help prima configurazione cisco 827

[sahachiel]

Salve
ho fatto la mia prima configurazione del mio cisco 827, potete controllarla e dirmi se va' bene?
devo collegare al router 827 un telefono euteliavoip, un router fonera+ e
poi vorrei aggiungere delle cose ma non ho capito come (emule)


Grazie a tutti


-----------------------------
configurazione
-----------------------------

Building configuration...

Current configuration : 1188 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname sahachiel
!
enable secret 5 $1$sEMn$jMms356h0CKWEcbMLDTLx/
!
ip subnet-zero
no ip source-route
no ip domain-lookup
ip name-server 208.67.222.222
ip name-server 208.67.220.220
!
no ip bootp server
!
!
!
interface Ethernet0
description HOME LAN
ip address 10.10.10.2 255.255.255.0
ip nat inside
shutdown
no cdp enable
hold-queue 100 out
!
interface ATM0
description ADSL INTERFACCIA ATM
no ip address
shutdown
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface Dialer0
description CONNESSIONE ALICE-ADSL
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
no cdp enable
ppp chap hostname alice
ppp chap password 7 1108150C1417
ppp pap sent-username alice password 7 104F05100612
!
ip nat inside source list 1 interface Dialer0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
!
!
access-list 1 permit 10.10.10.0 0.0.0.255
no cdp run
!
line con 0
stopbits 1
line vty 0 4
login
!
scheduler max-task-time 5000
end

[Wizard]

1) Le interfaccie sono in shutdown (magari è fatto apposta)
2) Config minima ma corretta
3) Manca la parte firewall (se la ios te lo permette)

[sahachiel]

la mia versione è questa (penso)
Cisco Internetwork Operating System Software
IOS (tm) C820 Software (C820-Y6-M), Version 12.2(4)YA4, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

le interfacce adesso sono ON

per la parte firewall come mi consigliate?

[Wizard]

Posta tutto lo "sh ver"

[sahachiel]

Cisco Internetwork Operating System Software
IOS (tm) C820 Software (C820-Y6-M), Version 12.2(4)YA4, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Synched to technology version 12.2(5.4)T
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 27-Dec-02 11:43 by ealyon
Image text-base: 0x80013170, data-base: 0x8067CBD0

ROM: System Bootstrap, Version 12.1(1r)XB1, RELEASE SOFTWARE (fc1)
ROM: C820 Software (C820-Y6-M), Version 12.2(4)YA4, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

sahachiel uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c820-y6-mz.122-4.YA4.bin"

CISCO C827 (MPC855T) processor (revision 0x701) with 23552K/1024K bytes of memory.
Processor board ID JAD06090QVV (2320453514), with hardware revision 0000
CPU rev number 5
Bridging software.
1 Ethernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2102

[sahachiel]

mmm
ho un problemino, colelgo il router al computer, conf la scheda di rete cosi'

ip 10.10.10.23
255.255.255.0
gateway 10.10.10.2 (quello messo nella conf del router)

accendo il router ma se da console controllo mi dice sempre che

ethernet0 e atm0 sono shutdown

come faccio?

ho provato a fare:
enable
conf t
interface Ethernet0
no shutdown
interface Atm0
no shutdown

ma poi mi dice che va' shutdown

dove sbaglio?

Grazie

[Wizard]

ma poi mi dice che va' shutdown

cioè? come te lo dice?

[sahachiel]

risolto il fatto dello shutdown (era il cavo)

adesso pero' non si collega ad alice.

sahachiel#sh ip int brief
Interface IP-Address OK? Method Status Protocol
ATM0 unassigned YES NVRAM up up
Dialer0 unassigned YES NVRAM up up
Ethernet0 10.10.10.2 YES NVRAM up up
Virtual-Access1 unassigned YES unset up down


cosa posso fare? e' la mia prima conf e non voglio assillarvi troppo, pero' aiutatemi

[sahachiel]

oltre la domanda di sopra, col cisco 827 si puo' fare un test sulla linea? tipo quelli dell'us robotics:
test f5 etc etc

grazie

[Wizard]

La dialer non prende l'ip pubblico...
Guada sta config base e adattala alla tua:

Codice: Seleziona tutto

service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
no service dhcp
!
hostname NomeRouter
!
enable password PASSWORDROUTER
!
ip subnet-zero
!
!
!
interface Ethernet0
ip address 10.0.0.138 255.255.255.0
ip nat inside
!
interface ATM0
no ip address
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
bundle-enable
dsl operating-mode auto
!
interface Dialer0
ip address negotiated
ip nat outside
encapsulation ppp
ip tcp header-compression passive
dialer pool 1
no cdp enable
ppp pap sent-username NOMEUTENTE password PAROLACHIAVE
!
ip nat inside source list 9 interface Dialer0 overload

ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
!
access-list 9 permit 10.0.0.0 0.0.0.255
dialer-list 1 protocol ip permit
!
line con 0
stopbits 1
line vty 0 4
password pippo
login
!
end

[sahachiel]

ciao
per adattarla a me, devo rifare gli stessi procendimenti della mia e i dati di sovrascrivono? o devo resettarlo di nuovo e rifare tutto?