cisco soho 97

[luca71]

Salve, premetto subito che conosco pochissimo i router Cisco; il mio problema è questo: ho un file .txt (non estrapolato da me) con la configurazione di un router cisco soho 97 dato dalla telecom con abbonamento interbusiness su una rete windows: siccome dai fogli della telecom capisco ben poco, qual'è il parametro sulla configurazione del router che mi dice l'indirizzo IP pubblico statico?
Per usare l'area di lavoro sul web di Windows SBS 2003 forse devo aprire alcune porte sul router ma non ho username e password per entrare nel router: o meglio, sul file .txt ci sono alcuni parametri, li ho provati ma non funzionano. Il router è collegato tramite porta console, la procedura di reset è uguale al cisco 837 (trovata sempre su questo forum)? Esiste una procedura che mi resetti solo username e password? Grazie mille.
Luca

[luca71]

Grazie mille, scusatemi ma sono poco pratico del forum.
La procedura riporta il router ai valori di default della fabbrica o elimina solo le password?

[RJ45]

Elimina le password e ti consente di accedere alla attuale configurazione della macchina.

[luca71]

Perdonatemi, ho seguito la procedura ma quando provo ad entrare nel privilege mode con il comando enable la schermata cambia da Router> a Password: che ovviamente non conosco...
Se volete posso postare tutto quello che è apparso dopo il comando reset

[TheIrish]

Vuol dire che hai seguito male la procedura o che il sistema è talmente anziano da avere caratteristiche diverse. Prova a postare il dump della console.

[luca71]

ecco tuto quello che è apparso sulla consolle dell'H.T.

Ôú
System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
C800/SOHO series (Board ID: 22-128) platform with 65536 Kbytes of main memory


monitor: command "boot" aborted due to user interrupt
rommon 1 > confreg 0x2142"
monitor: missing closing "
rommon 2 > resetú
System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
C800/SOHO series (Board ID: 22-128) platform with 65536 Kbytes of main memory

program load complete, entry point: 0x80013000, size: 0x54dfec
Self decompressing the image : #################################################
############################################ [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software, SOHO97 Software (SOHO97-K9OY1-M), Version 12.3(7)T8, RELEASE
SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 11-Mar-05 00:51 by yiyan
Image text-base: 0x800131C0, data-base: 0x809D0E10


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco SOHO97 (MPC857DSL) processor (revision 0x500) with 58983K/6553K bytes of m
emory.
Processor board ID FCZ091743LB (2491784053), with hardware revision 0000
CPU rev number 7
1 Ethernet interface
1 ATM interface
128K bytes of NVRAM.
8192K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)

no aaa new-model
^
% Invalid input detected at '^' marker.

%NAT: Error activating CNBAR on the interface Ethernet0
%NAT: Error activating CNBAR on the interface ATM0.1


Press RETURN to get started!


*Mar 1 00:00:11.519: %SYS-6-LOGGERSTART: Logger process started
*Mar 1 00:00:11.619: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
*Mar 1 00:00:12: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Mar 1 00:00:12: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, cha
nged state to up
*Mar 1 00:00:13: %LINK-3-UPDOWN: Interface ATM0, changed state to down
*Mar 1 00:00:14: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:14: %LINEPRe ATM0, changed state to down
*Mar 1 00:00:15: %SYS-5-RESTART: System restarted --
Cisco IOS Software, SOHO97 Software (SOHO97-K9OY1-M), Version 12.3(7)T8, RELEASE
SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 11-Mar-05 00:51 by yiyan
*Mar 1 00:00:15: %SNMP-5-COLDSTART: SNMP agent on host router is undergoing a c
old start
*Mar 1 00:00:49: %LINK-3-UPDOWN: Interface ATM0, changed state to up
*Mar 1 00:00:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed
state to up
router>enable
Password:
% Password: timeout expired!
Password:
Password:
% Bad passwords

router>
router>enable
Password:
Password:
% Password: timeout expired!
Password:
% Password: timeout expired!
% Bad passwords

router>

[TheIrish]

rommon 1 > confreg 0x2142"

Com'è che ci sono delle virgolette in fondo?

[luca71]

era scritto così nella procedura... comunque la schermata successiva era quella prevista

[luca71]

... la schermata successiva prevista si riferiva al comando
rommon 1 > confreg 0x2142"

quando ho dato il comando enable mi ha chiesto la password