SOHO97 e VPN

[blakky]

Facci rivedere la config aggiornata.
Se non lo hai già fatto elimina la parte di configurazione riguardante la vpn pptp.

interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password lpW.MGeEHg0ISQZq encrypted
passwd lpW.MGeEHg0ISQZq encrypted
hostname pixfirewall
domain-name xxxxxxxxxx.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outside_access_in deny icmp any host 10.17.22.3
access-list outside_access_in deny icmp any host 10.17.22.4
access-list outside_access_in deny icmp any host 10.17.22.5
access-list outside_access_in deny icmp any host 10.17.22.6
access-list outside_access_in deny icmp any host 10.17.22.7
access-list outside_inbound_nat0_acl permit ip any Pool_VPN 255.255.255.240
access-list inside_authentication_LOCAL permit tcp ReteHdsl 255.255.255.0 any
access-list inside_authentication_LOCAL permit tcp MPLS_Eurospin 255.0.0.0 any
access-list vpnusers_splitTunnelAcl permit ip ReteHdsl 255.255.255.0 any
access-list vpnusers_splitTunnelAcl permit ip MPLS_Eurospin 255.0.0.0 any
access-list vpnusers_splitTunnelAcl permit ip host AS400 any
access-list inside_outbound_nat0_acl permit ip ReteHdsl 255.255.255.0 Pool_VPN 255.255.255.240
access-list inside_outbound_nat0_acl permit ip MPLS_Eurospin 255.0.0.0 Pool_VPN 255.255.255.240
access-list inside_outbound_nat0_acl permit ip host AS400 Pool_VPN 255.255.255.240
access-list outside_cryptomap_dyn_20 permit ip any Pool_VPN 255.255.255.240
no pager
logging on
icmp deny any outside
icmp permit any inside
mtu outside 1500
mtu inside 1500
ip address outside 10.17.22.250 255.255.255.0
ip address inside 192.168.10.250 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool USER_VPN 192.168.10.70-192.168.10.75
pdm history enable
arp timeout 14400
global (outside) 1 interface
global (inside) 2 RouterA
nat (outside) 0 access-list outside_inbound_nat0_acl outside
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 AS400 255.255.255.255 0 0
nat (inside) 1 ReteHdsl 255.255.255.0 dns 0 0
nat (inside) 1 MPLS_Verona 255.255.0.0 0 0
nat (inside) 1 HDSL_Voice 255.0.0.0 0 0
nat (inside) 1 MPLS_Eurospin 255.0.0.0 dns 0 0
static (inside,outside) 10.17.22.7 Decio dns netmask 255.255.255.255 0 0
static (inside,outside) 10.17.22.3 ubuntu dns netmask 255.255.255.255 0 0
static (inside,outside) 10.17.22.4 Pluto dns netmask 255.255.255.255 0 0
static (inside,outside) 10.17.22.5 MailServer dns netmask 255.255.255.255 0 0
static (inside,outside) 10.17.22.6 Canemorto dns netmask 255.255.255.255 0 0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.17.22.254 1
route inside 0.0.0.0 0.0.0.0 RouterA 2
route inside MPLS_Eurospin 255.0.0.0 RouterA 1
route outside MPLS_Verona 255.255.0.0 RouterA 2
route inside AS400 255.255.255.255 RouterA 1
route inside Pool_VPN 255.255.255.240 RouterA 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa authentication match inside_authentication_LOCAL inside LOCAL
http server enable
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
no floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map_2 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map_2 20 set transform-set ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map_1 65535 ipsec-isakmp dynamic outside_dyn_map_1
crypto map outside_map_2 65535 ipsec-isakmp dynamic outside_dyn_map_2
crypto map outside_map_2 client authentication LOCAL
crypto map outside_map_2 interface outside
isakmp enable outside
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption 3des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup vpnusers address-pool USER_VPN
vpngroup vpnusers dns-server 151.99.125.1 151.99.0.100
vpngroup vpnusers default-domain eurospinlazio.com
vpngroup vpnusers split-tunnel vpnusers_splitTunnelAcl
vpngroup vpnusers idle-time 1800
vpngroup vpnusers password ********
telnet ReteHdsl 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
management-access inside
console timeout 0
vpdn group PPTP-VPDN-GROUP accept dialin pptp
vpdn group PPTP-VPDN-GROUP ppp authentication pap
vpdn group PPTP-VPDN-GROUP ppp authentication chap
vpdn group PPTP-VPDN-GROUP ppp authentication mschap
vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto
vpdn group PPTP-VPDN-GROUP client configuration address local USER_VPN
vpdn group PPTP-VPDN-GROUP client configuration dns 151.99.125.1 151.99.0.100
vpdn group PPTP-VPDN-GROUP pptp echo 60
vpdn group PPTP-VPDN-GROUP client authentication local
vpdn username Giancarlo password *********
vpdn enable inside
dhcpd address 192.168.10.201-192.168.10.249 inside
dhcpd dns MailServer 151.99.125.1
dhcpd wins MailServer
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd domain eurospinlazio.com
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
Cryptochecksum:81719d1e7eb41168bd3c8c12fda630b2
: end

[Wizard]

In parole povere tu entri in vpn client, raggiungi la rete interna direttamente connessa alla inside del pix ma non raggiungi le altre sedi collegate in mpls?
Se è così mancano le route inside verso quelle reti sul PIX.
Per il ping togli pure queste regole che non servono:

access-list outside_access_in deny icmp any host 10.17.22.3
access-list outside_access_in deny icmp any host 10.17.22.4
access-list outside_access_in deny icmp any host 10.17.22.5
access-list outside_access_in deny icmp any host 10.17.22.6
access-list outside_access_in deny icmp any host 10.17.22.7

[blakky]

In parole povere tu entri in vpn client, raggiungi la rete interna direttamente connessa alla inside del pix ma non raggiungi le altre sedi collegate in mpls?
Se è così mancano le route inside verso quelle reti sul PIX.
Per il ping togli pure queste regole che non servono:

access-list outside_access_in deny icmp any host 10.17.22.3
access-list outside_access_in deny icmp any host 10.17.22.4
access-list outside_access_in deny icmp any host 10.17.22.5
access-list outside_access_in deny icmp any host 10.17.22.6
access-list outside_access_in deny icmp any host 10.17.22.7

Quelle sono gli ip delle nat statiche, vieto il ping dall'esterno.

[blakky]

Ho cancellato tutta la parte relativa alle VPN sia PPTP che ipsec vorrei ricominciare da 0.

Cosa mi conviene fare usare il wizard o no.

Senz ail Wizard non saprei dove iniziare mi serve aiuto.

Grazie.

[Wizard]

Si, usa pure il wizard del pdm anche se poi alcune cose le dovremo andare ad aggiungere

[blakky]

ok grazie allora procedo poi mi dici le modifiche da aggiungere.

[blakky]

Perche se io configuro il mio pc con gateway predefinito il pix non riesco a pingare la rete mpls esterna?

[Wizard]

Perchè sul pix non ci sono le rotte...

[blakky]

Perchè sul pix non ci sono le rotte...

Spiegati meglio perchè di rotte ne ho messo di tutti i colori.

il Pix ha indirizzo 192.168.10.250, il router lo pingo 192.168.10.1 e tutti i pc della stessa rete:
devo pingare anche la rete 192.168.x.x e tutta la rete 172.x.x.x come faccio?

[Wizard]

Anh, no, scusa...problema...:
Il PIX non fa routing sulla stessa interfaccia! C'è poco da fare ma è così!
Se prendi l'asa che ti abbiamo proposto con la versione 8 lo fa.
Per ora 6 costretto a mettere delle rotte statiche sulla tua macchina.

[blakky]

Si ho capito ok.....
ma io le rotte statiche le ho messe ma niente da fare.

[Wizard]

Le devi mettere sul tuo PC non sul pix.
In questo modo devono andare x forza.

[blakky]

Lo stesso discorso vale anche quando mi collego tramite VPN client?

[blakky]

Si, usa pure il wizard del pdm anche se poi alcune cose le dovremo andare ad aggiungere

Quali sono le cose che vanno aggiunte?

[Wizard]

Si, metti delle rotte statiche sulla tua macchina permaneti che durano sempre anche in vpn:

Dal prompt di dos della tua macchina la sintassi è questa:

route ADD 157.0.0.0 MASK 255.0.0.0 157.55.80.1
destinazione^ ^mask ^gateway