Cisco 2610 e WIC-1ADSL

[HdnLuca]

Salve a tutti,
ho un router CISCO 2610-I-M con ios 12.3(20), installando una wic-1adsl
attengo sempre l'errore:
"Unknown WIC in slot(0/0), wic card has an unknown id of 0x2E "
Sapete indicarmi quale versione l'IOS riconosce la mia scheda, ed i requisiti per installarlo?

Grazie a tutti

Allego lo show ver.

Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.3(20), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Tue 08-Aug-06 20:50 by kesnyder
Image text-base: 0x80008098, data-base: 0x80CE7FC4

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-I-M), Version 12.3(20), RELEASE SOFTWARE (fc2)

Router uptime is 16 minutes
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.123-20.bin"

cisco 2610 (MPC860) processor (revision 0x202) with 45056K/4096K bytes of memory
.
Processor board ID JAB03140BJX (420675274)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

[[Dj][DMX]]

Temo tu debba utilizzare una 12.4, però quanta ram/flash hai?

[jbg70]

Mi dispiace contraddire un coamminstratore, ma e' sufficiente una 12.3 e forse anche una 12.2 con qualche feature, ma uno sguardo sul sito cisco chiarirebbe ogni dubbio.

Questa funziona sicuramente (ci sto postando ora!):
flash:c2600-ik9o3s3-mz.123-20.bin
Credo che tutte le 12.3 del 2610, anche IP BASE supportino la wic adsl, per cui sospetto che la wic o lo slot siano danneggiati.

Saluti.

[livan74]

La versione di IOS utilizzata dal router di HdnLuca NON supporta la WIC ADSL, la prima versione di IOS che la supporta è la 12.2(15)T16 e l'ultima è la 12.3(24) e solo per una sono necessari 8/32 mega di memoria, per le altre la memoria deve essere massimizzata a 16/64.
In questo momento il mio 2610 utilizza IOS : c2600-ik9o3s3-mz.123-22.bin con 16/64 mega di memoria.

Per informazione consultare il sito Cisco all'indirizzo : http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

[maggiore81]

Salve, mi unisco alla discussione:
io ho un 2611 con la 12.3(24) con 16F/64D - Il router vede la scheda ma non ho idea della configurazione. da inserirgli per una ADSL:

premetto che ho una sufficente pratica con router e switch cisco.
Ho rimosso la WIC1-ADSL da un 1721 (che ho sostituito con un 837) e ora la ho inserita in questo 2611 che è pronto da montare in armadio per una linea ADSL. Tra poco gli aggiungerò in armadio anche un 2610 con WIC1T per HDSL.

Ritornando al 2611 in questione, in pratica ho la ATM0/0 ma non la interfaccia punto punto.
---------------------------
gateway#show ip int brief
Interface IP-Address OK? Method Status Prot
ocol
ATM0/0 unassigned YES manual down down

Ethernet0/0 192.168.0.254 YES NVRAM up down

Ethernet0/1 unassigned YES NVRAM administratively down dow
---------------------------



devo configurare una rete con adsl RFC1483 ed un ip statico (per ora).

Allego show ver e show run (la configurazione è ancora una bozza incompleta)

gateway(config)#do show ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(24), RELEASE SOFTWARE (f
c4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Thu 18-Oct-07 14:26 by stshen
Image text-base: 0x80008098, data-base: 0x81A1E1E8

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

gateway uptime is 5 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ik9o3s3-mz.123-24.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

cisco 2611 (MPC860) processor (revision 0x203) with 61440K/4096K bytes of memory
.
Processor board ID JAD04140AVN (3707191581)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

-------------------------------------------------------------------
-------------------------------------------------------------------


!
version 12.3
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service internal
service sequence-numbers
!
hostname gateway
!
boot-start-marker
boot-end-marker
!
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 4096 notifications
no logging console
no logging monitor
enable password 7 xxxxxxxxxx
!
clock timezone CET 1
no aaa new-model
ip subnet-zero
no ip source-route
no ip gratuitous-arps
ip cef
!
!
ip domain round-robin
ip domain name xxxxxxxxx
ip name-server 217.97.32.2
ip name-server 217.97.32.7
!
no ip bootp server
ip multicast-routing
ip inspect max-incomplete low 300
ip inspect max-incomplete high 400
ip inspect one-minute low 500
ip inspect one-minute high 600
ip inspect udp idle-time 20
ip inspect tcp idle-time 60
ip inspect tcp synwait-time 45
ip inspect tcp max-incomplete host 300 block-time 0
ip audit po max-events 100
!
!
!
!
!
!
!
!
!
!
!
!
username xxxxxxxxx
!
!
ip tcp selective-ack
ip tcp synwait-time 10
ip ssh time-out 90
!
!
!
!
!
interface ATM0/0
bandwidth 256
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
atm ilmi-keepalive
dsl operating-mode itu-dmt
hold-queue 224 in
!
interface Ethernet0/0
ip address 192.168.0.254 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
no ip mroute-cache
full-duplex
no cdp enable
hold-queue 100 in
!
interface Ethernet0/1
no ip address
shutdown
half-duplex
!
ip nat translation timeout 3600
ip nat translation tcp-timeout 1200
ip nat translation udp-timeout 100
ip nat translation finrst-timeout 15
ip nat translation syn-timeout 45
ip nat translation icmp-timeout 120
no ip http server
no ip http secure-server
ip classless
!
ip pim bidir-enable
!
!
!
!
!
!
banner login ^CCC
You are connected to $(hostname).$(domain) on line $(line).
If you are not authorized to access this system, disconnect now.

THIS IS FOR AUTHORIZED USE ONLY

Unauthorized or improper use of this system may result in
administrative disciplinary action and civil and criminal penalties.
By continuing to use this system you indicate your awareness of and consent
to these terms and conditions of use. LOG OFF IMMEDIATELY if you do not
agree to the conditions stated in this warning.

Network Administrator: xxxxxxxx
^C
!
line con 0
login local
transport output telnet
stopbits 1
line aux 0
login local
transport preferred none
transport output telnet
stopbits 1
line vty 0 4
login local
transport preferred ssh
transport input ssh
transport output telnet
flowcontrol software
!
scheduler max-task-time 5000
ntp server 192.43.244.18
ntp server 193.204.114.105
!
end