IOS 12.3(14)T7 - comando sip-ua non riconosciuto

[scarpy]

Ciao a tutti!!
Sarà probabilmente una sciocchezza, ma non riesco a
configurare il mio router 827-4V con skypho.

Il problema è a monte di tutto:
Infatti non riesco a dargli il comando sip-ua:

router(config)#sip-ua


sip-ua
^
% Invalid input detected at '^' marker.

Allego le configurazioni..
++++++++++++++++++++++++++++++
show flash:
++++++++++++++++++++++++++++++
System flash directory:
File Length Name/status
1 5607392 c820-oy6-mz.123-14.T7.bin
[5607456 bytes used, 2519004 available, 8126460 total]
8192K bytes of processor board System flash (Read/Write)

++++++++++++++++++++++++++++++
show version
++++++++++++++++++++++++++++++
Cisco IOS Software, C820 Software (C820-OY6-M), Version 12.3(14)T7, RELEASE SOFT
WARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 23-Mar-06 07:15 by pwade

ROM: System Bootstrap, Version 12.2(4r)XM2, RELEASE SOFTWARE (fc1)

scarpy_voip uptime is 23 minutes
System returned to ROM by reload
System image file is "flash:c820-oy6-mz.123-14.T7.bin"
Host configuration file is "tftp://192.168.1.2/scarpy_voip-confg"

Cisco C827-4V (MPC855T) processor (revision 0x801) with 31744K/1024K bytes of me
mory.
Processor board ID JAD07100DZC (309407588), with hardware revision 0000
CPU rev number 5
1 Ethernet interface
1 ATM interface
128K bytes of NVRAM.
8192K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2142

++++++++++++++++++++++++++++++
show startup-config
++++++++++++++++++++++++++++++
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname scarpy_voip
!
boot-start-marker
boot-end-marker
!
enable secret 5 XXXXXXXXXXXXXXX
enable password XXXXX
!
no aaa new-model
!
resource policy
!
ip subnet-zero
no ip routing
no ip dhcp use vrf connected
!
!
!
!
!
!
interface Ethernet0
ip address 192.168.1.210 255.255.255.0
no ip route-cache
no cdp enable
hold-queue 100 out
!
interface ATM0
no ip address
no ip route-cache
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
!
ip classless
no ip http server
!
!
snmp-server community public RO
!
control-plane
!
!
line con 0
line vty 0 4
password scarpy71
login
!
scheduler max-task-time 5000
no process cpu extended
no process cpu autoprofile hog
end

++++++++++++++++++++++++++++++

Grazie per l'aiuto!!!
Alessandro

[TheIrish]

Se non sbaglio, i comandi di autenticazione sip sono prosenti solo in IOS che presentano feature set VOICE, successivi alla 12.3( 8 )T.
Non mi sembra di vedere voice da nessuna parte...

[scarpy]

Tra questi IOS quali hanno le funzioni VOICE ?

c820-k9osv6y6-mz.123-19.bin
c820-k9osv6y6-mz.123-5a.bin
c820-ov6y6-mz.124-3.bin
c820-sv6y6-mz.123-7.t.bin

c820-k9osy6-mz.123-8.T11.bin
c820-y6-mz.122-8.T5.bin

Quale è il codice che indica tali funzioni ??

Grazie,
AS