Pagina 1 di 1

vendo un lab

Inviato: dom 25 nov , 2007 5:21 pm
da omnsb
vendo un lab perfetto per ccna/ccnp
2 router cisco 2610 memorie 16/64
tutti i cavi indispensabili
prezzo 400 euro

Inviato: mar 27 nov , 2007 5:54 pm
da Really75
Ciao puoi postare la configurazione di entrambe le macchine?
Ciao
Grazie

Inviato: ven 30 nov , 2007 4:29 pm
da omnsb
come richiesto

Router1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(17a), RELEASE SOFTWARE (
fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Mon 12-Dec-05 14:13 by evmiller
Image text-base: 0x80008098, data-base: 0x81A044A4

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-IK9O3S3-M), Version 12.3(17a), RELEASE SOFTWARE (fc2)


Router1 uptime is 3 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ik9o3s3-mz.123-17a.bin"

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes of memory
.
Processor board ID JAD0419033I (4205960181)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
9 ISDN Basic Rate interface(s)
Integrated NT1's for 8 ISDN Basic Rate interfaces
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router1#

Router2#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IPBASE-M), Version 12.3(6a), RELEASE SOFTWARE (fc
4)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 02-Apr-04 19:17 by kellythw
Image text-base: 0x80008098, data-base: 0x80ECF498

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Router2 uptime is 4 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ipbase-mz.123-6a.bin"

cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes of memory
.
Processor board ID JAD043305S9 (2118401519)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Low-speed serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router2#
ciao

Inviato: gio 21 feb , 2008 4:38 pm
da omnsb
abbasso il prezzo a 300 euro

Inviato: sab 03 mag , 2008 10:37 pm
da omnsb
sempre disponibile

Inviato: lun 04 ago , 2008 8:52 am
da peterparker
ti ho mandato un messaggio privato.

risposta

Inviato: mar 23 set , 2008 7:19 pm
da omnsb
ti ho risposto
ciao