive, B1
Apr 30 23:17:39.465: ISDN BR0/1/0 Q931: RX <- DISCONNECT pd = 8 callref = 0xEC
Cause i = 0x8281 - Unallocated/unassigned number
Progress Ind i = 0x8288 - In-band info or appropriate now available
Apr 30 23:17:39.473: ISDN BR0/3/0 Q931: TX -> DISCONNECT pd = 8 callref = 0xEF
Cause i = 0x8081 - Unallocated/unassigned number
Progress Ind i = 0x8288 - In-band info or appropriate now available
Apr 30 23:17:39.541: ISDN BR0/3/0 Q931: RX <- RELEASE pd = 8 callref = 0x6F
Apr 30 23:17:39.541: ISDN BR0/3/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xEF
Apr 30 23:17:39.549: ISDN BR0/1/0 Q931: TX -> RELEASE pd = 8 callref = 0x6C
Apr 30 23:17:39.605: ISDN BR0/1/0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0xEC
Apr 30 23:17:50.613: ISDN BR0/3/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2

[ketVet]

Sulle voice-port delle BRI applica AddZero-Telecom che di seguito è:

Codice: Seleziona tutto

voice translation-rule 1
 rule 2 /^32\([0,3,7-9]\)\(.*\)/ /032\1\2/
 rule 3 /^33\([0,3-9]\)\(.*\)/ /033\1\2/
 rule 4 /^34\([0,3,6-9]\)\(.*\)/ /034\1\2/
 rule 6 /^36\([0,3,6,8]\)\(.*\)/ /036\1\2/
 rule 8 /^38\([0,3,8,9]\)\(.*\)/ /038\1\2/
 rule 9 /^39\([0-3]\)\(.*\)/ /039\1\2/
 rule 15 /^\(\)/ /00\1/
!
!
voice translation-profile AddZero-Telecom
 translate calling 1

[mssdnl]

Adesso vado dal cliente e lo provo ma tutto questo codice cosa significa? Scusami ma vorrei capire

[mssdnl]

Non mi funziona....
Nelle voice-port delle bri ho messo
voice-port 0/1/0
translation-profile incoming AddZero-Telecom

[mssdnl]

Questo è il nuovo debug isdn q931

May 6 17:26:40.563: ISDN BR0/1/1 Q931: L3_ShutDown: Shutting down ISDN Layer 3
May 6 17:26:40.615: %LINK-3-UPDOWN: Interface BRI0/1/1, changed state to down
May 6 17:26:40.759: ISDN BR0/3/0 Q931: RX <- SETUP pd = 8 callref = 0x19
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Exclusive, B1
Calling Party Number i = 0x0183, '335xxxxxxx'
Plan:ISDN, Type:Unknown
Called Party Number i = 0xA1, '644xxxxxx'
Plan:ISDN, Type:National
Sending Complete
May 6 17:26:40.775: ISDN BR0/1/1 Q931: Applying typeplan for sw-type 0x1 is 0x0 0x1, Calling num 03357660463
May 6 17:26:40.775: ISDN BR0/1/1 **ERROR**: handle_l2d_srq_mail: Layer 1 inactive
May 6 17:26:40.787: ISDN BR0/3/0 Q931: TX -> CALL_PROC pd = 8 callref = 0x99
Channel ID i = 0x89
Exclusive, B1
May 6 17:26:40.827: %LINK-3-UPDOWN: Interface BRI0/1/1, changed state to up
May 6 17:26:41.787: ISDN BR0/1/1 Q931: TX -> SETUP pd = 8 callref = 0x37
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x81
Preferred, B1
Calling Party Number i = 0x0183, '0335xxxxxxx'
Plan:ISDN, Type:Unknown
Called Party Number i = 0xA1, '339xxxxxxx'
Plan:ISDN, Type:National
Sending Complete
May 6 17:26:41.875: ISDN BR0/1/1 Q931: RX <- CALL_PROC pd = 8 callref = 0xB7
Channel ID i = 0x89
Exclusive, B1
May 6 17:26:41.991: ISDN BR0/1/1 Q931: RX <- DISCONNECT pd = 8 callref = 0xB7
Cause i = 0x8281 - Unallocated/unassigned number
Progress Ind i = 0x8288 - In-band info or appropriate now available
May 6 17:26:41.999: ISDN BR0/3/0 Q931: TX -> DISCONNECT pd = 8 callref = 0x99
Cause i = 0x8081 - Unallocated/unassigned number
Progress Ind i = 0x8288 - In-band info or appropriate now available
May 6 17:26:42.059: ISDN BR0/3/0 Q931: RX <- RELEASE pd = 8 callref = 0x19
May 6 17:26:42.063: ISDN BR0/3/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x99
May 6 17:26:42.067: ISDN BR0/1/1 Q931: TX -> RELEASE pd = 8 callref = 0x37
May 6 17:26:42.115: ISDN BR0/1/1 Q931: RX <- RELEASE_COMP pd = 8 callref = 0xB7
May 6 17:26:54.935: ISDN BR0/1/1 Q931: Ux_DLRelInd: DL_REL_IND received from L2
May 6 17:26:55.803: ISDN BR0/3/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2

[ketVet]

Ciao,
puoi verificare la borchia ISDN?

May 6 17:26:40.775: ISDN BR0/1/1 **ERROR**: handle_l2d_srq_mail: Layer 1 inactive

[mssdnl]

verificare in che senso!!!
cosa devo verificare visto che se faccio una deviazione su un'urbana funziona? ti faccio vedere un debug sun una deviazione su interburbana:

Apr 30 23:16:30.821: %LINK-3-UPDOWN: Interface BRI0/3/0, changed state to up
Apr 30 23:16:30.893: ISDN BR0/3/0 Q931: RX <- SETUP pd = 8 callref = 0x67
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Exclusive, B1
Calling Party Number i = 0x0183, '335xxxxxxx'
Plan:ISDN, Type:Unknown
Called Party Number i = 0xA1, '644xxxxxx'
Plan:ISDN, Type:National
Sending Complete
Apr 30 23:16:30.905: ISDN BR0/1/0 Q931: Applying typeplan for sw-type 0x1 is 0x0 0x1, Calling num 3357660463
Apr 30 23:16:30.909: ISDN BR0/1/0 **ERROR**: handle_l2d_srq_mail: Layer 1 inactive
Apr 30 23:16:30.961: %LINK-3-UPDOWN: Interface BRI0/1/0, changed state to up
Apr 30 23:16:31.785: ISDN BR0/3/0 **ERROR**: L3_Go: Multi nlcb DL_EST, cid 0x2B2D cr 0xE7 ev 0x300 ces 1
Apr 30 23:16:31.785: ISDN BR0/3/0 Q931: TX -> CALL_PROC pd = 8 callref = 0xE7
Channel ID i = 0x89
Exclusive, B1
Apr 30 23:16:31.921: ISDN BR0/1/0 Q931: TX -> SETUP pd = 8 callref = 0x6B
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x81
Preferred, B1
Calling Party Number i = 0x0183, '335xxxxxxx'
Plan:ISDN, Type:Unknown
Called Party Number i = 0xA1, '0232xxxxxx'
Plan:ISDN, Type:National
Sending Complete
Apr 30 23:16:32.013: ISDN BR0/1/0 Q931: RX <- CALL_PROC pd = 8 callref = 0xEB
Channel ID i = 0x89
Exclusive, B1
Apr 30 23:16:33.517: ISDN BR0/1/0 Q931: RX <- PROGRESS pd = 8 callref = 0xEB
Progress Ind i = 0x8288 - In-band info or appropriate now available
Apr 30 23:16:33.521: ISDN BR0/3/0 Q931: TX -> ALERTING pd = 8 callref = 0xE7
Progress Ind i = 0x8288 - In-band info or appropriate now available
Apr 30 23:16:37.221: ISDN BR0/1/0 Q931: RX <- ALERTING pd = 8 callref = 0xEB
Progress Ind i = 0x8288 - In-band info or appropriate now available
Apr 30 23:16:45.541: ISDN BR0/1/0 Q931: RX <- CONNECT pd = 8 callref = 0xEB
Progress Ind i = 0x8182 - Destination address is non-ISDN
Connected Number i = 0x00C3
Apr 30 23:16:45.545: ISDN BR0/1/0 Q931: TX -> CONNECT_ACK pd = 8 callref = 0x6B
Apr 30 23:16:45.549: ISDN BR0/3/0 Q931: TX -> CONNECT pd = 8 callref = 0xE7
Channel ID i = 0x89
Exclusive, B1
Progress Ind i = 0x8182 - Destination address is non-ISDN
Apr 30 23:16:45.649: ISDN BR0/3/0 Q931: RX <- CONNECT_ACK pd = 8 callref = 0x67
!
!
!
Apr 30 23:16:48.497: ISDN BR0/3/0 Q931: RX <- DISCONNECT pd = 8 callref = 0x67
Cause i = 0x8090 - Normal call clearing
Progress Ind i = 0x8288 - In-band info or appropriate now available
Apr 30 23:16:48.505: ISDN BR0/3/0 Q931: TX -> RELEASE pd = 8 callref = 0xE7
Apr 30 23:16:48.505: ISDN BR0/1/0 Q931: TX -> DISCONNECT pd = 8 callref = 0x6B
Cause i = 0x8090 - Normal call clearing
Apr 30 23:16:48.581: ISDN BR0/3/0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x67
Apr 30 23:16:48.605: ISDN BR0/1/0 Q931: RX <- RELEASE pd = 8 callref = 0xEB
Apr 30 23:16:48.605: ISDN BR0/1/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x6B

[ketVet]

Direi che l'errore è qui:

Apr 30 23:17:39.465: ISDN BR0/1/0 Q931: RX <- DISCONNECT pd = 8 callref = 0xEC
Cause i = 0x8281 - Unallocated/unassigned number

Ma stai usando presso un tuo cliente?

[mssdnl]

Si io penso che il problema sia nell'UC520, e il codice che mi hai spedito in precedenza potrebbe essere utile, nelle voice port ho inserito questo comando
translation-profile incoming AddZero-Telecom
è giusto?
che pensi che potrei fare altrimenti

[lorbellu]

Ciao,

Dal debug appare che il problema deriva dall'errato tipo di plan type sulla chiamata diretta al numero a cui si devia

Calling Party Number i = 0x0183, '335xxxxxxx'
Plan:ISDN, Type:Unknown
Called Party Number i = 0xA1, '339xxxxxxx'
Plan:ISDN, Type:National
Sending Complete
Apr 30 23:17:39.117: ISDN BR0/1/0 Q931: RX <- CALL_PROC pd = 8 callref = 0xEC
Channel ID i = 0x89
Exclusive, B1
Apr 30 23:17:39.465: ISDN BR0/1/0 Q931: RX <- DISCONNECT pd = 8 callref = 0xEC
Cause i = 0x8281 - Unallocated/unassigned number

Come si vede dal debug il numero 339XXXXX (numero a cui vengono deviate le chiamate) é corretto ma ciò che appare sbagliato é il tipo di type che infatti dovrebbe essere unknown anzichè national.
In questo caso infatti il CME cerca di piazzare la chiamata sulla PSTN come nazionale, di contro però la centrale non riconosce il numero ed infatti risponde che il numero non é allocato e quindi é sconosciuto.
Puoi agire in due modi:
1) Applica il seguente comando sulle BRI

interface BRI0/1/0
isdn map address 3.* plan unknown type unknown

2) Crea un voice translation profile che applichi il corretto tipo di chiamata ed applicalo in uscita alle dial-peer utilizzate per impegnare la PSTN

voice translation-rule 101
rule 1 /^000\([1-9]*\)/ /000\1/ type any unknown
rule 2 /^00\([1-9]*\)/ /0\1/ type any national
rule 3 /^0\([1-9]*\)/ /\1/ type any unknown
!
!
voice translation-profile CorrectCallForward
translate called 101
!
dial-peer voice 1 pots
translation-profile outgoing CorrectCallForward
destination-pattern 0T

Personalmente sceglierei la 2 perchè mantiene una segnalazione più precisa, per il resto la 1 é sicuramente funzionante.
Facci sapere