Allora ho aggiornato la IOS ora ho 
Codice: Seleziona tutto
Cisco IOS Software, C1700 Software (C1700-SPSERVICESK9-M), Version 12.4(9)T1
con la seguente configurazione
Codice: Seleziona tutto
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
no logging buffered
enable secret 5 XXXXXXXXXX
!
aaa new-model
!
!
aaa authentication login default local
aaa authorization exec default local
!
aaa session-id common
!
resource policy
!
voice-card 1
!
voice-card 2
!
ip cef
!
!
!
!
ip name-server 212.216.172.62
!
!
!
voice service voip
 allow-connections sip to sip
 sip
  registrar server expires max 600 min 60
!
!
voice class codec 1
 codec preference 1 g711alaw
 codec preference 2 g711ulaw
 codec preference 3 g729r8
!
!
!
!
!
!
!
voice register global
 mode cme
 max-dn 144
 max-pool 24
!
voice register dn  10
 number 2000
!
voice register pool  1
 id mac AAAA.BBBB.CCCC
 number 1 dn 10
!
!
!
!
!
username XXXXXXXXXX privilege 15 secret 5 XXXXXXXXXX
!
!
!
!
!
interface ATM0/0
 description INTERFACCIA ATM/ADSL
 bandwidth 4382
 no ip address
 no ip route-cache cef
 no ip route-cache
 no ip mroute-cache
 no atm ilmi-keepalive
 dsl operating-mode auto
 hold-queue 224 in
 pvc 8/35
  encapsulation aal5mux ppp dialer
  dialer pool-member 1
 !
!
interface FastEthernet0/0
 description $ETH-LAN$
 ip address 192.168.0.1 255.255.255.0
 ip nat inside
 speed auto
!
interface Dialer0
 description DIALER ALICE-ADSL
 bandwidth 4382
 ip address negotiated
 ip nat outside
 encapsulation ppp
 ip tcp header-compression
 dialer pool 1
 dialer-group 1
 ppp pap sent-username XXXXXXXXXX password 7 XXXXXXXXXX
!
ip default-gateway 192.168.0.1
ip route 0.0.0.0 0.0.0.0 Dialer0
!
!
ip http server
no ip http secure-server
ip nat inside source list 101 interface Dialer0 overload
ip nat inside source static tcp 192.168.0.2 4949 interface Dialer0 4949
ip nat inside source static tcp 192.168.0.2 5060 interface Dialer0 5060
ip nat inside source static tcp 192.168.0.2 4711 interface Dialer0 99
ip nat inside source static tcp 192.168.0.2 8080 interface Dialer0 8080
ip nat inside source static tcp 192.168.0.2 80 interface Dialer0 80
ip nat inside source static tcp 192.168.0.2 4662 interface Dialer0 4662
ip nat inside source static tcp 192.168.0.2 22 interface Dialer0 10022
ip nat inside source static tcp 192.168.0.2 4242 interface Dialer0 4242
ip nat inside source static udp 192.168.0.2 4242 interface Dialer0 4242
ip nat inside source static udp 192.168.0.2 4662 interface Dialer0 4662
ip nat inside source static tcp 192.168.0.2 23 interface Dialer0 23
ip nat inside source static tcp 192.168.0.2 9090 interface Dialer0 9090
!
access-list 101 permit ip host 192.168.0.2 any
!
control-plane
!
!
!
voice-port 1/0
!
voice-port 1/1
!
!
!
!
!
!
dial-peer voice 1 voip
 session target ipv4:192.168.1.8
 incoming called-number 18
 codec g711ulaw
!
sip-ua
 authentication username XXXXXXXXXX password XXXXXXXXXX
 retry invite 4
 retry response 3
 retry bye 2
 retry cancel 2
 registrar ipv4:194.221.62.198:5060 expires 3600
 sip-server ipv4:194.221.62.198:5060
!
!
telephony-service
 max-conferences 4 gain -6
 transfer-system full-consult
!
!
line con 0
line aux 0
line vty 0 4
 password 7 XXXXXXXXXX
!
end
Ma devo aver fatto confusione,
perchè non si registra ovvero ho l'impressione che non ci provi proprio,
infatti se tento con
ottengo il seguente risultato
Codice: Seleziona tutto
Line          peer           expires(sec)  registered
============  =============  ============  ===========
qualche dritta??
grazie in anticipo!!