CiscoForums.it

Ho impostato la configurazione,
l'ho salvata con il comando: Copy running-config startup-config
ma Spegnebdo e riaccendendo il router la configurazione viene persa!!!

Sh ver:

Cisco IOS Software, C837 Software (C837-K9O3SY6-M), Version 12.3(4)T, RELEASE S
OFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by Cisco Systems, Inc.
Compiled Sat 25-Oct-03 19:32 by ccai

ROM: System Bootstrap, Version 12.2(8r)YN, RELEASE SOFTWARE (fc1)

Router uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:c837-k9o3sy6-mz.123-4.T.bin"


Aiuto Grazie

Puoi incollarci anche uno sh run ?

Router#sh run
Copy
Building configuration...stems, Inc. Show Table

Current configuration : 819 bytes
!
version 12.3
no service padTesting lower
service timestamps debug datetime
Initi
boot-end-markeroryine protoco
!
memory-size iomem 5
smf
!
no aaa new-model
Router>
ip subnet-zero
Sizing flash
!p
!"
ip audit notify log
Exiting ini
ip audit po max-events 100
C800/SOHO serie
ip ssh break-string platform with 3276
no ftp-server write-enablelete command.itedce ATM0,
!a
!
!
no crypto isakmp enable
!
!
!
!
interface Ethernet0
no ip address

Router>show
ip broadcast-address 0.0.0.0

pro
shutdowncomplete,
hold-queue 100 out3000, size: 0x65e10
!3
interface ATM0docol*Mar 1 0
no ip addressYS-5-REST
ip broadcast-address 0.0.0.0
shutdown
no atm ilmi-keepalive

dsl operating-mode auto
!
complia
transport output all : 0x00659C25aws. By
line vty 0 4
!
scheduler max-task-time 5000
!
end

Re:


Ciao, se nn tagliavi l'ultima parte dello sh ver si poteva capire, la cosa più probabile chge il confreg errato..pasta uno sh ver complete che si vede se è così.


By Marckalex - Cisco Systems Engineer