Roter cisco 1760+ WIC-1ADSL configurazione ATM1/0

[vulbenn]

chiedo la vostra gentile collaborazione
premetto che non sono un esperto
ho il router in oggetto settato con un adsl a bassisma velocità telcom con un ip statico e 8 ip assegnati
cambiando la line sempre con telecom abbiamo fatto installare una 7 mega sempre con un ip statico e 8 ip assegnati logicamente diversi ho fatto una semplice operazione di sostituzione IP ma non ha funzionato
è possibile che la scheda non supporti la linea a 7 mega???
vi posto la configurazione

ROUTER #wr t
Building configuration...

Current configuration : 14935 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ROUTER
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$DHuw$ETK1LtXHUb.RNaRgSPluH1
!
no aaa new-model
!
resource policy
!
clock save interval 8
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
no ip source-route
ip cef
!
!
no ip dhcp use vrf connected
!
!
no ftp-server write-enable
!
username ADMIN password 7 07592218170F1D5443
!
!
class-map match-any ARP
match protocol arp
class-map match-any Slammer-Worm
match access-group name ACL-Slammer-Worm
match packet length min 404 max 404
class-map match-any Http-Hacks-Worm
match protocol http url "*.ida*"
match protocol http url "*cmd.exe*"
match protocol http url "*root.exe*"
match protocol http url "*readme.eml*"
match protocol http url "*.rtf.exe*"
match protocol http url "*.doc.exe*"
match protocol http url "*.jpg.exe*"
match protocol http url "*.mp3.exe*"
match protocol http url "*.mp3.pif*"
match protocol http url "*.txt.exe*"
match protocol http url "*.mpg.exe*"
match protocol http url "*3D Studio Max 6 3dsmax.exe*"
match protocol http url "*ACDSee 10.exe*"
match protocol http url "*Adobe Photoshop 10 crack.exe*"
match protocol http url "*Adobe Photoshop 10 full.exe*"
match protocol http url "*Adobe Premiere 10.exe*"
match protocol http url "*Ahead Nero 8.exe*"
match protocol http url "*Best Matrix Screensaver new.scr*"
match protocol http url "*Clone DVD 6.exe*"
match protocol http url "*Cloning.doc.exe*"
match protocol http url "*Cracks & Warez Archiv.exe*"
match protocol http url "*Dark Angels new.pif*"
match protocol http url "*DivX 8.0 final.exe*"
match protocol http url "*Doom 3 release 2.exe*"
class-map match-any Dos-Attack
match access-group name ACL-RateLimitSyn
!
!
policy-map Drop-HacksWormDoS-Attack
class Http-Hacks-Worm
set ip dscp 1
class Slammer-Worm
police 1000000 31250 31250 conform-action transmit exceed-action drop viola
te-action drop
class Dos-Attack
police 4000000 16000 16000 conform-action transmit exceed-action drop
policy-map RateLimitARP
class ARP
police 8000 1500 1500 conform-action transmit exceed-action drop violate-ac
tion drop
!
!
!
interface FastEthernet0/0
no ip address
shutdown
speed 100
!
interface FastEthernet0/1
description verso SW-Mgt-CW-1;trasporta la VL-Mgt-RTSW-1 (VID=004)
switchport access vlan 4
no ip address
duplex full
speed 100
!
interface FastEthernet0/2
description verso FW-AC-CW-1;trasporta la VL-CW-FWAC-1 (VID=002)
switchport access vlan 2
no ip address
!
interface FastEthernet0/3
description description trunk 802.1q; VLAN Nativa VL-CW-FWAC-1 (VID=002)
switchport trunk native vlan 2
switchport mode trunk
no ip address
shutdown
duplex full
speed 100
!
interface FastEthernet0/4
description verso pc test
switchport access vlan 5
no ip address
duplex full
speed 100
!
interface ATM1/0
ip address XXX.XXX.XXX.XXX 255.255.255.252
ip access-group ACL-ADMIN-In in
ip access-group ACL-ADMIN-Out out
ip verify unicast reverse-path
rate-limit input access-group 101 512000 96000 192000 conform-action set-prec-t
ransmit 5 exceed-action set-prec-transmit 0
rate-limit input access-group 102 128000 24000 48000 conform-action set-prec-tr
ansmit 5 exceed-action set-prec-transmit 0
rate-limit input access-group 103 128000 24000 48000 conform-action set-prec-tr
ansmit 5 exceed-action set-prec-transmit 0
rate-limit input access-group 104 320000 60000 120000 conform-action set-prec-t
ransmit 5 exceed-action set-prec-transmit 0
rate-limit input access-group 105 128000 24000 48000 conform-action set-prec-tr
ansmit 5 exceed-action set-prec-transmit 0
rate-limit input access-group 106 256000 48000 96000 conform-action set-prec-tr
ansmit 5 exceed-action set-prec-transmit 0
rate-limit input access-group 107 512000 96000 192000 conform-action set-prec-t
ransmit 5 exceed-action set-prec-transmit 0
no ip mroute-cache
no atm ilmi-keepalive
dsl operating-mode auto
service-policy output RateLimitARP
pvc 8/35
encapsulation aal5snap
!
!
ROUTER #sh int atm1/0
ATM1/0 is up, line protocol is up
Hardware is DSLSAR (with Alcatel ADSL Module)
Internet address is 81.123.105.162/30
MTU 4470 bytes, sub MTU 4470, BW 320 Kbit, DLY 1600 usec,
reliability 255/255, txload 175/255, rxload 28/255
Encapsulation ATM, loopback not set
Encapsulation(s): AAL5 AAL2, PVC mode
23 maximum active VCs, 256 VCs per VP, 1 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
Last input 00:00:22, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Per VC Queueing
5 minute input rate 36000 bits/sec, 28 packets/sec
5 minute output rate 220000 bits/sec, 36 packets/sec
965173 packets input, 906864889 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 2 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
863934 packets output, 344107986 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 output buffer failures, 0 output buffers swapped out



ROUTER #sh ver
Cisco IOS Software, C1700 Software (C1700-IPBASE-M), Version 12.3(14)T1, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Thu 31-Mar-05 13:40 by yiyan

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

ROUTER uptime is 1 day, 1 hour, 10 minutes
System returned to ROM by power-on
System image file is "flash:c1700-ipbase-mz.123-14.T1.bin"

Cisco 1760 (MPC860P) processor (revision 0x500) with 58115K/7421K bytes of memor
y.
Processor board ID FOC0908062W (2297267873), with hardware revision 0000
MPC860P processor: part number 5, mask 2
1 Ethernet interface
5 FastEthernet interfaces
1 ATM interface
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2

[paolomat75]

Ciao,
non è un problema di WIC-1ADSL. I pacchetti sulla ATM girano. Spiega meglio il tuo problema.

[zot]

Posta tutta la conf..