2611XM - Watchdog Timeout
Inviato: lun 20 nov , 2006 1:54 pm
Ciao,
è da un mese ormai che un router cisco mi riavvia in continuazione... meglio: mi si riavvia.. o qualcosa del genere ogni mattina tra le 8.20 e le 8.50...
E non si capisce il perchè.
ho collegato un portatile alla console e aperto una connessione con hyperterminal registrandone le scritture.
ho letto da qualche parte che si riavvia per non danneggiare la cpu.. qualcosa del genere.. questo Watchdog..
potete dirmi di piu?
è da un mese ormai che un router cisco mi riavvia in continuazione... meglio: mi si riavvia.. o qualcosa del genere ogni mattina tra le 8.20 e le 8.50...
E non si capisce il perchè.
ho collegato un portatile alla console e aperto una connessione con hyperterminal registrandone le scritture.
*** Watch Dog Timeout ***
PC = 0x800255b4, SP = 0x81cb6a20
C2600 platform with 131072 Kbytes of main memory
System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Copyright (c) 2003 by cisco Systems, Inc.
C2600 platform with 131072 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xe452c0
Self decompressing the image : ############################################################################################################################################################################################################################################ [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
00036B 0X00103980 C2611XM Dual Fast Ethernet
000020 0X00063D80 Quad port S/T interface Multi-BRI
0X000F3BB0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X0046C2B0
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 5Mb.
Using 3 percent iomem. [5Mb/128Mb]
Compliance with U.S. Export Laws and Regulations - Encryption
This product performs encryption and is regulated for export
by the U.S. Government.
This product is not authorized for use by persons located
outside the United States and Canada that do not have prior
approval from Cisco Systems, Inc. or the U.S. Government.
This product may not be exported outside the U.S. and Canada
either by physical or electronic means without PRIOR approval
of Cisco Systems, Inc. or the U.S. Government.
Persons outside the U.S. and Canada may not re-export, resell,
or transfer this product by either physical or electronic means
without prior approval of Cisco Systems, Inc. or the U.S.
Government.
%LINK-3-UPDOWN: Interface BRI1/1:1, changed state to down
%LINK-3-UPDOWN: Interface BRI1/1:2, changed state to down
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
program load complete, entry point: 0x80008000, size: 0x9cef30
Self decompressing the image : ############################################################################################################################################################################################### [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
00036B 0X0010A400 C2611XM Dual Fast Ethernet
000020 0X00063D80 Quad port S/T interface Multi-BRI
00502D UNKNOWN AIM
0X000F3BB0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X00472D30
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 5Mb.
Using 3 percent iomem. [5Mb/128Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(17d), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 14-Jan-04 20:21 by ccai
Image text-base: 0x8000808C, data-base: 0x8110FAEC
cisco 2611XM (MPC860P) processor (revision 0x400) with 125952K/5120K bytes of memory.
Processor board ID JHY0851K1V5 (989963992)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
2 FastEthernet/IEEE 802.3 interface(s)
4 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Press RETURN to get started!
*Mar 1 00:00:17.624: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down
*Mar 1 00:00:17.624: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
*Mar 1 00:00:18.377: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/0:1, changed state to down
*Mar 1 00:00:18.377: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/0:2, changed state to down
*Mar 1 00:00:18.614: %LINK-5-CHANGED: Interface BRI1/2, changed state to administratively down
*Mar 1 00:00:18.614: %LINK-5-CHANGED: Interface BRI1/1, changed state to administratively down
*Mar 1 00:00:18.614: %LINK-3-UPDOWN: Interface BRI1/1:1, changed state to down
*Mar 1 00:00:18.618: %LINK-3-UPDOWN: Interface BRI1/1:2, changed state to down
*Mar 1 00:00:18.818: %LINK-5-CHANGED: Interface BRI1/3, changed state to administratively down
*Mar 1 00:00:18.818: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/1:1, changed state to down
*Mar 1 00:00:18.818: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/1:2, changed state to down
*Mar 1 00:00:19.619: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/2, changed state to down
*Mar 1 00:00:19.619: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/1, changed state to down
*Mar 1 00:00:19.639: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:19.728: %LINK-3-UPDOWN: Interface BRI1/0, changed state to up
*Mar 1 00:00:20.196: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/3, changed state to down
*Mar 1 00:00:22.532: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(17d), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 14-Jan-04 20:21 by ccai
*Mar 1 00:00:22.532: %SNMP-5-COLDSTART: SNMP agent on host COTTO_MOLINETTO is undergoing a cold start
*Mar 1 00:00:22.580: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
*Mar 1 00:00:22.861: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
*Mar 1 00:00:24.451: %DUAL-5-NBRCHANGE: IP-EIGRP 5: Neighbor 192.168.255.4 (FastEthernet0/1) is up: new adjacency
*Mar 1 00:00:25.321: %DUAL-5-NBRCHANGE: IP-EIGRP 5: Neighbor 192.168.1.221 (FastEthernet0/0) is up: new adjacency
*Mar 1 00:00:25.774: %ISDN-6-LAYER2UP: Layer 2 for Interface BR1/0, TEI 64 changed to up
*Mar 1 02:04:38.875: %DUAL-5-NBRCHANGE: IP-EIGRP 5: Neighbor 192.168.255.4 (FastEthernet0/1) is down: holding time expired
*Mar 1 02:04:51.776: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
*Mar 1 02:04:51.776: %DIALER-6-BIND: Interface BR1/0:1 bound to profile Di0
*Mar 1 02:04:57.782: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 00423920892
*Mar 1 02:05:11.801: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 00423920892 , call lasted 20 seconds
*Mar 1 02:05:11.913: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down
*Mar 1 02:05:11.917: %DIALER-6-UNBIND: Interface BR1/0:1 unbound from profile Di0
*Mar 1 02:05:19.778: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
*Mar 1 02:05:19.778: %DIALER-6-BIND: Interface BR1/0:1 bound to profile Di0
*Mar 1 02:05:25.784: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 00423920892
*Mar 1 02:05:39.803: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 00423920892 , call lasted 20 seconds
*Mar 1 02:05:39.923: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down
*Mar 1 02:05:39.927: %DIALER-6-UNBIND: Interface BR1/0:1 unbound from profile Di0
*Mar 1 02:05:47.784: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
*Mar 1 02:05:47.788: %DIALER-6-BIND: Interface BR1/0:1 bound to profile Di0
*Mar 1 02:05:53.794: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 00423920892
*Mar 1 02:06:07.817: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 00423920892 , call lasted 20 seconds
*Mar 1 02:06:07.921: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down
*Mar 1 02:06:07.925: %DIALER-6-UNBIND: Interface BR1/0:1 unbound from profile Di0
*Mar 1 02:06:15.834: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
*Mar 1 02:06:15.838: %DIALER-6-BIND: Interface BR1/0:1 bound to profile Di0
*Mar 1 02:06:21.840: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 00423920892
*Mar 1 02:06:35.859: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 00423920892 , call lasted 20 seconds
*Mar 1 02:06:35.963: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down
*Mar 1 02:06:35.967: %DIALER-6-UNBIND: Interface BR1/0:1 unbound from profile Di0
*Mar 1 02:06:43.816: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
*Mar 1 02:06:43.820: %DIALER-6-BIND: Interface BR1/0:1 bound to profile Di0
*Mar 1 02:06:49.826: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 00423920892
*Mar 1 02:07:03.845: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 00423920892 , call lasted 20 seconds
*Mar 1 02:07:03.953: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down
*Mar 1 02:07:03.953: %DIALER-6-UNBIND: Interface BR1/0:1 unbound from profile Di0
*Mar 1 02:07:11.842: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
*Mar 1 02:07:11.846: %DIALER-6-BIND: Interface BR1/0:1 bound to profile Di0
*Mar 1 02:07:17.852: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 00423920892
*Mar 1 02:07:31.871: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 00423920892 , call lasted 20 seconds
*Mar 1 02:07:31.983: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down
*Mar 1 02:07:31.983: %DIALER-6-UNBIND: Interface BR1/0:1 unbound from profile Di0
*Mar 1 02:07:41.875: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
*Mar 1 02:07:41.875: %DIALER-6-BIND: Interface BR1/0:1 bound to profile Di0
*Mar 1 02:07:47.881: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 00423920892
*Mar 1 02:07:57.016: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 00423920892 , call lasted 15 seconds
*Mar 1 02:07:57.016: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down
*Mar 1 02:07:57.016: %DIALER-6-UNBIND: Interface BR1/0:1 unbound from profile Di0
*Mar 1 02:08:05.726: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
*Mar 1 02:08:05.730: %DIALER-6-BIND: Interface BR1/0:1 bound to profile Di0
*Mar 1 02:08:11.732: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 00423920892
*Mar 1 02:08:25.755: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 00423920892 , call lasted 20 seconds
*Mar 1 02:08:25.996: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down
*Mar 1 02:08:26.000: %DIALER-6-UNBIND: Interface BR1/0:1 unbound from profile Di0
*Mar 1 02:08:34.702: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
*Mar 1 02:08:34.706: %DIALER-6-BIND: Interface BR1/0:1 bound to profile Di0
*Mar 1 02:08:40.708: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 00423920892
*Mar 1 02:08:54.735: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 00423920892 , call lasted 20 seconds
*Mar 1 02:08:54.843: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down
*Mar 1 02:08:54.843: %DIALER-6-UNBIND: Interface BR1/0:1 unbound from profile Di0
*Mar 1 02:09:03.797: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
*Mar 1 02:09:03.802: %DIALER-6-BIND: Interface BR1/0:1 bound to profile Di0
*Mar 1 02:09:09.803: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 00423920892
*Mar 1 02:09:23.822: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 00423920892 , call lasted 20 seconds
*Mar 1 02:09:23.931: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down
*Mar 1 02:09:23.935: %DIALER-6-UNBIND: Interface BR1/0:1 unbound from profile Di0
*Mar 1 02:09:31.759: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
*Mar 1 02:09:31.763: %DIALER-6-BIND: Interface BR1/0:1 bound to profile Di0
*Mar 1 02:09:37.769: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 00423920892
*Mar 1 02:09:49.000: %DUAL-5-NBRCHANGE: IP-EIGRP 5: Neighbor 192.168.255.4 (FastEthernet0/1) is up: new adjacency
*Mar 1 02:09:51.788: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 00423920892 , call lasted 20 seconds
*Mar 1 02:09:51.900: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down
*Mar 1 02:09:51.904: %DIALER-6-UNBIND: Interface BR1/0:1 unbound from profile Di0
*Mar 1 02:09:53.555: %LINK-3-UPDOWN: Interface BRI1/0:2, changed state to up
*Mar 1 02:09:54.096: %DIALER-6-BIND: Interface BR1/0:2 bound to profile Di0
*Mar 1 02:09:54.096: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to up
*Mar 1 02:09:54.100: %DIALER-6-BIND: Interface BR1/0:1 bound to profile Di0
*Mar 1 02:09:54.104: %ISDN-6-CONNECT: Interface BRI1/0:2 is now connected to 00423920892 COTTO_OLIVI
*Mar 1 02:09:55.114: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/0:2, changed state to up
*Mar 1 02:09:55.158: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/0:1, changed state to up
*Mar 1 02:10:00.106: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to 00423920892 COTTO_OLIVI
*Mar 1 02:11:54.349: %ISDN-6-DISCONNECT: Interface BRI1/0:2 disconnected from 00423920892 COTTO_OLIVI, call lasted 120 seconds
*Mar 1 02:11:54.349: %LINK-3-UPDOWN: Interface BRI1/0:2, changed state to down
*Mar 1 02:11:54.349: %DIALER-6-UNBIND: Interface BR1/0:2 unbound from profile Di0
*Mar 1 02:11:54.505: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected from 00423920892 COTTO_OLIVI, call lasted 120 seconds
*Mar 1 02:11:54.589: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to down
*Mar 1 02:11:54.593: %DIALER-6-UNBIND: Interface BR1/0:1 unbound from profile Di0
*Mar 1 02:11:55.351: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/0:2, changed state to down
*Mar 1 02:11:55.591: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/0:1, changed state to down
ho letto da qualche parte che si riavvia per non danneggiare la cpu.. qualcosa del genere.. questo Watchdog..
potete dirmi di piu?