Ciao a tutto ho il seguente problema:
Ho un cisco 837 che sto tentando di configuraro in EasyVPN verso un concentratore e mi è stato fornito il seguente codice:
### SET IPSEC POLICY ###
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp keepalive 10
crypto ipsec transform-set pippo esp-3des esp-md5-hmac
### SET IPSEC CLIENT CONFIG ###
crypto ipsec client ezvpn cippa
connect auto
group cippa key pippo
mode network-extension
peer 1.1.1.1
username wer password wer
xauth userid mode local
### INTERFACCIA ETHERNET ###
crypto ipsec client ezvpn cippa inside
### INTERFACCIA DIALER1 ###
crypto ipsec client ezvpn cippa
di tutto questo codice va tutto bene tranne xauth userid mode local che non lo accetta come stringa e cercando in giro ho trovato che solo da una determinata release è disponibile.
Siccome il router deve aprire automaticamente la connessione e mandare username e password per l'accesso come posso risolvere la mancanza dell' xauth?
Server a qualcosa il aaa new-model? aaa authorization? aaa authentication?
Vi ringrazio anticipatamente
se può servire uno show version:
Router#show ver
Cisco Internetwork Operating System Software
IOS (tm) C837 Software (C837-K9O3Y6-M), Version 12.3(2)XC2, EARLY DEPLOYMENT REL
EASE SOFTWARE (fc1)
Synched to technology version 12.3(1.6)T
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Thu 04-Mar-04 01:13 by ealyon
Image text-base: 0x800131E8, data-base: 0x80B93040
ROM: System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)
ROM: C837 Software (C837-K9O3Y6-M), Version 12.3(2)XC2, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
Grazie
Dok
problema xauth cisco 837
Moderatore: Federico.Lagni