ho recuperato in azienda un cisco 877
ora lo sto usando a casa, volevo chiedere se il firmware adsl (non l'ios) e' aggiornato o se bisogna aggiornarlo
vi posto un po' di dati:
Directory of flash:/
2 -rwx 18950320 --- -- ---- --:--:-- ----- c870-advipservicesk9-mz.124-15.T7.bin
3 -rwx 977896 Mar 1 2002 01:02:56 +01:00 adsl_alc_20190.bin
4 -rwx 3179 Mar 1 2002 01:04:32 +01:00 sdmconfig-8xx.cfg
5 -rwx 931840 Mar 1 2002 01:04:50 +01:00 es.tar
6 -rwx 1505280 Mar 1 2002 01:05:13 +01:00 common.tar
7 -rwx 1038 Mar 1 2002 01:05:23 +01:00 home.shtml
8 -rwx 112640 Mar 1 2002 01:05:36 +01:00 home.tar
27611136 bytes total (5120000 bytes free)
ATM0
Alcatel 20190 chipset information
ATU-R (DS) ATU-C (US)
Modem Status: Showtime (DMTDSL_SHOWTIME)
DSL Mode: ITU G.992.5 (ADSL2+) Annex A
ITU STD NUM: 0x03 0x2
Chip Vendor ID: 'STMI' 'IFTN'
Chip Vendor Specific: 0x0000 0x8273
Chip Vendor Country: 0x0F 0xB5
Modem Vendor ID: 'CSCO' ' '
Modem Vendor Specific: 0x0000 0x0000
Modem Vendor Country: 0xB5 0x00
Serial Number Near: FHK132035CK
Serial Number Far:
Modem VerChip ID: C196 (0) capability-enabled
DFE BOM: DFE2.6 Annex A (0)
Capacity Used: 82% 100%
Noise Margin: 12.0 dB 7.0 dB
Output Power: 14.0 dBm 12.5 dBm
Attenuation: 6.0 dB 5.0 dB
Defect Status: None None
Last Fail Code: None
Watchdog Counter: 0x95
Watchdog Resets: 0
Selftest Result: 0x00
Subfunction: 0x00
Interrupts: 12175 (0 spurious)
PHY Access Err: 0
Activations: 1
LED Status: ON
LED On Time: 100
LED Off Time: 100
Init FW: init_AMR-2.6.004.bin
Operation FW: AMR-2.6.004.bin
FW Source: external
FW Version: 2.6.4
DS Channel1 DS Channel0 US Channel1 US Channel0
Speed (kbps): 0 19715 0 1032
Cells: 0 27411792 0 3363284
Reed-Solomon EC: 0 2 0 0
CRC Errors: 0 0 0 0
Header Errors: 0 0 0 0
Total BER: 0E-0 0E-0
Leakage Average BER: 0E-0 0E-0
Interleave Delay: 0 0 0 6
ATU-R (DS) ATU-C (US)
Bitswap: enabled enabled
Bitswap success: 0 0
Bitswap failure: 0 0
grazie
