Show diag 1751 FXO

[lorbellu]

Salve a tutti,

Sono alle prese con un vecchio 1751V da trasformare in Voice gateway FXO.
Il router si avvia correttamente ma non vede ne la VIC2FXO ne il modulo PVDM.
Qualcuno potrebbe essere così gentile da postare uno show diag ed uno show ver? In questo modo cerco di sabilire se le schede e/o gli slot funzionano.

Grazie

[lorbellu]

Risolto.

Per info, é stato necessario upgradare l'IOS a enterprise service 12.4.25c (praticamente l'ultima disponibile).
A seguire lo show diag

Codice: Seleziona tutto

Router>sh diag
Slot 0:
        C1751-V FE VE DV Mainboard Port adapter, 4 ports
        Port adapter is analyzed 
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision        : 5.0
        PCB Serial Number        : FOC09131U0J
        Part Number              : 73-7241-05
        Board Revision           : A0
        Fab Version              : 04
        Product (FRU) Number     : CISCO1751
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 02 4D 41 05 00 C1 8B 46 4F 43 30 39 31
          0x10: 33 31 55 30 4A 82 49 1C 49 05 42 41 30 02 04 FF
          0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        Packet Voice DSP Module Slot 0:
        Hardware Revision        : 3.2
        Part Number              : 73-6726-01
        Board Revision           : A0
        Deviation Number         : 0-0
        Fab Version              : 03
        PCB Serial Number        : VIC090366QJ
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Processor type           : 02 
        Number of DSP's          : 1
        DSP memory size(in kwords): 256
        Type of DSP              : TMS320C549
        Product (FRU) Number     : PVDM-256K-4=
        EEPROM format version 4
        EEPROM contents (hex):
        0x00:   04 FF 40 02 AC 41 03 02 82 49 1A 46 01 42 41 30 
        0x10:   80 00 00 00 00 02 03 C1 8B 56 49 43 30 39 30 33 
        0x20:   36 36 51 4A 03 00 81 00 00 00 00 04 00 09 02 FF 

        Packet Voice DSP Module Slot 1:
        Not populated

        WIC/VIC Slot 1:
        Alcatel 20150 ADSL WIC
        Daughter card-Version 4 TLV Cookie Format
        Hardware Revision        : 2.3
        Part Number              : 73-4771-09
        Board Revision           : C0
        Deviation Number         : 0-0
        Fab Version              : 05
        PCB Serial Number        : FOC08163MTE
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Product (FRU) Number     : WIC-1ADSL=


        VIC Slot 2:
        Dual FXO Voice Interface Card
        Hardware revision 1.1   Board revision E0
        Serial number     0010328125    Part number    800-02495-01
        FRU Part Number   VIC-2FXO=

        Test history      0x00          RMA number     00-00-00
        Connector type    WAN Module
        EEPROM format version 1
        EEPROM contents (hex):
        0x20:   01 0D 01 01 00 9D 98 3D 50 09 BF 01 00 00 00 00 
        0x30:   70 00 00 00 98 10 24 01 FF FF FF FF FF FF FF FF 

[crisalf76]

Secondo quello che vedo sullo show diag sia l'FXO che la pwdm viene detectata correttamente.
facendo "show runn" le voice port non le vedi ?
poi prova a mettere una ios più vecchiotta tipo c1700-spservicesk9-mz.124-9.T7