MaiO ha scritto:Il prezzo può essere gusto ma dipende da FLASH/RAM e WIC incluse.
Ciao
L'offerta comprende il router (ovviamente
), 1 porta Ethernet integrata 10/100Mb nel router per collegare fino a 1 Server, o altre apparecchiature direttamente sul router, Interfaccia WIC 2T per il collegamento di HDSL o Modem DCE3 e Cavetteria varia.
Allego SH-Ver dell'apparato:
Router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.0(7)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sun 10-Feb-02 00:28 by ccai
Image text-base: 0x80008088, data-base: 0x80C52A94
ROM: System Bootstrap, Version 12.2(6r), RELEASE SOFTWARE (fc1)
Router uptime is 2 minutes
System returned to ROM by power-on
System image file is "flash:c2600-is-mz.120-7.T2.bin"
cisco 2610 (MPC860) processor (revision 0x00) with 26624K/6144K bytes of memory.
Processor board ID JAD062007L9 (4093207382)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2142
La porta ethernet è 1 per Fastweb non dovrei averne almeno 2??
Grazie ancora