Pagina 1 di 1
					
				Configurazione VOIP
				Inviato: dom 08 lug , 2007 3:14 pm
				da xivid
				Ho un router con 2801 + ADVIPSERVICES.
Ho due telefoni SIP.
Qualcuno potrebbe indicarmi come far eseguire a questi due telefoni la registrazione sul CCME?
Sono nuovo in materia e non so da dove partire.
			 
			
					
				
				Inviato: mar 10 lug , 2007 1:10 pm
				da ndiego75
				Ti consiglio di dare una letta alla administrator guide del CME 
http://www.cisco.com/en/US/partner/prod ... #wp1025405
dove ti riporta step by step come fare, se poi hai qualche altro dubbio...
Ciao
 
			
					
				
				Inviato: ven 13 lug , 2007 7:38 pm
				da xivid
				Uhm,
un tutorial in italiano?
			 
			
					
				
				Inviato: lun 16 lug , 2007 12:53 pm
				da ndiego75
				No, non esiste nulla. C'era una guida tempo fa in italiano ma era relativa al ITS 2.0 e non c'erano queste features.
			 
			
					
				
				Inviato: gio 19 lug , 2007 6:45 pm
				da xivid
				Ok
chi fa da se fa per 33.
Questa configurazione è funzionante.
C'è qualcosa che forse va tolto.
Vorrei solo sapere come collegare più di un provider VOIP.
--------------------------------
Building configuration...
Current configuration : 6661 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname wan
!
boot-start-marker
boot system flash c2801-advipservicesk9-mz.124-11.T.bin
boot-end-marker
!
logging buffered 51200 warnings
!
aaa new-model
!
!
aaa authentication login default group radius
aaa authorization auth-proxy default group radius
!
!
aaa session-id common
ip cef
!
!
no ip dhcp use vrf connected
!
ip dhcp pool VOIP-POOL
   network 192.168.25.0 255.255.255.0
   option 150 ip 192.168.25.1 <-- Secondo me va tolto
   default-router 192.168.25.1
!
ip dhcp pool XXX-POOL
   network 192.168.40.0 255.255.255.0
   default-router 192.168.40.1
!
!
ip domain name xxxxxx.it
ip auth-proxy name AUTH_PROXY http inactivity-time 10 list 130
!
multilink bundle-name authenticated
!
!
!
voice-card 0
!
!
!
voice service voip
 allow-connections sip to sip
 sip
  registrar server expires max 600 min 60
!
!
!
!
!
!
!
!
!
!
!
voice register global
 mode cme
 source-address 192.168.25.1 port 5060  <-- Secondo me va tolto
 max-dn 144
 max-pool 24
 dialplan-pattern 1 8882000 extension-length 4 <-- Secondo me va tolto
 file text
!
voice register dn  10
 number 2000
 name 2000
 label 2000
!
voice register dn  30
 number 3000
 name 3000
 label 3000
!
voice register dn  40
 number 4000
 name 4000
 label 4000
!
voice register pool  1
 id mac 0014.2260.87DF
 number 1 dn 10
 max registrations 36
 username 2000 password 2000
 codec g711ulaw
!
voice register pool  3
 id mac 0013.E00B.214E
 number 3 dn 30
 max registrations 36
 username 3000 password 3000
 codec g711ulaw
!
voice register pool  4
 id mac 0013.7287.AE89
 number 4 dn 40
 username 4000 password 4000
 codec g711ulaw
!
!
!
!
!
!
username admin privilege 15 secret 5 XXXXXXXXXXXXXXXXXXXXXXXX
!
!
!
!
!
!
!
interface FastEthernet0/0
 ip address 192.168.15.1 255.255.255.252
 ip nbar protocol-discovery
 ip nat inside
 ip auth-proxy AUTH_PROXY
 ip virtual-reassembly
 ip route-cache flow
 duplex auto
 speed auto
!
interface FastEthernet0/0.1
 encapsulation dot1Q 40
 ip address 192.168.40.1 255.255.255.0
 ip nbar protocol-discovery
 ip nat inside
 ip virtual-reassembly
!
interface FastEthernet0/0.2
 encapsulation dot1Q 25
 ip address 192.168.25.1 255.255.255.0
!
interface FastEthernet0/1
 ip address XXX.XXX.XXX.XXX 255.255.255.240
 ip nbar protocol-discovery
 ip route-cache flow
 duplex auto
 speed auto
!
interface Serial0/3/0
 no ip address
 encapsulation frame-relay IETF
!
interface Serial0/3/0.1 point-to-point
 ip address XXX.XXX.XXX.XXX 255.255.255.252
 ip nbar protocol-discovery
 ip flow ingress
 ip nat outside
 ip virtual-reassembly
 frame-relay interface-dlci 183
!
ip route 0.0.0.0 0.0.0.0 Serial0/3/0.1
ip route 192.168.20.0 255.255.255.0 192.168.15.2
ip route 192.168.30.0 255.255.254.0 192.168.15.2
ip route 192.168.35.0 255.255.255.0 192.168.15.2
ip route 192.168.45.0 255.255.255.0 192.168.15.2
ip route 192.168.254.0 255.255.255.0 192.168.40.2
!
ip flow-cache timeout active 5
ip flow-export source FastEthernet0/0
ip flow-export version 5
ip flow-export destination XXX.XXX.XXX.XXX 9996
!
ip http server
ip http authentication aaa
no ip http secure-server
ip nat inside source list 1 interface Serial0/3/0.1 overload
!
access-list 1 permit 192.168.20.0 0.0.0.255
access-list 1 permit 192.168.30.0 0.0.1.255
access-list 1 permit 192.168.40.0 0.0.0.255
access-list 1 permit 192.168.35.0 0.0.0.255
access-list 1 permit 192.168.45.0 0.0.0.255
access-list 130 permit ip 192.168.20.0 0.0.0.255 any
access-list 130 deny   ip any any
access-list compiled
snmp-server community xxxx RO
snmp-server community xxxx RW  <-- Secondo me va tolto
snmp-server ifindex persist
!
!
!
!
!
radius-server host 192.168.31.31 auth-port 1812 acct-port 1813 key 7 060506324F41080C111F
!
control-plane
!
!
!
!
!
!
!
dial-peer voice 1 voip
 destination-pattern 0.T
 session protocol sipv2
 session target ipv4:194.221.62.198:5060
 session transport udp
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!
!
sip-ua
 authentication username XXXXX password XXXXXXXXXX
 calling-info pstn-to-sip from name set XXXXX
 retry invite 4
 retry response 3
 retry bye 2
 retry cancel 2
 retry options 0
 registrar ipv4:194.221.62.198:5060 expires 3600
 sip-server ipv4:194.221.62.198:5060
!
!
!
telephony-service
 max-conferences 4 gain -6
 call-forward pattern 0.T <-- Secondo me va tolto
 transfer-system full-consult
!
!
line con 0
line aux 0
line vty 0 4
 access-class 23 in
 exec-timeout 40 0
 privilege level 15
 transport input telnet ssh
line vty 5 15
 access-class 23 in
 exec-timeout 40 0
 privilege level 15
 transport input telnet ssh
!
scheduler allocate 20000 1000
end