cisco 1921 flash

Tutto quello che ha a che fare con le infrastrutture (non le configurazioni)

Moderatore: Federico.Lagni

Rispondi
Avatar utente
anburg
Cisco fan
Messaggi: 63
Iscritto il: lun 21 apr , 2008 8:44 am

ciao a tutti
ho comperato sulla baia un cisco 1921 e hwic adsl
volendo aggiornare la ios ho dato "dir" per vedere cosa c'è nella flash directory questa la risposta

Router>en
Router#dir
Directory of usbflash0:/

1 -rw- 3064 May 3 2013 02:20:50 +00:00 cpconfig-19xx.cfg
2 drw- 0 May 3 2013 02:21:08 +00:00 ccpexp
238 -rw- 2464 May 3 2013 02:22:48 +00:00 home.shtml
239 -rw- 50215964 May 23 2013 13:15:46 +00:00 c1921-universalk9-mz.SPA.151-3.T4.bin

intanto perchè usbflash0 ?

poi volendo salvare la vecchia ios: copy flash tftp ... ecc ecc tutto bene. Dopo non è piu' stato possibile aggiornare la ios ma neanche ripetere il salvataggio della vecchia ios questo il risultato

%Error opening tftp://192.168.1.1/c1921-universalk9-mz.SPA.151-3.T4.bin (Timed out)

Possibile che sia partita la flash? Pero' mi sembra che al reboot sia tutto a posto premetto che ho poca esperienza. comunque all' avvio:

Proceed with reload? [confirm]

Oct 27 08:47:22.263: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.
System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.

Total memory size = 512 MB
CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled


Readonly ROMMON initialized
program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0


IOS Image Load Test
___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x2fe37e4
Self decompressing the image : ################################################################################################################################################################################################################################################################################################ [OK]

Smart Init is disabled. IOMEM set to: 10

Using iomem percentage: 10

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(3)T4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 24-May-12 01:16 by prod_rel_team


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco CISCO1921/K9 (revision 1.0) with 475136K/49152K bytes of memory.
Processor board ID FCZ1718C3SJ
2 Gigabit Ethernet interfaces
1 ATM interface
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249840K bytes of USB Flash usbflash0 (Read/Write)



Press RETURN to get started!


Jan 2 12:00:02.619: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = ipbasek9 and License = ipbasek9
Oct 27 08:49:09.635: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
Oct 27 08:49:09.635: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
Oct 27 08:49:09.635: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0/0/0, changed state to down
Oct 27 08:49:10.635: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0
Router>, changed state to up
Oct 27 08:49:10.635: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
Oct 27 08:49:14.791: %USBFLASH-5-CHANGE: usbflash0 has been inserted!
Oct 27 08:49:16.971: %SYS-5-CONFIG_I: Configured from memory by console
Oct 27 08:49:18.947: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
Oct 27 08:49:18.999: %LINK-5-CHANGED: Interface ATM0/0/0, changed state to administratively down
Oct 27 08:49:21.051: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(3)T4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 24-May-12 01:16 by prod_rel_team
Oct 27 08:49:21.255: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
Oct 27 08:49:21.867: %SYS-6-BOOTTIME: Time taken to reboot after reload = 121 seconds

se qualche anima pia mi aiuta ringrazio anticipatamente
ciao andrea
Rispondi