CiscoForums.it

Inviato: **gio 02 ago , 2012 5:41 pm**

Ciao a tutti, questo è il mio primo post, abbiate pazienza e vi chiedo scusa in anticipo per le cavolate che dirò...

Allora vengo al dunque, ho appena comprato un 887 ma non riesco a configurare l'adsl con Infostrada... in cosa sbaglio.. HELPPP !!!
Allego la configurazione:

Codice: Seleziona tutto

Building configuration...

Current configuration : 2335 bytes
!
! Last configuration change at 18:31:24 UTC Thu Aug 2 2012 by ccpuser
! NVRAM config last updated at 18:31:59 UTC Thu Aug 2 2012 by ccpuser
! NVRAM config last updated at 18:31:59 UTC Thu Aug 2 2012 by ccpuser
version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no logging buffered
!
no aaa new-model
!
memory-size iomem 10
crypto pki token default removal timeout 0
!
!
ip source-route
!
!
!
ip dhcp excluded-address 192.168.1.1 192.168.1.19
!
ip dhcp pool 
 import all
 network 192.168.1.0 255.255.255.0
 dns-server 8.8.8.8 8.8.4.4 
 default-router 192.168.1.1 
 lease 6
!
!
ip cef
ip name-server 8.8.8.8
ip name-server 8.8.4.4
no ipv6 cef
!
!
multilink bundle-name authenticated
license udi pid CISCO887VA-SEC-K9 sn FCZ1602907A
license boot module c880-data level advipservices
!
!
username ccpuser privilege 15 secret 5 $1$DK2Q$i9rmX.2I32ML1ZrR/XuRq0
!
!
!
!
controller VDSL 0
!
! 
!
interface Ethernet0
 no ip address
 shutdown
!
interface ATM0
 no ip address
 no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
 pvc 8/35 
  oam-pvc manage
  pppoe-client dial-pool-number 1
 !
!
interface FastEthernet0
 no ip address
!
interface FastEthernet1
 no ip address
!
interface FastEthernet2
 no ip address
!
interface FastEthernet3
 no ip address
!
interface Vlan1
 ip address 192.168.1.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly in
 ip tcp adjust-mss 1412
!
interface Dialer0
 ip address dhcp
 ip mtu 1452
 ip nat outside
 ip virtual-reassembly in
 encapsulation ppp
 dialer pool 1
 dialer-group 1
 ppp authentication chap pap callin
 ppp chap hostname XXx
 ppp chap password 0 xxxxx
 ppp pap sent-username xxx password 0 xxxx
 ppp multilink
!
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
ip nat inside source list 1 interface Dialer0 overload
!
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 192.168.1.0 0.0.0.255
dialer-list 1 protocol ip permit
!
!
!
!
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
 login local
 transport input telnet
!
end

Inviato: **ven 03 ago , 2012 7:33 am**

Da vedere così sembra tutto corretto, che problema ti dà? Cosa non riesci a fare esattamente?

Prova anche a postare i log e gli stati delle interfacce.

Rizio

Inviato: **ven 03 ago , 2012 8:12 am**

quando eseguo il test connessione non riesce a prendere un indirizzo IP, gli altri test passano...
la cosa cambia quando cambio la configurazione da IP Fisso a Vlan1, allora prende l'indirizzo ma va in errore agli STEP successivi (ma credo che in realtà prenda l'indirizzo della Vlan1 e quindi un indirizzo sbagliato)
cmq appena arrivo a casa invio il report dell'errore...
grazie tante, ci sto uscendo matto ...

Inviato: **ven 03 ago , 2012 8:16 am**

Alex13 ha scritto:quando eseguo il test connessione non riesce a prendere un indirizzo IP, gli altri test passano...

Ma di che test stai parlando? Da dove lo esegui?

Alex13 ha scritto:la cosa cambia quando cambio la configurazione da IP Fisso a Vlan1, allora prende l'indirizzo ma va in errore agli STEP successivi (ma credo che in realtà prenda l'indirizzo della Vlan1 e quindi un indirizzo sbagliato)

Questa proprio non l'ho capita....ma stai usando l'interfaccia web?
Se infostrada ti ha dato un IP statico allora lo puoi mettere altrimenti che ip metti?

Alex13 ha scritto:cmq appena arrivo a casa invio il report dell'errore...

Si perchè così non ci sto capendo nulla io, non ho mai usato l'interfaccia web perciò forse è per quello che non ti riesco a seguire.

Rizio

Inviato: **ven 03 ago , 2012 10:06 am**

si Rizio utilizo la pagina grafica... devo sembre abituarmi ai comandi

e tramite quella è possibile eseguire un test della connessione adsl... che appunto restituisce l'errore di indirizzamento IP... infatti il led dell'adsl rimane spento e si accende ogni 4 sec circa... cmq ti mando il file di errore...

Inviato: **ven 03 ago , 2012 3:30 pm**

Allego il dettaglio dell'errore...

Codice: Seleziona tutto

<html> <head> <title> 
WAN Troubleshooting Report
 </title></head><body>
<p align=center><b><font color=blue>
WAN troubleshooting report details
</font></b></p><br><br>
<B><U><font color=blue>
Router Details
</font></U></B>
<BR><BR>
<table border='1' cellpadding='0' cellspacing='0' style='border-collapse: collapse' bordercolor='#111111' width='100%' id='AutoNumber1'><tr><td width='40%'><font color=blue><b>Attribute</b></font></td> <td width='30%'><font color=blue><b>Value</b></font></td></tr>
<tr> <td width='40%'>
Router Model
</td> <td width='30%'>
887VA
</td> </tr>
<tr> <td width='40%'>
Image Name
</td> <td width='30%'>
c880data-universalk9-mz.151-4.M3.bin
</td> </tr>
<tr> <td width='40%'>
IOS Version
</td> <td width='30%'>
15.1(4)M3
</td> </tr>
<tr> <td width='40%'>
Hostname
</td> <td width='30%'>
Router
</td> </tr>
</tr> </table> </body> </html> 
<BR><BR>
<B><U><font color=blue>
Interface Details
</font></U></B>
<BR><BR>
<B><U>
<table border='1' cellpadding='0' cellspacing='0' style='border-collapse: collapse' bordercolor='#111111' width='100%' id='AutoNumber1'><tr><td width='40%'><font color=blue><b>Attribute</b></font></td> <td width='30%'><font color=blue><b>Value</b></font></td></tr>
</U></B>
<tr> <td width='40%'>
Interface
</td> <td width='30%'>
ATM0.1
</td> </tr>
<tr> <td width='40%'>
IP address
</td> <td width='30%'>
192.168.1.1(unnumbered Vlan1)
</td> </tr>
<tr> <td width='40%'>
Description
</td> <td width='30%'>

</td> </tr>
</tr> </table> </body> </html>
<BR><BR>
<B><U><font color=blue>
Test Activity Summary
</font></U></B>
<BR><BR>
<table border='1' cellpadding='0' cellspacing='0' style='border-collapse: collapse' bordercolor='#111111' width='100%' id='AutoNumber1'><tr><td width='40%'><font color=blue><b>Activity</b></font></td> <td width='30%'><font color=blue><b>Status</b></font></td> </font></tr>
<tr> <td width='40%'>
Checking interface status...
</td> <td width='30%'>
Up
</td> </tr>
<tr> <td width='40%'>
Checking for DNS settings...
</td> <td width='30%'>
Successful
</td> </tr>
<tr> <td width='40%'>
Checking interface IP address..
</td> <td width='30%'>
Successful
</td> </tr>
<tr> <td width='40%'>
Checking exit interface...
</td> <td width='30%'>
Failed
</td> </tr>
</tr> </table> </body> </html>
<BR>
<BR>
<B><U><font color=blue>
Test Activity Details
</font></U></B>
<BR><BR>
<table border='1' cellpadding='0' cellspacing='0' style='border-collapse: collapse' bordercolor='#111111' width='100%' id='AutoNumber1'><tr><td width='40%'><font color=blue><b>Activity</b></font></td> <td width='30%'><font color=blue><b>Status</b></font></td> </font></tr>
<tr> <td width='40%'>
Checking interface status...
</td> <td width='30%'>
Up
</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Interface physical status :Up
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Line protocol status :Up
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
Checking for DNS settings...
</td> <td width='30%'>
Successful
</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     DNS lookup set :Yes
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Statically configured DNS servers : 8.8.8.8 8.8.4.4
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Dynamically imported DNS servers :None
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
Checking interface IP address..
</td> <td width='30%'>
Successful
</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Interface IP address :192.168.1.1
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Interface IP address Type :Unnumbered
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
Checking exit interface...
</td> <td width='30%'>
Failed
</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Exit interface found :None
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Exit interface found :None
</td> <td width='30%'>

</td> </tr>
</tr> </table> </body> </html>
<BR><BR>
<B><U><font color=blue>
Troubleshooting Results
</font><U><B>
<table border='1' cellpadding='0' cellspacing='0' style='border-collapse: collapse' bordercolor='#111111' width='100%' id='AutoNumber1'><tr><td width='40%'><font color=blue><b>Failure Reason(s)</b></font></td> <td width='30%'><font color=blue><b>Recommended Action(s)</b></font></td></tr>
<BR>
<tr> <td width='40%'>
To test connectivity, Cisco CP tries to ping the configured DNS servers. However, there is no configured route to any of the DNS servers through the selected interface.
</td> <td width='30%'>
Select 'User-specified' option or add a 'host specific/network specific/default' route through this interface and retest connection.
</td> </tr>

Inviato: **sab 04 ago , 2012 9:32 am**

nessun suggerimento

Inviato: **sab 04 ago , 2012 11:02 am**

Alex13 ha scritto:nessun suggerimento

Ciao.
Aggiungi

Codice: Seleziona tutto

ip route 0.0.0.0 0.0.0.0 d0

Paolo

Inviato: **sab 04 ago , 2012 5:52 pm**

Grazie Paolo, ho provato qualcosa è migliorato ma ancora non si collega... mi dice che non riesce a pingare l'host di destinazione.
Ho fatto anche una modifica ho impostato la ATM.01 come inside e la VLAN1 come outside nella configurazione del NAT.
invio il report dell'errore...

Codice: Seleziona tutto

<html> <head> <title> 
WAN Troubleshooting Report
 </title></head><body>
<p align=center><b><font color=blue>
WAN troubleshooting report details
</font></b></p><br><br>
<B><U><font color=blue>
Router Details
</font></U></B>
<BR><BR>
<table border='1' cellpadding='0' cellspacing='0' style='border-collapse: collapse' bordercolor='#111111' width='100%' id='AutoNumber1'><tr><td width='40%'><font color=blue><b>Attribute</b></font></td> <td width='30%'><font color=blue><b>Value</b></font></td></tr>
<tr> <td width='40%'>
Router Model
</td> <td width='30%'>
887VA
</td> </tr>
<tr> <td width='40%'>
Image Name
</td> <td width='30%'>
c880data-universalk9-mz.151-4.M3.bin
</td> </tr>
<tr> <td width='40%'>
IOS Version
</td> <td width='30%'>
15.1(4)M3
</td> </tr>
<tr> <td width='40%'>
Hostname
</td> <td width='30%'>
Router
</td> </tr>
</tr> </table> </body> </html> 
<BR><BR>
<B><U><font color=blue>
Interface Details
</font></U></B>
<BR><BR>
<B><U>
<table border='1' cellpadding='0' cellspacing='0' style='border-collapse: collapse' bordercolor='#111111' width='100%' id='AutoNumber1'><tr><td width='40%'><font color=blue><b>Attribute</b></font></td> <td width='30%'><font color=blue><b>Value</b></font></td></tr>
</U></B>
<tr> <td width='40%'>
Interface
</td> <td width='30%'>
ATM0.1
</td> </tr>
<tr> <td width='40%'>
IP address
</td> <td width='30%'>
192.168.1.1(unnumbered Vlan1)
</td> </tr>
<tr> <td width='40%'>
Description
</td> <td width='30%'>

</td> </tr>
</tr> </table> </body> </html>
<BR><BR>
<B><U><font color=blue>
Test Activity Summary
</font></U></B>
<BR><BR>
<table border='1' cellpadding='0' cellspacing='0' style='border-collapse: collapse' bordercolor='#111111' width='100%' id='AutoNumber1'><tr><td width='40%'><font color=blue><b>Activity</b></font></td> <td width='30%'><font color=blue><b>Status</b></font></td> </font></tr>
<tr> <td width='40%'>
Checking interface status...
</td> <td width='30%'>
Up
</td> </tr>
<tr> <td width='40%'>
Checking for DNS settings...
</td> <td width='30%'>
Successful
</td> </tr>
<tr> <td width='40%'>
Checking interface IP address..
</td> <td width='30%'>
Successful
</td> </tr>
<tr> <td width='40%'>
Checking exit interface...
</td> <td width='30%'>
Successful
</td> </tr>
<tr> <td width='40%'>
Pinging to destination host...
</td> <td width='30%'>
Failed
</td> </tr>
<tr> <td width='40%'>
Checking ATM PVC status...
</td> <td width='30%'>
Up
</td> </tr>
<tr> <td width='40%'>
Checking PPPoE tunnel...
</td> <td width='30%'>
Up
</td> </tr>
</tr> </table> </body> </html>
<BR>
<BR>
<B><U><font color=blue>
Test Activity Details
</font></U></B>
<BR><BR>
<table border='1' cellpadding='0' cellspacing='0' style='border-collapse: collapse' bordercolor='#111111' width='100%' id='AutoNumber1'><tr><td width='40%'><font color=blue><b>Activity</b></font></td> <td width='30%'><font color=blue><b>Status</b></font></td> </font></tr>
<tr> <td width='40%'>
Checking interface status...
</td> <td width='30%'>
Up
</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Interface physical status :Up
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Line protocol status :Up
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
Checking for DNS settings...
</td> <td width='30%'>
Successful
</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     DNS lookup set :Yes
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Statically configured DNS servers : 8.8.8.8 8.8.4.4
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Dynamically imported DNS servers :None
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
Checking interface IP address..
</td> <td width='30%'>
Successful
</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Interface IP address :192.168.1.1
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Interface IP address Type :Unnumbered
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
Checking exit interface...
</td> <td width='30%'>
Successful
</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Exit interface found :Dialer0
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Exit interface found :Dialer0
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
Pinging to destination host...
</td> <td width='30%'>
Failed
</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Destination pinged to :8.8.8.8
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Size of the ping packet (in bytes) :100
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Timeout interval :2
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Number of ping packets sent to the destination address :5
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Ping reply validated :No
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Fragmentation allowed on ping packet :No
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Destination pinged to :8.8.4.4
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Size of the ping packet (in bytes) :100
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Timeout interval :2
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Number of ping packets sent to the destination address :5
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Ping reply validated :No
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Fragmentation allowed on ping packet :No
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
Checking ATM PVC status...
</td> <td width='30%'>
Up
</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     VPI :8
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     VCI :35
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Sub interface type :point-to-point
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
Checking PPPoE tunnel...
</td> <td width='30%'>
Up
</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Session ID :5374
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Dialer Interface :Di0
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Port :ATM0.1
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Virtual Access Identifier :Vi1
</td> <td width='30%'>

</td> </tr>
<tr> <td width='40%'>
&nbsp&nbsp&nbsp     Virtual Access Status :UP
</td> <td width='30%'>

</td> </tr>
</tr> </table> </body> </html>
<BR><BR>
<B><U><font color=blue>
Troubleshooting Results
</font><U><B>
<table border='1' cellpadding='0' cellspacing='0' style='border-collapse: collapse' bordercolor='#111111' width='100%' id='AutoNumber1'><tr><td width='40%'><font color=blue><b>Failure Reason(s)</b></font></td> <td width='30%'><font color=blue><b>Recommended Action(s)</b></font></td></tr>
<BR>
<tr> <td width='40%'>
Ping to the destination host(s) failed. The possible reason may be one of the following,

1. The detected DNS servers or the IP address or hostname specified are unreachable or not
 responding.

2. In case of DSL interfaces, this may be due to mismatch of encapsulation at the remote end.
</td> <td width='30%'>
1. Contact your WAN administrator or ISP and check the DNS server configuration, or retry with a different IP address / hostname.

2. Contact your WAN administrator or ISP and verify the encapsulation.
</td> </tr>

grazie per l'aiuto, aspetto altri suggerimenti ...

Inviato: **dom 05 ago , 2012 11:08 am**

ecco la parte rilevante della configurazione che a me va senza problemi.

!
interface ATM0
description physical ADSL WAN port
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
hold-queue 224 in
!
interface Dialer0
description Connection to WIND ADSL
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
no ip mroute-cache
dialer pool 1
dialer idle-timeout 0
dialer persistent
no cdp enable
ppp authentication chap callin
ppp chap hostname xxxxxxxxxxxx
ppp chap password 7 xxxxxxxxxxxxxx
!
interface Vlan1
description LAN vlan
ip address 192.168.1.1 255.255.255.0
no ip redirects
no ip proxy-arp
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
no ip mroute-cache
hold-queue 100 out
!
ip nat inside source list 100 interface Dialer0 overload
!
access-list 100 permit ip 192.168.1.0 0.0.0.255 any
!
ip route 0.0.0.0 0.0.0.0 Dialer0
!

Inviato: **lun 06 ago , 2012 6:06 pm**

rieccomi, ho provato ad inserire il codice suggerito, ma niente.... allego l'attuale configurazione e il report dell'errore...

Codice: Seleziona tutto

version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no logging buffered
!
no aaa new-model
!
memory-size iomem 10
crypto pki token default removal timeout 0
!
!
ip source-route
!
!
!
ip cef
ip name-server 8.8.8.8
ip name-server 8.8.4.4
ip ddns update method ccp_ddns1
 DDNS both
!
no ipv6 cef
!
!
multilink bundle-name authenticated
!
!
username ccpuser privilege 15 secret 5 $1$DK2Q$i9rmX.2I32ML1ZrR/XuRq0
!
!
!
!
controller VDSL 0
!
! 
!
!
interface Ethernet0
 no ip address
 no fair-queue
!
interface ATM0
 no ip address
 no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
 description physical ADSL WAN port
 pvc 8/35 
  oam-pvc manage
  encapsulation aal5mux ppp dialer
  dialer pool-member 1
 !
!
interface FastEthernet0
 no ip address
!
interface FastEthernet1
 no ip address
!
interface FastEthernet2
 no ip address
!
interface FastEthernet3
 no ip address
!
interface Vlan1
 ip address 192.168.1.1 255.255.255.0
 no ip redirects
 no ip proxy-arp
 ip nat inside
 ip virtual-reassembly in
 ip tcp adjust-mss 1452
 hold-queue 100 out
!
interface Dialer0
 ip unnumbered Vlan1
 ip mtu 1452
 ip nat inside
 ip virtual-reassembly in
 encapsulation ppp
 dialer pool 1
 dialer-group 1
 ppp authentication chap pap callin
 ppp chap hostname xxxxxx
 ppp chap password 0 xxx
 ppp pap sent-username xxxxxx password 0 xxxxxxx
 ppp multilink
!
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
ip nat pool 192.168.1.0 192.168.1.255 netmask 255.255.255.0
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source list 100 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
!
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 100 permit ip 192.168.1.0 0.0.0.255 any
dialer-list 1 protocol ip permit
!
!
!
!
line con 0
line aux 0
line vty 0 4
 login local
 transport input telnet
!
end

allego il report dell'errore...

Pinging to destination host... Failed
Destination pinged to :8.8.8.8
Size of the ping packet (in bytes) :100
Timeout interval :2
Number of ping packets sent to the destination address :5
Ping reply validated :No
Fragmentation allowed on ping packet :No
Destination pinged to :8.8.4.4
Size of the ping packet (in bytes) :100
Timeout interval :2
Number of ping packets sent to the destination address :5
Ping reply validated :No
Fragmentation allowed on ping packet :No

altri suggerimenti

Inviato: **lun 06 ago , 2012 7:24 pm**

RISOLTOOOOO ... adesso FUNZIONAAAA

Ho ripulito la configurazione e settato i parametri come indicato nella configurazione di anubisg1... grazie tante a tutti

Inviato: **mar 07 ago , 2012 12:11 pm**

peeerfetto

Inviato: **gio 29 mag , 2014 1:16 pm**

Alex13 ha scritto:RISOLTOOOOO ... adesso FUNZIONAAAA
Ho ripulito la configurazione e settato i parametri come indicato nella configurazione di anubisg1... grazie tante a tutti

Gentilmente se hai risolto la puoi ripostare... Funzionante?
Grazie

CiscoForums.it

ADSL INFOSTRADA CON 887 VA - RISOLTO

ADSL INFOSTRADA CON 887 VA - RISOLTO

Re: ADSL INFOSTRADA CON 887 VA

Re: ADSL INFOSTRADA CON 887 VA

Re: ADSL INFOSTRADA CON 887 VA

Re: ADSL INFOSTRADA CON 887 VA

Re: ADSL INFOSTRADA CON 887 VA

Re: ADSL INFOSTRADA CON 887 VA

Re: ADSL INFOSTRADA CON 887 VA

Re: ADSL INFOSTRADA CON 887 VA

Re: ADSL INFOSTRADA CON 887 VA

Re: ADSL INFOSTRADA CON 887 VA

Re: ADSL INFOSTRADA CON 887 VA

Re: ADSL INFOSTRADA CON 887 VA - RISOLTO

Re: ADSL INFOSTRADA CON 887 VA