aiuto ws-c2950g-24-EI
Inviato: lun 22 ott , 2007 12:12 pm
Salve,
ho il seguente problema con il suddetto Switch, posto il boot:
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)e, duplication, or disclosure by the Government is
Compiled Mon 22-Jul-02 18:57 by antoninoMctions as set forth in subpara
Last res
WS-C2950G-24-EI starting...
Runnin
Base ethernet MAC Address: 00:08:a3:37:0c:00tEthernet/IEEE 802.3 interface(s)
Xmodem file system is available.gabit Ethernet/IEEE 802.3 interf
Initializing Flash...
flashfs[0]: 2 files, 1 directoriesn Technical Data and Computer
flashfs[0]: 0 orphaned files, 0 orphaned directoriesSoftware clause at DFARS sec. 252.227-7013.
flashfs[0]: Total bytes: 7741440
cisco Systems, Inc
flashfs[0]: Bytes used: 3720704 170 West Tasman Driv
flashfs[0]: Bytes available: 4020736 San Jose, California 95134-1
flashfs[0]: flashfs fsck took 6 seconds.
Cisco Internetwork Operating Sys
...done initializing flash.
Error loading "flash:/c2950-i6q4l2-mz.121-6.EA2c.bin"
flashfs[1]: 2 files, 1 director
Interrupt within 5 seconds to abort boot process. orphaned files, 0 orphaned directories
Loading "flash:/c2950-i6k2l2q4-mz.121-22.EA10a.bin"...##########################
flashfs[1]: Bytes used: 3720704
################################################################################
flashfs[1]: flashfs fsck took 6 seconds.
ry point: 0x80010000
executing...
Restricted Rights Legendg import, export, transfer and
Use, duplication, or disclosure by the Government is
use. Delivery of Cisco cryptographic products
subject to restrictions as set forth in subparagraph
third-party authority to impo
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraphre responsible for
(c) (1) (ii) of the Rights in
170 West Tasman Drive regulations. If you are unable
San Jose, California 95134-1706
to comply with
Cisco Internetwork Operating System Softwareately.
IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA10a, RELEASE SOFTWhic products may be found at:
ARE (fc2)
Copyright (c) 1986-2007 by cisco Systems, Inc./tool/stqrg.html
Compiled Tue 24-Jul-07 17:37 by antoninofurther assistance please contact us by
Image text-base: 0x80010000, data-base: 0x8067E000
export@cisco.
Initializing flashfs...co WS-C2950G-24-EI (RC3
flashfs[1]: 2 files, 1 directories19918K bytes of m
flashfs[1]: 0 orphaned files,
flashfs[1]: Bytes available: 4020736
24 FastEthernet/IEEE 802.3 i
flashfs[1]: flashfs fsck took 6 seconds.
2 Gigabit Ethernet/IEEE 802.3
flashfs[1]: Initialization complete.
32K bytes of flas
Done initializing flashfs.nfiguration memory.
POST: System Board Test : Passed
Base eth
POST: Ethernet Controller Test : Passed
ASIC Initialization Passeder: 73-7280-03
POST: FRONT-END LOOPBACK TEST : Passed part number: 34-0965-01
This product contains cryptographic features and is subject to United
Power supply serial number: PHI054907VS
States and local country laws governing import, export, transfer and
Motherboard revision number: A0
use. Delivery of Cisco cryptograpC2950G-2
flashfs[0]: 2 f
00:00:18: %SYS-5-RESTART: System restarted --
to comply with U.S. and local laws, return this product immediately.ating System Software
flashfs[0]: Total byt
IO
A summary of U.S. laws governing Cisco cryptographic products may be found at:
flashfs[0]: Bytes available: 4020736
http://www.cisco.com/wwl/export/crypto/ ... .htmlstems, Inc.
...done i
Last reset from system-resetding "flash:/c2950-i6q4l2-mz
Running Enhanced Image computer name, or una
24 FastEthernet/IEEE 802.3 interface(s)in 5 seconds to abort boot process.
2 Gigabit Ethernet/IEEE 802.3 interface(s)ommands:ng "flash:/c29
access-enable
32K bytes of flash-simulated non-volatile configuration memory.
clear Reset functions##
Base ethernet MAC Address: 00:08:A3:37:0C:00 Open a terminal connection
Model number: WS-C2950G-24-EI
System serial number: FOC0552W0LM
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: n
Press RETURN to get started!
00:00:15: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:00:18: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA10a, RELEASE SOFTW
ARE (fc2)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 24-Jul-07 17:37 by antonino
00:00:18: %SNMP-5-COLDSTART: SNMP agent on host Switch is undergoing a cold star
t
00:00:22: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively do
wn
Switch>
questo mi รจ accaduto dopo che ho fatto password recovery e aver copyato una nuova ios sulla flash con xmodem.
Mi potreste dare una mano per poter riportare lo Switch alle impostazioni di fabrica.
Grazie per l'aiuto
ho il seguente problema con il suddetto Switch, posto il boot:
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)e, duplication, or disclosure by the Government is
Compiled Mon 22-Jul-02 18:57 by antoninoMctions as set forth in subpara
Last res
WS-C2950G-24-EI starting...
Runnin
Base ethernet MAC Address: 00:08:a3:37:0c:00tEthernet/IEEE 802.3 interface(s)
Xmodem file system is available.gabit Ethernet/IEEE 802.3 interf
Initializing Flash...
flashfs[0]: 2 files, 1 directoriesn Technical Data and Computer
flashfs[0]: 0 orphaned files, 0 orphaned directoriesSoftware clause at DFARS sec. 252.227-7013.
flashfs[0]: Total bytes: 7741440
cisco Systems, Inc
flashfs[0]: Bytes used: 3720704 170 West Tasman Driv
flashfs[0]: Bytes available: 4020736 San Jose, California 95134-1
flashfs[0]: flashfs fsck took 6 seconds.
Cisco Internetwork Operating Sys
...done initializing flash.
Error loading "flash:/c2950-i6q4l2-mz.121-6.EA2c.bin"
flashfs[1]: 2 files, 1 director
Interrupt within 5 seconds to abort boot process. orphaned files, 0 orphaned directories
Loading "flash:/c2950-i6k2l2q4-mz.121-22.EA10a.bin"...##########################
flashfs[1]: Bytes used: 3720704
################################################################################
flashfs[1]: flashfs fsck took 6 seconds.
ry point: 0x80010000
executing...
Restricted Rights Legendg import, export, transfer and
Use, duplication, or disclosure by the Government is
use. Delivery of Cisco cryptographic products
subject to restrictions as set forth in subparagraph
third-party authority to impo
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraphre responsible for
(c) (1) (ii) of the Rights in
170 West Tasman Drive regulations. If you are unable
San Jose, California 95134-1706
to comply with
Cisco Internetwork Operating System Softwareately.
IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA10a, RELEASE SOFTWhic products may be found at:
ARE (fc2)
Copyright (c) 1986-2007 by cisco Systems, Inc./tool/stqrg.html
Compiled Tue 24-Jul-07 17:37 by antoninofurther assistance please contact us by
Image text-base: 0x80010000, data-base: 0x8067E000
export@cisco.
Initializing flashfs...co WS-C2950G-24-EI (RC3
flashfs[1]: 2 files, 1 directories19918K bytes of m
flashfs[1]: 0 orphaned files,
flashfs[1]: Bytes available: 4020736
24 FastEthernet/IEEE 802.3 i
flashfs[1]: flashfs fsck took 6 seconds.
2 Gigabit Ethernet/IEEE 802.3
flashfs[1]: Initialization complete.
32K bytes of flas
Done initializing flashfs.nfiguration memory.
POST: System Board Test : Passed
Base eth
POST: Ethernet Controller Test : Passed
ASIC Initialization Passeder: 73-7280-03
POST: FRONT-END LOOPBACK TEST : Passed part number: 34-0965-01
This product contains cryptographic features and is subject to United
Power supply serial number: PHI054907VS
States and local country laws governing import, export, transfer and
Motherboard revision number: A0
use. Delivery of Cisco cryptograpC2950G-2
flashfs[0]: 2 f
00:00:18: %SYS-5-RESTART: System restarted --
to comply with U.S. and local laws, return this product immediately.ating System Software
flashfs[0]: Total byt
IO
A summary of U.S. laws governing Cisco cryptographic products may be found at:
flashfs[0]: Bytes available: 4020736
http://www.cisco.com/wwl/export/crypto/ ... .htmlstems, Inc.
...done i
Last reset from system-resetding "flash:/c2950-i6q4l2-mz
Running Enhanced Image computer name, or una
24 FastEthernet/IEEE 802.3 interface(s)in 5 seconds to abort boot process.
2 Gigabit Ethernet/IEEE 802.3 interface(s)ommands:ng "flash:/c29
access-enable
32K bytes of flash-simulated non-volatile configuration memory.
clear Reset functions##
Base ethernet MAC Address: 00:08:A3:37:0C:00 Open a terminal connection
Model number: WS-C2950G-24-EI
System serial number: FOC0552W0LM
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: n
Press RETURN to get started!
00:00:15: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:00:18: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA10a, RELEASE SOFTW
ARE (fc2)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 24-Jul-07 17:37 by antonino
00:00:18: %SNMP-5-COLDSTART: SNMP agent on host Switch is undergoing a cold star
t
00:00:22: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively do
wn
Switch>
questo mi รจ accaduto dopo che ho fatto password recovery e aver copyato una nuova ios sulla flash con xmodem.
Mi potreste dare una mano per poter riportare lo Switch alle impostazioni di fabrica.
Grazie per l'aiuto