Cisco803 | Perchè cavolo ci mette così tanto ad...

[Punisher]

... andare su il secondo canale ISDN?

Se perfino un modem riesce a upparlo istantaneamente com'è possibile che il Cisco prima connetta un canale e dopo BEN 20-30 secondi il secondo? Stessa cosa quando arrivano le chiamate per ripristinarlo.

Ho provato qualsiasi comando (come potrete vedere dalla config. nel post successivo), ma non c'è stato verso di diminuire questo tempo?

Come si fa, se si può a questo punto, a connettersi subito a 128K? O a fare in modo che il secondo canale vada su in pochi secondi?

Grazie, scusate il tono, ma l'essere costretto a usare ISDN pagando un patrimonio per un servizio sempre più scadente quando il resto del mondo che si definisce "sviluppato" ha la banda larga da anni mi fa girare sapete cosa ogni giorno sempre di più.

[Punisher]

!
version 12.2
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Cisco803
!
boot system flash c800-y6-mw.122-32.bin
logging buffered 4096 debugging
enable secret 5
!
clock timezone CET 1
clock summer-time CEST recurring last Sun Mar 2:00 last Sun Oct 3:00
!
dial-peer voice 1 pots
caller-id
no forward-to-unused-port
no call-waiting
ring 0
registered-caller ring 1
port 1
volume 3
destination-pattern
!
pots country DK
ip subnet-zero
!
ip name-server 193.70.152.25
ip name-server 193.70.192.25
ip telnet source-interface Ethernet0
isdn switch-type basic-net3
isdn tei-negotiation first-call
!
!
!
interface Ethernet0
description connected to EthernetLAN
ip address 192.168.0.1 255.255.255.0
ip nat inside
no cdp enable
!
interface BRI0
description connected to Internet
no ip address
encapsulation hdlc
dialer pool-member 1
isdn switch-type basic-net3
isdn voice-priority always
isdn incoming-voice modem
pulse-time 0
no dialer enable-timeout
no dialer wait-for-carrier-time
no cdp enable
keepalive 300
!
interface Dialer1
description connected to Internet
ip address negotiated
ip nat outside
encapsulation ppp
ip tcp header-compression
no ip split-horizon
dialer pool 1
dialer remote-name
dialer string
dialer caller
dialer hold-queue 10
dialer-group 1
dialer load-threshold 1 either
pulse-time 0
no dialer enable-timeout
no dialer wait-for-carrier-time
custom-queue-list 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname
ppp chap password 7 ppp pap sent-username password 7
ppp multilink
ppp multilink fragment disable
multilink load-threshold 1 either
keepalive 300
!
router rip
version 2
passive-interface Dialer1
network 192.168.0.0
no auto-summary
!
ip nat translation timeout 900
ip nat translation tcp-timeout 900
ip nat translation udp-timeout 600
ip nat translation finrst-timeout 300
ip nat translation syn-timeout 120
ip nat translation dns-timeout 300
ip nat translation icmp-timeout 120
ip nat translation max-entries 8192
ip nat inside source list 1 interface Dialer1 overload
ip nat inside source static tcp 192.168.0.2 4662 interface Dialer1 4662
ip nat inside source static udp 192.168.0.2 4672 interface Dialer1 4672
ip nat inside source static tcp 192.168.0.2 6881 interface Dialer1 6881
ip nat inside source static udp 192.168.0.2 6881 interface Dialer1 6881
ip http server
ip http access-class 1
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
access-list 1 permit 192.168.0.0 0.0.0.7
dialer-list 1 protocol ip permit
no cdp run
!
line con 0
exec-timeout 0 0
stopbits 1
line vty 0 4
access-class 1 in
exec-timeout 0 0
password 7
login
!
sntp server 150.145.55.6
no rcapi server
!
!
end

[Punisher]

Nessuno?