Problema CISCO 827 Alice 7M

[frasty]

Ciao a tutti, ho qualche problema problema con un vecchio cisco 827 da quando Telecom mi ha upgradato ad ALICE 7M.

Dopo una giornata di collegamento, devo spegnere assolutamente il router altrimenti non riesco nemmeno a raggiungere GOOGLE.

Utilizzo anche programmi di P2P che aumentano il fatto di dover spegnere il router, a volte non mi risponde nemmeno al telnet e anche se risponde e riesco a loggarmi, se eseguo un SH RUN non mi viene mostrato nulla.

A questo punto, secondo voi, potrebbe essere un problema di IOS, considerando che sono già passato da una 12.1 alla presente 12.2 che è l'unica che posso montare con la memoria di base, ma che mi sembra abbia leggermente migliorato il comportamento.

Grazie per ogni eventuale aiuto.

Ciao Francesco.

Allego SH VER:

Cisco Internetwork Operating System Software
IOS (tm) C820 Software (C820-Y6-M), Version 12.2(8)T5, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 21-Jun-02 15:10 by ccai
Image text-base: 0x80013170, data-base: 0x806A1944

ROM: System Bootstrap, Version 12.1(1r)XB1, RELEASE SOFTWARE (fc1)

router uptime is 6 hours, 58 minutes
System returned to ROM by power-on
System image file is "flash:c820-y6-mz.122-8.t5.bin"

CISCO C827 (MPC855T) processor (revision 0x801) with 15360K/1024K bytes of memory.
Processor board ID JAD05250TWW (1823203364), with hardware revision 0000
CPU rev number 5
Bridging software.
1 Ethernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2102

e SH RUN:

Current configuration : 2277 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname router
!
enable secret 5 xxxxxxxxxxxxxxxxxxxxx
!
username xxxxxxxxxxxxxxx password 7 xxxxxxxxxxxxxxxx
username CRWS privilege 15 password 7 xxxxxxxxxxxxxxx
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
no ip source-route
ip domain-name alice.it
ip name-server 212.216.112.112
ip name-server 212.216.172.62
ip dhcp excluded-address 192.168.1.1 192.168.1.149
!
ip dhcp pool DHCP
network 192.168.1.0 255.255.255.0
domain-name alice.it
dns-server 212.216.112.112 212.216.172.62
netbios-node-type h-node
default-router 192.168.1.1
!
!
!
!
interface Ethernet0
ip address 192.168.1.1 255.255.255.0
ip nat inside
hold-queue 100 out
!
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface Dialer0
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username aliceadsl password 7 1108150C14170A081726
!
ip nat inside source list 101 interface Dialer0 overload
ip nat inside source static udp 192.168.1.5 55167 interface Dialer0 55167
ip nat inside source static tcp 192.168.1.5 6976 interface Dialer0 6976
ip nat inside source static tcp 192.168.1.4 4711 interface Dialer0 4711
ip nat inside source static udp 192.168.1.4 7500 interface Dialer0 7500
ip nat inside source static tcp 192.168.1.4 7000 interface Dialer0 7000
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
!
!
access-list 101 permit ip 192.168.1.0 0.0.0.255 any
dialer-list 1 protocol ip permit
banner motd ^C

Router Privato

-----------------------------------------------

Ogni accesso non autorizzato e' proibito
Unauthorized access is prohibited

-----------------------------------------------
^C
!
line con 0
exec-timeout 0 0
stopbits 1
line vty 0 4
exec-timeout 120 0
password 7 xxxxxxxxxxxxxx
login local
length 0
!
scheduler max-task-time 5000
end

[[Dj][DMX]]

No, ho montato spesso con successo quell'IOS su altri 827 e non da problemi di questo tipo.
Aggiungi alla configurazione le righe

ip nat translation timeout 300
ip nat translation tcp-timeout 250
ip nat translation udp-timeout 180
ip nat translation finrst-timeout 15
ip nat translation syn-timeout 10
ip nat translation dns-timeout 22

e sappimi dire.

[frasty]

Ok grazie, ho inserito le modifiche che mi hai suggerito, e ti farò sapere, ti allego anche i parametri della linea secondo me non è un gran chè:

router#sh dsl int atm 0
ATU-R (DS) ATU-C (US)
Modem Status: Showtime (DMTDSL_SHOWTIME)
DSL Mode: ITU G.992.1 (G.DMT)
ITU STD NUM: 0x01 0x1
Vendor ID: 'ALCB' 'BDCM'
Vendor Specific: 0x0000 0x544D
Vendor Country: 0x00 0xB5
Capacity Used: 99% 78%
Noise Margin: 11.5 dB 19.0 dB
Output Power: 19.5 dBm 12.0 dBm
Attenuation: 31.5 dB 17.5 dB
Defect Status: None None
Last Fail Code: None
Selftest Result: 0x00
Subfunction: 0x02
Interrupts: 3384 (1 spurious)
Activations: 1
SW Version: 3.670
FW Version: 0x1A04

Interleave Fast Interleave Fast
Speed (kbps): 6176 0 640 0
Reed-Solomon EC: 19092 0 0 1
CRC Errors: 194 0 4 1
Header Errors: 169 0 0 3
Bit Errors: 0 0
BER Valid sec: 0 0
BER Invalid sec: 0 0

DMT Bits Per Bin
00: 0 0 0 0 0 0 0 4 6 7 7 8 9 9 A A
10: A A A A A A 9 9 9 9 9 9 9 7 0 0
20: 0 0 0 0 0 0 9 A A A B B B C C C
30: C C C C C C C C C C C C C C C C
40: B C C C C 2 C C C C C C C B C B
50: B B B B B B B B B B B B B B B B
60: B B B B B B B B B B A A A A A A
70: A A A A A A A A A A A A A A A A
80: A A 9 8 8 9 9 9 9 9 9 9 9 9 9 9
90: 9 9 9 9 9 9 9 8 8 8 8 8 8 8 8 8
A0: 8 7 8 8 8 8 8 8 8 8 8 8 8 7 8 7
B0: 7 7 7 7 8 7 7 7 7 8 7 7 7 7 6 8
C0: 7 7 6 6 6 6 6 6 6 7 6 6 6 6 6 5
D0: 5 4 6 6 7 6 6 6 6 5 6 5 6 5 5 5
E0: 5 5 5 5 5 5 5 5 4 5 5 4 4 4 4 4
F0: 4 4 4 4 4 4 0 0 0 0 0 0 0 0 0 0