Vendo CISCO 2821 usato solo per TEST wic ADSL e isdn

Leggete l'annuncio prima di postare!

Moderatore: Federico.Lagni

Rispondi
scara89
Cisco fan
Messaggi: 35
Iscritto il: mer 18 giu , 2008 12:24 pm

Vendo Cisco 2821 usato solo per Test, perfetto, davvero un Router potente e carrozzato, Un top di gamma della Cisco. Questo router era usato come router di scorta, tenuto sempre in una scatola configurato pronto a sostituire un altro 2821 usato abitualmente per un wisp di 340 utenti. Gestiva un collegamento affasciato adsl 2+ con HWIC.
Per qualsiasi informazioni non esitate a contattarmi.
Il router è perfettamente funzionante.

Accetto anche il ritiro a mano senza problemi seno spedisco al prezzo di 15 euro.

Prezzo Router 500 €.

[email protected]

Nel router comprendo una interfaccia ADSL e un interfaccia ISDN perfettamente funzionanti.

Allego sh diag: e sh ver:

System Bootstrap, Version 12.4(13r)T11, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.

Initializing memory for ECC
.
c2821 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled


Upgrade ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80

program load complete, entry point: 0x8000f000, size: 0x38814ec
Self decompressing the image : #################################################
################################################################################
################################################################################
################################################################################
####################################### [OK]

Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0003E8 0X00474800 C2821 Mainboard
0X00264050 Onboard VPN
0X000021B8 Onboard USB
0X002C29F0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X00BAE3F8

If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 12Mb.
Using 4 percent iomem. [12Mb/256Mb]

Restricted Rights Legend

Use, duplication, or disclosure by the Go
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9_IVS-M), Version 12.4(
22)YB4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 07-Aug-09 14:42 by prod_rel_team


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Installed image archive
Cisco 2821 (revision 49.46) with 249856K/12288K bytes of memory.
Processor board ID FTX1406AJ55
2 Gigabit Ethernet interfaces
1 ATM interface
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)

System returned to ROM by power-on
System image file is "flash:c2800nm-adventerprisek9_ivs-mz.124-22.YB4.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer an
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco 2821 (revision 53.50) with 249856K/12288K bytes of memory.
Processor board ID FTX1406AJ55
2 Gigabit Ethernet interfaces
1 ATM interface
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)


C2821 Motherboard with 2GE and integrated VPN Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time 00:06:09 ago
Onboard VPN : v2.3.3
EEPROM contents at hardware discovery:
PCB Serial Number : FOC14022F92
Hardware Revision : 1.0
Top Assy. Part Number : 800-26921-04
Board Revision : E0
Deviation Number : 0
Fab Version : 03
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 87
Hardware date code : 20100110
Chassis Serial Number : FTX1406AJ55
Chassis MAC Address : 6416.8dd7.ec20
MAC Address block size : 32
CLEI Code : COMV410ARA
Product (FRU) Number : CISCO2821
Part Number : 73-8853-06
Version Identifier : V06
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 34 30 32 32 46 39 32 40
0x10: 03 E8 41 01 00 C0 46 03 20 00 69 29 04 42 45 30
0x20: 88 00 00 00 00 02 03 03 00 81 00 00 00 00 04 00
0x30: 09 87 83 01 32 B4 0E C2 8B 46 54 58 31 34 30 36
0x40: 41 4A 35 35 C3 06 64 16 8D D7 EC 20 43 00 20 C6
0x50: 8A 43 4F 4D 56 34 31 30 41 52 41 CB 8F 43 49 53
0x60: 43 4F 32 38 32 31 20 20 20 20 20 20 82 49 22 95
0x70: 06 89 56 30 36 20 D9 03 40 C1 C2 FF FF FF FF FF

WIC Slot 2:
DSL SAR (ADSL)

Hardware Revision : 2.3
Part Number : 73-4771-08
Board Revision : B0
Deviation Number : 0-0
Fab Version : 05
PCB Serial Number : FOC073716WM
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : WIC-1ADSL=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 2E 41 02 03 82 49 12 A3 08 42 42 30
0x10: 80 00 00 00 00 02 05 C1 8B 46 4F 43 30 37 33 37
0x20: 31 36 57 4D 03 00 81 00 00 00 00 04 00 FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF F
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 3:
BRI S/T - 2186 WAN daughter card
WIC module not supported/disabled in this slot
Hardware revision 1.3 Board revision A0
Serial number 30112385 Part number 800-01833-03
FRU Part Number WIC-1B-S/T=
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 07 01 03 01 CB 7A 81 50 07 29 03 00 00 00 00
0x30: 50 00 00 00 00 11 28 01 FF FF FF FF FF FF FF FF



Integrated Services for Small and Medium Business

View Interactive 3D Model

The Cisco 2821 Integrated Services Router is part of the Cisco 2800 Integrated Services Router Series which complements the Integrated Services Router Portfolio.

The Cisco 2821 Integrated Services Router provides the following support:

* Wire-speed performance for concurrent services such as security and voice , and advanced services to multiple T1/E1/xDSL WAN rates
* Enhanced investment protection through increased performance and modularity
* Enhanced investment protection through increased modularity
* Increased density through High-Speed WAN Interface Card Slots (four)
* Enhanced Network Module Slot
* Support for over 90 existing and new modules
* Support for majority of existing AIMs, NMs, WICs, VWICs, and VICs
* Two Integrated 10/100/1000 Ethernet ports
* Optional Layer 2 switching support with Power over Ethernet (PoE) (as an option)
* Security
o On-board encryption
o Support of up to 1500 VPN tunnels with the AIM-EPII-PLUS Module
o Antivirus defense support through Network Admission Control (NAC)
o Intrusion Prevention as well as stateful Cisco IOS Firewall support and many more essential security features
* Voice
o Analog and digital voice call support
o Dedicated Extension Voice Module slot
o Optional voice mail support
o Optional support for Cisco CallManager Express (Cisco CME) for local call processing in stand alone business for up to48 IP Phones
o Optional support for Survivable Remote Site Telephony support for local call processing in small enterprise branch offices for up to 48 IP phones


Related Multimedia Demos

* Cisco 2800 Series Portfolio Multimedia Demo*
View this Flash demo to learn more about Cisco Integrated Services Router offerings for small-to-medium sized branch offices and small-to-medium enterprise businesses.

* Minimum requirements to view:
- Internet Explorer 5.5 and higher
- Flash 6 and higher.


Grazie a tutti !!!
Non hai i permessi necessari per visualizzare i file allegati in questo messaggio.
fddi
n00b
Messaggi: 22
Iscritto il: dom 11 apr , 2010 10:24 pm

e' trattabile il prezzo? e' troppo alto
Rispondi