interface Tunnel bandwidth

Virtual private networks e affini

Moderatore: Federico.Lagni

Rispondi
gerdetti
n00b
Messaggi: 8
Iscritto il: mer 03 giu , 2009 9:30 pm

Ciao a tutti,

scrivo al forum per avere un piccolo chiarimento :)

Tunnel999 is up, line protocol is up
Hardware is Tunnel
Description: tunnel to dc
Interface is unnumbered. Using address of Loopback1 (10.200.34.60)
MTU 1514 bytes, BW 9 Kbit, DLY 500000 usec,
reliability 255/255, txload 41/255, rxload 1/255
Encapsulation TUNNEL, loopback not set
Keepalive not set
Tunnel source 10.200.34.60 (Loopback1), destination 10.200.36.4
Tunnel protocol/transport GRE/IP
Key disabled, sequencing disabled
Checksumming of packets disabled
Tunnel TTL 255
Fast tunneling enabled
Tunnel transmit bandwidth 8000 (kbps)
Tunnel receive bandwidth 8000 (kbps)
Last input 00:00:04, output 00:00:06, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 94
Queueing strategy: fifo
Output queue: 0/0 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 5000 bits/sec, 5 packets/sec
24037 packets input, 3913772 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
222138 packets output, 26016430 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out

Vi chiedo se la banda del tunnel può influire sulla capacità e prestazione della linea.

Grazie
Emiliano
Rispondi