Salve
Vendo 3 router cisco 2610
Questi sono i rispettivi show version:
----------------------------------------------------------------------------------
1
---------------------------------------------------------------------------------
IOS (tm) C2600 Software (C2600-IS-M), Version 12.1(13), RELEASE SOFTWARE (fc3)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 30-Jan-02 22:19 by kellythw
Image text-base: 0x80008088, data-base: 0x80CED5D8
ROM: System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)
Router uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c2600-is-mz.121-13.bin"
cisco 2610 (MPC860) processor (revision 0x00) with 32768K/8192K bytes of memory.
Processor board ID JAD06380CJX (1746205302)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
--------------------------------------------------------------------------------------
2
------------------------------------------------------------------------------------
Cisco Internetwork Operating System SoftwareSoftware (C2600-I-M), Version 12.0(7)T, REL
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:12 by phanguye
Image text-base: 0x80008088, data-base: 0x807AAF70
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Router uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.120-7.T"
cisco 2610 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of memory
.
Processor board ID JAD04480TXX (3973016645)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
--------------------------------------------------------------------------------------------------------
3
-------------------------------------------------------------------------------------
Cisco Internetwork Operating System Software####################################
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:12 by phanguye
Image text-base: 0x80008088, data-base: 0x807AAF70
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROUTER uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.120-7.T"
cisco 2610 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of memory
.
Processor board ID JAD05041DRE (3149680464)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Ogni router è dotato di una wic 2t con 2 ingressi per cavi seriali (lo potete verificare dallo show version).
Ogni router è fornito con cavo di alimentazione e cavo di collegamento a console.
I router 1 e 3 sono in condizioni estetiche ottime.
Il secondo router esteticamente non è perfetto, la verniciatura è in alcuni punti un po' sciupata, inoltre sempre sul router 2, una delle viti che fa da sede per il bloccaggio della seriale è spezzata (comunque può essere sostituita con un po' di pazienza a costo praticamente zero).
TUTTI E 3 I ROUTER FUNZIONANO PERFETTAMENTE, il secondo ha solo i difetti estetici che vi ho esposto.
prezzi:
router 1 90 euro
router 2 80 euro
router 3 70 euro
il router 1 costa di più in virtù della maggior quantità di memoria, il router 2, pur avendo la stessa dotazione del router 3, costa meno a causa dei difetti di natura estetica che vi ho elencato.
Includo nel prezzo due cavi DTE ai router 1 e 2, un cavo DTE ed un cavo ethernet da 5 metri nel router 3.
Spedizione, a carico vostro, con paccocelere 3 o 1 a vostra scelta.
Possibilità di pagamento in contrassegno (previa comunicazione numero telefonico fisso).
Possibilità di consegna a mano (sto in provincia di Lucca, giudicate voi se la cosa è fattibile).
Se avete domande sono a vostra disposizione.
vendesi 3 cisco 2610 con wic 2t (70 + 80 + 90 EURO) con cavi
Moderatore: Federico.Lagni
-
- n00b
- Messaggi: 2
- Iscritto il: lun 16 lug , 2007 10:16 am