CiscoForums.it

Un saluto a tutti e soprattutto un ringraziamento.
Senza questo forum non sarei mai riuscito a fare funzionare il voip sip sul mio 827.
Ma veniamo al problema:

ho fatto l'aggiornamento dell'ios e dopo il boot è successo sto casino!

Apr 7 23:20:55 192.168.10.1 0: *Mar 1 00:00:09.471: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
Apr 7 23:21:10 192.168.10.1 1: *Mar 1 00:00:37.451: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
Apr 7 23:21:10 192.168.10.1 2: *Mar 1 00:00:38.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to up
Apr 7 23:21:10 192.168.10.1 3: *Mar 1 00:00:38.607: %LINK-3-UPDOWN: Interface ATM0, changed state to down
Apr 7 23:21:10 192.168.10.1 4: *Mar 1 00:00:39.655: %SYS-6-CLOCKUPDATE: System clock has been updated from 00:00:39 UTC Fri Mar 1 2002 to 01:00:39 CET Fr
i Mar 1 2002, configured from console by console.
Apr 7 23:21:10 192.168.10.1 5: *Mar 1 00:00:39.679: %SYS-6-CLOCKUPDATE: System clock has been updated from 01:00:39 CET Fri Mar 1 2002 to 01:00:39 CET Fr
i Mar 1 2002, configured from console by console.
Apr 7 23:21:10 192.168.10.1 6: *Mar 1 00:00:39.723: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed state to down
Apr 7 23:21:10 192.168.10.1 7: *Mar 1 00:00:41.907: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
Apr 7 23:21:10 192.168.10.1 8: *Mar 1 00:00:42.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, changed state to up
Apr 7 23:21:10 192.168.10.1 9: *Mar 1 00:00:49.219: %SYS-5-CONFIG_I: Configured from memory by console
Apr 7 23:21:10 192.168.10.1 10: *Apr 7 21:14:17.003: %FW-6-INIT: Firewall inspection startup completed; beginning operation.
Apr 7 23:21:10 192.168.10.1 11: *Apr 7 21:14:17.891: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
Apr 7 23:21:10 192.168.10.1 12: *Apr 7 21:14:17.903: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: dropping <id# 59475> from <cli 192.168.10.20>.
Apr 7 23:21:10 192.168.10.1 13: *Apr 7 21:14:19.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to up
Apr 7 23:21:10 192.168.10.1 14: *Apr 7 21:14:21.751: %SYS-5-RESTART: System restarted --
Apr 7 23:21:10 192.168.10.1 15: Cisco IOS Software, C820 Software (C820-K9OSV6Y6-M), Version 12.4(5a), RELEASE SOFTWARE (fc3)
Apr 7 23:21:10 192.168.10.1 16: Technical Support: http://www.cisco.com/techsupport
Apr 7 23:21:10 192.168.10.1 17: Copyright (c) 1986-2006 by Cisco Systems, Inc.
Apr 7 23:21:10 192.168.10.1 18: Compiled Sat 14-Jan-06 05:45 by alnguyen
Apr 7 23:21:10 192.168.10.1 19: *Apr 7 21:14:21.755: %SNMP-5-COLDSTART: SNMP agent on host c827-4v is undergoing a cold start
Apr 7 23:21:10 192.168.10.1 20: *Apr 7 21:14:22.803: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: dropping <id# 1515> from <cli 192.168.10.20>.
Apr 7 23:21:10 192.168.10.1 21: *Apr 7 21:14:27.575: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: dropping <id# 1515> from <cli 192.168.10.20>.
Apr 7 23:21:10 192.168.10.1 22: *Apr 7 21:14:27.595: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 192.168.10.20 started - CLI initiated
Apr 7 23:21:10 192.168.10.1 23: *Apr 7 21:14:27.639: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: dropping <id# 3414> from <cli 192.168.10.20>.
Apr 7 23:21:10 192.168.10.1 24: *Apr 7 21:14:32.555: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: dropping <id# 31637> from <cli 192.168.10.20>.
Apr 7 23:21:10 192.168.10.1 25: *Apr 7 21:14:32.607: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: dropping <id# 3414> from <cli 192.168.10.20>.
Apr 7 23:21:10 192.168.10.1 26: *Apr 7 21:14:32.611: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: dropping <id# 18035> from <cli 192.168.10.20>.
Apr 7 23:21:10 192.168.10.1 27: *Apr 7 21:14:37.555: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: dropping <id# 31637> from <cli 192.168.10.20>.
Apr 7 23:21:10 192.168.10.1 28: *Apr 7 21:14:37.611: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: dropping <id# 18035> from <cli 192.168.10.20>.
Apr 7 23:21:11 192.168.10.1 29: *Apr 7 21:14:42.559: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: dropping <id# 38205> from <cli 192.168.10.20>.
Apr 7 23:21:12 192.168.10.1 30: *Apr 7 21:14:42.743: %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed from 0x801EEE60, alignment 0
Apr 7 23:21:12 192.168.10.1 31: Pool: Processor Free: 134748 Cause: Memory fragmentation
Apr 7 23:21:12 192.168.10.1 32: Alternate Pool: None Free: 0 Cause: No Alternate pool
Apr 7 23:21:12 192.168.10.1 33:
Apr 7 23:21:12 192.168.10.1 34: -Process= "Crypto WUI", ipl= 0, pid= 94
Apr 7 23:21:12 192.168.10.1 35: -Traceback= 0x8008E000 0x801CFD9C 0x801D85B4 0x801EEE64 0x800460D8 0x80045F40 0x8004D49C 0x80042B14 0x812EB158 0x812EF428
0x812E9EB8 0x801C086C 0x801C3C28
Apr 7 23:21:13 192.168.10.1 36: *Apr 7 21:14:45.043: %DIALER-6-BIND: Interface Vi2 bound to profile Di1
Apr 7 23:21:13 192.168.10.1 37: *Apr 7 21:14:45.051: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up
Apr 7 23:21:13 192.168.10.1 38: *Apr 7 21:14:45.051: %SYS-2-NULLCHUNK: Memory requested from Null Chunk
Apr 7 23:21:13 192.168.10.1 39: -Process= "Net Background", ipl= 0, pid= 22
Apr 7 23:21:13 192.168.10.1 40: -Traceback= 0x8008E000 0x801EFE50 0x813DB584 0x80D28200 0x80D05ED8 0x80D06004 0x801492F8 0x801497D4 0x80138DAC 0x801C086C
0x801C3C28
Apr 7 23:21:14 192.168.10.1 41: *Apr 7 21:14:45.067: %AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient proces
sor memory
Apr 7 23:21:14 192.168.10.1 42: *Apr 7 21:14:45.499: %LINK-3-UPDOWN: Interface ATM0, changed state to up
Apr 7 23:21:15 192.168.10.1 43: *Apr 7 21:14:46.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed state to up
Apr 7 23:21:16 192.168.10.1 44: *Apr 7 21:14:47.563: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: dropping <id# 38205> from <cli 192.168.10.20>.
Apr 7 23:21:21 192.168.10.1 45: *Apr 7 21:14:52.567: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: dropping <id# 24903> from <cli 192.168.10.20>.
Apr 7 23:21:24 192.168.10.1 46: *Apr 7 21:14:55.607: %SYS-2-NULLCHUNK: Memory requested from Null Chunk

il router non ne ha voluto più sapere di andare.
Adesso ho risolto reinstallando dal ROM Monitor il vecchio ios, ma volevo capire se ho sbagliato qualcosa.
L'unico passaggio che ho saltato di tutta la
http://www.cisco.com/en/US/products/hw/ ... 4b23.shtml
procedura è
config-reg 0x2102
Può essere stato quello?
Sembra che non ci sia abbastanza memoria per fare girare ios, ma il mio 827 ha il massimo della ram e della flash, l'unica cosa migliorabile è la webflash, ma non penso centri molto.
Garzie

Alberto

Che IOS stai mettendo e QUANTA Flash e RAM hai?!

L'Ios che ho provato e non va è questo qui

(C820-K9OSV6Y6-M), Version 12.4(5a), RELEASE SOFTWARE (fc3)

lo show hardware attuale (con l'ios funzionante) è il seguente

Cisco IOS Software, C820 Software (C820-OV6Y6-M), Version 12.4(3), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 22-Jul-05 13:26 by hqluong

ROM: System Bootstrap, Version 12.2(1r)XE2, RELEASE SOFTWARE (fc1)

c827-4v uptime is 1 day, 17 hours, 19 minutes
System returned to ROM by reload at 01:01:01 CEST Sat Apr 8 2006
System image file is "flash:C820-Ov6y6-Mz-124-3.bin"

Cisco C827-4V (MPC855T) processor (revision 0x1001) with 48128K/1024K bytes of memory.
Processor board ID JAE08050F8J (446381197), with hardware revision 0000
CPU rev number 5
4 POTS Ports
1 Ethernet interface
1 ATM interface
128K bytes of NVRAM.
12288K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2102

Ciao e grazie.

Alberto

I requisiti sono corretti...evidentemente hai caricato il router con una configurazione che sfrutta funzioni che saturano la RAM, ottimizza il tutto...ricorda che è un 827...

La configurazione è questa, io non sono espertissimo di ios,secondo te è troppo complessa

!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname c827-4v
!
boot-start-marker
boot-end-marker
!
logging buffered informational
logging rate-limit 1000
logging console errors
enable secret 5 $segreto
!
no aaa new-model
!
resource policy
!
clock timezone CET 1
clock summer-time CEST recurring last Sun Mar 2:00 last Sun Oct 3:00
ip subnet-zero
ip dhcp excluded-address 192.168.100.30
ip dhcp excluded-address 192.168.100.20
!
!
ip name-server 235.194.10.1
ip name-server 235.194.10.2
ip inspect name myfw cuseeme timeout 3600
ip inspect name myfw ftp timeout 3600
ip inspect name myfw rcmd timeout 3600
ip inspect name myfw realaudio timeout 3600
ip inspect name myfw smtp timeout 3600
ip inspect name myfw tftp timeout 30
ip inspect name myfw udp timeout 15
ip inspect name myfw tcp timeout 3600
ip inspect name myfw sip timeout 3600
!
!
!
!
voice class codec 1
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
!
!
!
!
!
!
!
!
!
username utonto password 0 password
!
!
!
!
interface Loopback0
no ip address
!
interface Ethernet0
ip address 192.168.100.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
hold-queue 100 out
!
interface ATM0
no ip address
atm vc-per-vp 64
no atm ilmi-keepalive
dsl operating-mode auto
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface Dialer1
ip address negotiated
ip access-group 111 in
ip mtu 1492
ip nat outside
ip inspect myfw out
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer remote-name redback
dialer-group 1
ppp authentication pap chap callin
ppp chap hostname [email protected]
ppp chap password 0 password
ppp pap sent-username [email protected] password 0 passwordadsl
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
ip dns server
!
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 192.168.100.30 22 interface Dialer1 6358
ip nat inside source static udp 192.168.100.30 80 interface Dialer1 80
!
logging facility local2
logging source-interface Loopback0
logging 192.168.100.20
access-list 23 permit 192.168.100.0 0.0.0.255
access-list 102 permit ip 192.168.100.0 0.0.0.255 any
access-list 111 permit udp host 195.62.225.244 eq 5060 any
access-list 111 permit udp host 193.204.114.232 eq ntp any eq ntp
access-list 111 permit tcp any any eq 6358
access-list 111 permit udp any any eq 80
access-list 111 permit icmp any any administratively-prohibited
access-list 111 permit icmp any any echo-reply
access-list 111 permit icmp any any packet-too-big
access-list 111 permit icmp any any time-exceeded
access-list 111 permit icmp any any traceroute
access-list 111 permit icmp any any unreachable
access-list 111 permit udp any eq bootps any eq bootpc
access-list 111 permit udp any eq bootps any eq bootps
access-list 111 permit udp any eq domain any
access-list 111 permit esp any any
access-list 111 permit gre any any
access-list 111 deny ip any any log
dialer-list 1 protocol ip permit
!
control-plane
!
!
voice-port 1
ring cadence pattern01
echo-cancel coverage 32
no vad
cptone IT
timeouts interdigit 5
bearer-cap Speech
caller-id enable
!
voice-port 2
ring cadence pattern01
cptone IT
!
voice-port 3
ring cadence pattern01
cptone IT
!
voice-port 4
ring cadence pattern01
cptone IT
!
dial-peer voice 1 voip
destination-pattern .T
voice-class codec 1
session protocol sipv2
session target sip-server
session transport udp
dtmf-relay sip-notify
!
dial-peer voice 2 pots
destination-pattern 000000000000
port 1
!
sip-ua
authentication username 00000000000 password 0000000000000000000000000
retry invite 4
retry response 3
retry bye 2
retry cancel 2
registrar dns:voip.eutelia.it:5060 expires 3600
sip-server dns:voip.eutelia.it:5060
!
!
line con 0
exec-timeout 0 0
stopbits 1
line vty 0 4
access-class 23 in
exec-timeout 120 0
login local
length 0
!
scheduler max-task-time 5000
sntp server 193.204.114.232
sntp broadcast client
end

Grazie.

Alberto

Prova a togliere tutti gli "ip inspect name myfw" e poi prova di nuovo a caricare l' IOS.Ma questo aggiornamento ti è proprio necessario?!

Volevo provare a fare qualche vpn ... e la versione che ho adesso non le supporta.

Alberto.

Volendo usare la tua configurazione vorrei sapere dopo la riga "sip-ua" la username e password a cosa si riferiscono?
Mi postate su [email protected] l'IOS 12.4?

Franci

Sono il numero di telefono che mi è stato assegnato e la password per autenticarsi sul server SIP di Eutelia.
Io li ho ovviamente azzerati.
Te li devono dare loro o, nel caso in cui tu non abbia un abbonamento con Eutelia, il tuo provider telefonico.
Ciao.

Alberto