CiscoForums.it

salve...ho appena comprato su ebay un wic adsl e lo vorrei montare sul mio router serie 1600 solo che trovo delle complicazioni, sembra a occhio che il router non riesca iniziare la periferica adsl wic o altro...ho aggiornato anche la ios da tftp ma non cambia

potrebbe essere rotto il wic o richide un aggiornamento specifico IOS ?

sh ver
IOS (tm) 1600 Software (C1600-Y-M), Version 12.0(9), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 25-Jan-00 00:11 by bettyl
Image text-base: 0x02005000, data-base: 0x0246E5D8

ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
ROM: 1600 Software (C1600-RBOOT-R), Version 12.0(3)T, RELEASE SOFTWARE (fc1)

Router uptime is 1 minute
System restarted by reload
System image file is "flash:C1600-Y-Mz-120-9.bin"

cisco 1601 (68360) processor (revision C) with 7680K/512K bytes of memory.
Processor board ID 16992049, with hardware revision 00000002
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial(sync/async) network interface(s)
Unrecognized interface found (0-1 = Motherboard interfaces 2 = WIC)
Interface 2 unrecognized by software
System/IO memory with parity disabled
8192K bytes of DRAM onboard
System running from RAM

[quote="vanescar"]salve...ho appena comprato su ebay un wic adsl e lo vorrei montare sul mio router serie 1600 solo che trovo delle complicazioni, sembra a occhio che il router non riesca iniziare la periferica adsl wic o altro...ho aggiornato anche la ios da tftp ma non cambia

potrebbe essere rotto il wic o richide un aggiornamento specifico IOS ?

sh ver
[b]IOS (tm) 1600 Software (C1600-Y-M), Version 12.0(9), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 25-Jan-00 00:11 by bettyl
Image text-base: 0x02005000, data-base: 0x0246E5D8

ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
ROM: 1600 Software (C1600-RBOOT-R), Version 12.0(3)T, RELEASE SOFTWARE (fc1)

Router uptime is 1 minute
System restarted by reload
System image file is "flash:C1600-Y-Mz-120-9.bin"

cisco 1601 (68360) processor (revision C) with 7680K/512K bytes of memory.
Processor board ID 16992049, with hardware revision 00000002
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial(sync/async) network interface(s)
Unrecognized interface found (0-1 = Motherboard interfaces 2 = WIC)
Interface 2 unrecognized by software
System/IO memory with parity disabled
8192K bytes of DRAM onboard
System running from RAM[/b][/quote]

Ciao non so se questa è la sezione giusta per un post simile, cmq il 1601 non supporta le schede WIC-1ADSL dai un occhiata a questo link:
http://www.cisco.com/en/US/products/hw/ ... e37f.shtml
ciao

Grazie...