Pagina 1 di 1

Cisco e impostazioni di default

Inviato: lun 04 lug , 2005 9:00 pm
da samoka
sono un fortunato possessore di Cisco 837,
Ho fatto un po di casino e vorrei resettarlo per riportarlo alle impostazioni di fabbrica, cioè con il solo IOS e basta....

Cone devo fare Esiste qualche comando???


Grazie a tutti

Ciao :oops:

Inviato: lun 04 lug , 2005 9:24 pm
da andrewp
router# erase nvram


Ciao :)

Inviato: mar 05 lug , 2005 7:55 am
da samoka
Ho eseguito il reset della nvram ma durante il boot mi compaiono strani messaggi del tipo:

TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by Cisco Systems, Inc. Send echo messages
Compiled Sat 25-Oct-03 19:32 by ccai
ppp Start IE
Image text-base: 0x800131E8, data-base: 0x80C7F544
128K byte


This product contains cryptographic features and is subject to Unitedlease Release a



Isapio#show r
States and local country laws governing import, export, transfer andet connection
ratively d
use. Delivery of Cisco cryptographic products does not imply0:00:19.063: %SYS-5-CONFIG_I: Configured fr
third-party authority to import, export, distribute or use encryption.
traceroute Trace route to destination
Importers, exporters, distributors and users are responsiber#conf t

async-bootp Modify system bootp parametersio>n!!!!!!!!
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
*Mar 1 00:00:45.575: %SYS-4-CO

If you require further assistance please contact us by sending email toot parameters
[email protected]. Def

Cisco C837 (MPC857DSL) processor (revision 0x400) with 31130K/1638K bytes of m

Cisco IOS Software, C837 S

key Key management Tur
2048K bytes of processor board Web flash (Read/Write)

%Error opening tftp://255.255.255.255/network-confg (Timed out)ation
l
SETUP: new interface ATM0 placed in "shutdown" stateÍlities//www.cisco.com/tac140A2A
í

*Mar 1 00:00:16.987: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
*Mar 1 00:00:17.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to up
*Mar 1 00:00:18.411: %LINK-3-UPDOWN: Interface ATM0, changed state to down
*Mar 1 00:00:19.411: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, chan
ged state to down
*Mar 1 00:00:25.987: AUTOINSTALL: Ethernet0 is assigned 192.168.1.51
*Mar 1 00:00:51.987: %IP-5-WEBINST_KILL: Terminating DNS process
*Mar 1 00:00:52.423: %LINK-5-CHANGED: Interface ATM0, changed state to administ
ratively down
*Mar 1 00:00:53.967: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C837 Software (C837-K9O3SY6-M), Version 12.3(4)T, RELEASE S
OFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by Cisco Systems, Inc.
Compiled Sat 25-Oct-03 19:32 by ccai
*Mar 1 00:00:53.967: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing
a cold start
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/router-confg (Timed out)
%Error opening tftp://255.255.255.255/ciscortr.cfg (Timed out)
Router>


non so cosa siano le ultime righe

Inviato: mar 05 lug , 2005 5:49 pm
da samoka
ho capito:....
sono entrato in conf t.... e ho copiato la configurazione suggerita da NGI,
vorrei sapere come cancellare quello che c'è in conf t
grazie

Inviato: mer 06 lug , 2005 7:50 am
da samoka
aiuto non so + che fare

Inviato: lun 17 ott , 2005 5:55 pm
da minnie
dopo essere entrato in conf t
inserisci no prima di ogni istruzione che vuoi cancellare...

Inviato: mar 18 ott , 2005 8:54 am
da MaiO
Come ti hanno già suggerito,

entra nella conf t, impartisci ERASE NVRAM e poi RELOAD.
Tutta la configurazione sarà cancellata.

Prima di fare qualla operazione fai un SHOW VERSION e acertati che il valore Configuration register sia OK (di solito 0x2102
). Per i valori di conf register vedi qua http://www.cisco.com/en/US/products/hw/ ... 493f.shtml

Facci sapere.

Ciao

Inviato: mer 19 ott , 2005 11:32 pm
da Renato.Efrati
la cfg la cancelli anche con

wr er