Pagina 1 di 1
ASSWORD RECOVERY FUNCTIONALITY IS DISABLED cisco 1700
Inviato: mer 20 feb , 2008 11:10 am
da marvel
Ciao a tutti.
Ho recuperato da una ditta un cisco 170
Vorrei resettare completamente la configurazione e utilizzarlo per farci un
po di prove.
Sono entrato in console e mi chiede l'autenticazione tramite username e
password,
ho tentato il password recovery di Cisco (con il CTRL-break al boot, per
intenderci ) ma ho notato che durante
il boot stesso compare il messaggio password recovery functionality disabled
che a quanto pare impedisce il password recovery descritto da cisco, e comunque alla fine della procedura cisco mi riporta nuovamente nell'inserimento dell'username e password!
qualcuno mi spiega come poter risolvere il problema?
grazie
Inviato: mer 20 feb , 2008 12:27 pm
da Wizard
It is Joe H. , I have been discussing the "no service password-recovery" command with you.
Bear with me tonight I have had alot of ABSOLUT Vodka so my typing skills are a little impaired, anyway its cracked...TOTALLY!!!!.
Here is what I had to do to crack it.
I'm pasting the entire screen log in so output my be a little long but it is worth it!!!
Router-1#
Router-1#
Router-1#term leng 0
Router-1#sh ru
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router-1
!
enable secret 5 $1$sCnF$E51c1b/cHBjLYLw.zcboU1
!
!
!
!
!
ip subnet-zero
ip tcp synwait-time 15
no ip domain-lookup
!
ip audit notify log
ip audit po max-events 100
cns event-service server
!
!
!
!
end
Router-1#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router-1(config)#no service password-recovery
WARNING:
Executing this command will disable password recovery mechanism.
Do not execute this command without another plan for password recovery.
Are you sure you want to continue? [yes/no]: yes
Router-1(config)#end
Router-1#
00:04:00: %SYS-5-CONFIG_I: Configured from console by console
Router-1#wr mem
Building configuration...
[OK]
Router-1#sh ru
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
no service password-recovery
!
hostname Router-1
!
enable secret 5 $1$sCnF$E51c1b/cHBjLYLw.zcboU1
!
!
!
!
!
ip subnet-zero
ip tcp synwait-time 15
no ip domain-lookup
!
ip audit notify log
ip audit po max-events 100
cns event-service server
!
!
!
!
end
Router-1#reload
Proceed with reload? [confirm]
00:05:00: %SYS-5-RELOAD: Reload requested
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 49152 Kbytes of main memory
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
program load complete, entry point: 0x80008000, size: 0x928024
Self decompressing the image : #######################################################################################
###############################################################################################################
###############################################################################################################
###############################################################################################################
###############################################################################################################
###############################################################################################################
###############################################################################################################
###############################################################################################################
###############################################################################################################
####################################################################### [OK]
!Do Not issue the break sequence here!!!!
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JO3S56I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 07:11 by phanguye
Image text-base: 0x80008088, data-base: 0x8107A5D0 !Issued Break Sequence Here
PASSWORD RECOVERY IS DISABLED.
Do you want to reset the router to factory default
configuration and proceed [y/n] ? !Answer this question with a “y”
Reset router configuration to factory default.
Compliance with U.S. Export Laws and Regulations - Encryption
This product performs encryption and is regulated for export
by the U.S. Government.
This product is not authorized for use by persons located
outside the United States and Canada that do not have prior
approval from Cisco Systems, Inc. or the U.S. Government.
This product may not be exported outside the U.S. and Canada
either by physical or electronic means without PRIOR approval
of Cisco Systems, Inc. or the U.S. Government.
Persons outside the U.S. and Canada may not re-export, resell,
or transfer this product by either physical or electronic means
withoutprior approval of Cisco Systems, Inc. or the U.S.
Government.
cisco 2620 (MPC860) processor (revision 0x102) with 39936K/9216K bytes of memory.
Processor board ID JAD042206GN (1804004596)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
!Now for some reason (I have not figured it out yet) the router acts as though you just issued the command again
!and gives you a chance to reverse the command
WARNING:
Executing this command will disable password recovery mechanism.
Do not execute this command without another plan for
password recovery.
Are you sure you want to continue? [yes/no]: no!As you can see I answered no to the question
Press RETURN to get started!
Passed
00:00:36: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
00:00:36: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down
00:00:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down
00:00:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down
00:00:48: %SYS-5-CONFIG_I: Configured from memory by console
00:00:48: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C260Translating "Router-1"
Router-1>0-JO3S56I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 07:11 by phanguye
00:00:49: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
00:00:49: %LINK-5-CHANGED: Interface Serial0/0, changed state to administratively down
00:00:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router-1>en
Password:
00:00:57: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down
!
!My config is still there
!
Router-1#sh ru
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router-1
!
enable secret 5 $1$sCnF$E51c1b/cHBjLYLw.zcboU1
!
!
!
!
!
ip subnet-zero
ip tcp synwait-time 15
no ip domain-lookup
!
ip audit notify log
ip audit po max-events 100
cns event-service server
!
!
!
!
end
Router-1#
Router-1#
Router-1#
Router-1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JO3S56I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 07:11 by phanguye
Image text-base: 0x80008088, data-base: 0x8107A5D0
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Router-1 uptime is 1 minute
System returned to ROM by reload
System image file is "flash:c2600-jo3s56i-mz.120-7.T.bin"
cisco 2620 (MPC860) processor (revision 0x102) with 39936K/9216K bytes of memory.
Processor board ID JAD042206GN (1804004596)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Router-1#