Errori Self Study Guide ICND1 640-822

CCNA, CCNP, CCSP, CCVP, CCIE e tutti gli altri percorsi di certificazione Cisco.

Moderatore: Federico.Lagni

Rispondi
vinnie
n00b
Messaggi: 8
Iscritto il: mar 10 ago , 2010 4:53 pm

Ciao a tutti,
sto studiando la Self Study Guide ICND1 Second Edition per dare il 640-822...

Tuttavia ho un po di confusione poichè sto trovando nelle soluzioni degli esercizi quelli che penso siano errori.

Voi ne avete trovato, vi risultano?
Avatar utente
valerio1976
Network Emperor
Messaggi: 263
Iscritto il: ven 05 mar , 2010 9:05 am

x esempio quali ?
vinnie
n00b
Messaggi: 8
Iscritto il: mar 10 ago , 2010 4:53 pm

Capitolo 1 - Domanda 3:

3. What is the purpose of a switch?

Risposta del Libro:
c. To serve as the endpoint in the network, sending and receiving data

A mio avviso la risposta dovrebbe essere:
d. To provide network attachment to the end systems and intelligent switching of
the data within the local network



Capitolo 1 - Domanda 4:

4. What is the purpose of network interconnections?

Risposta del Libro:
d. To provide network attachment to the end systems and intelligent switching of
the data within the local network


Secondo me la risposta è:
c. To provide a means for data to travel from one point to another in the network


Capitolo 1 - Domanda 22:

22. Which area of the OSI model and the TCP/IP stack is most diverse?

Risposta del Libro:
b. transport layer

Secondo me le risposte possibili sono:
c. application layer
d. data link layer



Capitolo 2 - Domanda 23:
23. Match each of the following steps of the physical Catalyst switch startup process to its
description.


Risposta del Libro:
_A__Step 1
_B__Step 2
_C__Step 3


Secondo me i passi sono:
_C__Step 1
_A__Step 2
_B__Step 3



Capitolo 2 - domanda 31:
31. Which show command requires you to have privileged EXEC mode access?

La risposta del libro è:
c. show running

Penso che si tratti di un errore ortografico, il comando è:
show running-config



fatemi sapere se siete d'accordo!
Grazie
Avatar utente
carini
Network Emperor
Messaggi: 275
Iscritto il: mar 18 apr , 2006 2:17 pm
Località: Como
Contatta:

vinnie ha scritto:Capitolo 1 - Domanda 3:

3. What is the purpose of a switch?

Risposta del Libro:
c. To serve as the endpoint in the network, sending and receiving data

A mio avviso la risposta dovrebbe essere:
d. To provide network attachment to the end systems and intelligent switching of
the data within the local network

Non ho letto quel libro ma direi che sono d'accordo con te.
vinnie ha scritto: Capitolo 1 - Domanda 4:

Secondo me la risposta è:
c. To provide a means for data to travel from one point to another in the network
Anche qui
vinnie ha scritto:
Capitolo 1 - Domanda 22:

22. Which area of the OSI model and the TCP/IP stack is most diverse?
Quali erano le altre risposte possibili?
vinnie ha scritto: Capitolo 2 - Domanda 23:
23. Match each of the following steps of the physical Catalyst switch startup process to its

Dovresti dettagliare di più questa domanda ... non ho il testo di riferimento a disposizione

vinnie ha scritto: Capitolo 2 - domanda 31:
La risposta del libro è:
c. show running

Penso che si tratti di un errore ortografico, il comando è:
show running-config


In effetti funzionano tutte e due, esattamente come funziona anche il solo sh run ...
Immagine
vinnie
n00b
Messaggi: 8
Iscritto il: mar 10 ago , 2010 4:53 pm

carini ha scritto: Dovresti dettagliare di più questa domanda ... non ho il testo di riferimento a disposizione
23. Match each of the following steps of the physical Catalyst switch startup process to its
description.

___ Step 1
___ Step 2
___ Step 3

a. Attach the power cable plug to the switch power supply socket.
b. Observe the boot sequence, including the Cisco IOS Software output text on the
console.
c. Verify that all cable connections are secure, the terminal is connected to the console
port, and the console terminal application is selected.

Le soluzioni del libro dicono:

_A__Step 1
_B__Step 2
_C__Step 3

Secondo me (e secondo quanto è spiegato a pag.163 dello stesso libro) i passi sono:
_C__Step 1
_A__Step 2
_B__Step 3


carini ha scritto: In effetti funzionano tutte e due, esattamente come funziona anche il solo sh run ...
Perfetto, show running non è un errore ;)
Avatar utente
carini
Network Emperor
Messaggi: 275
Iscritto il: mar 18 apr , 2006 2:17 pm
Località: Como
Contatta:

vinnie ha scritto:
Secondo me (e secondo quanto è spiegato a pag.163 dello stesso libro) i passi sono:
_C__Step 1
_A__Step 2
_B__Step 3
Anche qui sono d'accordo con te.
vinnie ha scritto: Perfetto, show running non è un errore ;)
Anche se è strano che ti diano due risposte entrambe corrette ... nel dubbio preferisci la forma estesa invece che quella abbreviata
Immagine
ale123
Cisco enlightened user
Messaggi: 162
Iscritto il: ven 04 dic , 2009 9:43 am

Caspiterina, è sbagliato metà libro:
http://www.ciscopress.com/content/image ... Errata.doc
vinnie
n00b
Messaggi: 8
Iscritto il: mar 10 ago , 2010 4:53 pm

Pazzesco!

Hanno commesso errori anche nell'errata corrige:

Chapter 1, Page 125, Question 2
Answer given: A
Should be: C,E


La risposta E non esiste!!! :shock:
ale123
Cisco enlightened user
Messaggi: 162
Iscritto il: ven 04 dic , 2009 9:43 am

In tal caso, faranno una errata corrige della errata corrige?
vinnie
n00b
Messaggi: 8
Iscritto il: mar 10 ago , 2010 4:53 pm

:lol:
vinnie
n00b
Messaggi: 8
Iscritto il: mar 10 ago , 2010 4:53 pm

penso di aver scovato un nuovo errore! Condividete?

Capitolo 4, domanda 7:

7. Which of the following statements describe the function of routing tables? (Choose three.)
a. Routing tables provide an ordered list of known network addresses.
b. Routing tables are maintained through the transmission of MAC addresses.
c. Routing tables contain metrics that are used to determine the desirability of the route.
d. Routing table associations tell a router that a particular destination is either directly connected to the router or that it can be reached through another router (the next-hop router) on the way to the final destination.
e. When a router receives an incoming packet, it uses the source address and searches the routing table to find the best path for the data from that source.
f. Although routing protocols vary, routing metrics do not.

Secondo me le risposte corrette sono: A, C, D
Secondo il libro: B, C, E

Secondo voi?
Avatar utente
carini
Network Emperor
Messaggi: 275
Iscritto il: mar 18 apr , 2006 2:17 pm
Località: Como
Contatta:

vinnie ha scritto:penso di aver scovato un nuovo errore!
Secondo me le risposte corrette sono: A, C, D
Secondo il libro: B, C, E
Direi di sì ... la E è sicuramente sbagliata dato che parla di source address e non di destination ... la A dovrebbe essere giusta anche se quell'"ordered" non mi souna bene (al limite dovrebbe essere "organized")

B e F sono false come una moneta da 3 euro ...
Immagine
vinnie
n00b
Messaggi: 8
Iscritto il: mar 10 ago , 2010 4:53 pm

invoco ancora il vostro prezioso aiuto, sto trovando tantissimi errori negli esercizi del quinto capitolo...

15. Which three statements accurately describe cable connections?
a. Originally, cable was a one-directional medium designed to carry broadcast
digital video channels to customers (or subscribers).
b. Some cable service providers promise data speeds of up to 20 times that of T1
leased lines.
c. The original purpose of the Multimedia Cable Network System Partners Ltd. was
to define a product and system standard capable of providing data and future services
over CATV plants.
d. Cable modems enable two-way, high-speed data transmissions using the same
coaxial lines that transmit cable television.
e. Cable modem access provides speeds superior to leased lines, with lower costs
and simpler installation.
f. Cable modems use the telephone system infrastructure, so local-loop charges
apply.

il libro dice: C, D, E
io dico: A, C, D



19. When configuring NAT, the Internet interface is considered which of the following?
a. NAT local interface
b. NAT inside interface
c. NAT global interface
d. NAT outside interface

il libro dice: D
io sono indeciso tra: C e D si accettano chiarimenti :)


21. You are troubleshooting a NAT connectivity problem on a Cisco router. You determine
that the appropriate translation is not installed in the translation table. Which three
actions should you take?

a. Determine if you have enough addresses in the NAT pool.
b. Run debug ip nat detailed to determine the source of the problem.
c. Use the show ip route command to verify that the selected route exists.
d. Verify that the router interfaces are appropriately defined as NAT inside or NAT
outside.
e. Verify that the ACL referenced by the NAT command is permitting all necessary
inside local IP addresses.

il libro dice: A, D, E
io dico: A, C, D



23. What does the command ip route 186.157.5.0 255.255.255.0 10.1.1.3 specify?
a. Both 186.157.5.0 and 10.1.1.3 use a mask of 255.255.255.0.
b. The router should use network 186.157.5.0 to get to address 10.1.1.3.
c. You want the router to trace a route to network 186.157.5.0 via 10.1.1.3.
d. The router should use address 10.1.1.3 to get to devices on network 186.157.5.0.

il libro dice: D
io sono indeciso tra: C, D



45. Which command correctly specifies RIP as the routing protocol?
a. Router(config)#rip
b. Router(config)#router rip
c. Router(config-router)#rip {AS no.}
d. Router(config-router)#router rip {AS no.}

il libro dice: B
io dico: D


grazie!
Rispondi