Sono nuovo di questo mondo spero possiate aiutarmi :(
Inviato: mer 19 mag , 2010 10:54 am
Salve a tutti,
mi hanno regalato un vecchio Cisco 1750 dove ho collegato un vic-2bri nt/te acquistata su internet. Volevo configurarlo come gateway e girare le chiamate che arrivano su di lui sulle bri in SIP verso il mio centralino casalingo.
Ho provato a configurarlo da solo e prima di tutto ho fatto dei comandi base per vedere se la versione IOS è compatibile con la VIC ma viene fuori questo errore "Unknown WAN daughter card" sullo slot 2 dove c'è la Vic.
L'ho messa li xche sopra c'è scritto che accetta solo le schede con supporto audio.
Ecco le altre info:
r-frank#show diag
Slot 0:
C1750 1FE VE Mainboard port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware revision 5.1 Board revision A0
Serial number 173062459 Part number 73-3743-05
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 C9 05 01 0A 50 B9 3B 49 0E 9F 05 00 00 00 00
0x30: 50 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00
Packet Voice DSP Module:
Hardware Revision : 2.2
Part Number : 73-3741-01
Board Revision : A0
Deviation Number : 0-0
Fab Version : 02
PCB Serial Number : ICP034100RP
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 02
Number of DSP's : 1
Type of DSP : TMS320C549
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 01 5A 41 02 02 82 49 0E 9D 01 42 41 30
0x10: 80 00 00 00 00 02 02 C1 8B 49 43 50 30 33 34 31
0x20: 30 30 52 50 03 00 81 00 00 00 00 04 00 09 02 FF
WIC Slot 2:
Unknown WAN daughter card
Hardware revision 64.0 Board revision 0x42
Serial number 1363214593 Part number 192-17923-32
Test history 0x00 RMA number 85-101-03
Connector type PCI
EEPROM format version 4
EEPROM contents (hex):
0x20: 04 FF 40 00 51 41 01 01 C0 46 03 20 00 55 65 03
0x30: 42 42 30 80 00 00 00 00 02 02 C1 8B 46 4F 43 31
r-frank#show version
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SV3Y-M), Version 12.0(5)XQ1, EARLY DEPLOYMENT REL
EASE SOFTWARE (fc1)
TAC:Home:SW:IOS:Specials for info
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 23-Nov-99 11:21 by sharpd
Image text-base: 0x80008088, data-base: 0x80789B9C
ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-SV3Y-M), Version 12.0(5)XQ1, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
r-frank uptime is 2 hours, 30 minutes
System returned to ROM by power-on
System image file is "flash:c1700-sv3y-mz.120-5.XQ1"
cisco 1750 (MPC860) processor (revision 0x501) with 18432K/6144K bytes of memory
.
Processor board ID JAD04011ZAV (173062459), with hardware revision 0000
M860 processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Se il problema è la IOS sapete dirmi che versione devono montare?
Grazie in Anticipo a tutti
mi hanno regalato un vecchio Cisco 1750 dove ho collegato un vic-2bri nt/te acquistata su internet. Volevo configurarlo come gateway e girare le chiamate che arrivano su di lui sulle bri in SIP verso il mio centralino casalingo.
Ho provato a configurarlo da solo e prima di tutto ho fatto dei comandi base per vedere se la versione IOS è compatibile con la VIC ma viene fuori questo errore "Unknown WAN daughter card" sullo slot 2 dove c'è la Vic.
L'ho messa li xche sopra c'è scritto che accetta solo le schede con supporto audio.
Ecco le altre info:
r-frank#show diag
Slot 0:
C1750 1FE VE Mainboard port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware revision 5.1 Board revision A0
Serial number 173062459 Part number 73-3743-05
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 C9 05 01 0A 50 B9 3B 49 0E 9F 05 00 00 00 00
0x30: 50 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00
Packet Voice DSP Module:
Hardware Revision : 2.2
Part Number : 73-3741-01
Board Revision : A0
Deviation Number : 0-0
Fab Version : 02
PCB Serial Number : ICP034100RP
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 02
Number of DSP's : 1
Type of DSP : TMS320C549
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 01 5A 41 02 02 82 49 0E 9D 01 42 41 30
0x10: 80 00 00 00 00 02 02 C1 8B 49 43 50 30 33 34 31
0x20: 30 30 52 50 03 00 81 00 00 00 00 04 00 09 02 FF
WIC Slot 2:
Unknown WAN daughter card
Hardware revision 64.0 Board revision 0x42
Serial number 1363214593 Part number 192-17923-32
Test history 0x00 RMA number 85-101-03
Connector type PCI
EEPROM format version 4
EEPROM contents (hex):
0x20: 04 FF 40 00 51 41 01 01 C0 46 03 20 00 55 65 03
0x30: 42 42 30 80 00 00 00 00 02 02 C1 8B 46 4F 43 31
r-frank#show version
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SV3Y-M), Version 12.0(5)XQ1, EARLY DEPLOYMENT REL
EASE SOFTWARE (fc1)
TAC:Home:SW:IOS:Specials for info
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 23-Nov-99 11:21 by sharpd
Image text-base: 0x80008088, data-base: 0x80789B9C
ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-SV3Y-M), Version 12.0(5)XQ1, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
r-frank uptime is 2 hours, 30 minutes
System returned to ROM by power-on
System image file is "flash:c1700-sv3y-mz.120-5.XQ1"
cisco 1750 (MPC860) processor (revision 0x501) with 18432K/6144K bytes of memory
.
Processor board ID JAD04011ZAV (173062459), with hardware revision 0000
M860 processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Se il problema è la IOS sapete dirmi che versione devono montare?
Grazie in Anticipo a tutti
