CiscoForums.it

Ciaoooo
Finalmente mi hanno ridato il router sistemato....
mi hanno ricaricato l'ios....ma non riesco a vedere
le interfacce card....che devo fare?
un grazie anticipato...
Alessandro

manda uno show ver ed uno show run

sh ver

Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SY-M), Version 12.2(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 11-Sep-01 20:42 by pwade
Image text-base: 0x800080E0, data-base: 0x808CFD2C

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

Router uptime is 44 minutes
System returned to ROM by power-on
System image file is "flash:c1700-sy-mz.122-5.bin"

cisco IPM (MPC860) processor (revision 0x300) with 58983K/6553K bytes of memory.

Processor board ID FOC07520GL2 (3533190102), with hardware revision 0000
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0xE542


sh run


Current configuration : 573 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
no service dhcp
!
hostname Router
!
!
ip subnet-zero
ip domain-name 10.31.24.1
!
!
!
!
interface FastEthernet0
ip address 10.10.10.7 255.255.255.0
ip broadcast-address 10.10.10.0
ip nat outside
speed auto

ip default-gateway 10.10.10.1
ip nat outside source list 101 interface FastEthernet0
ip classless
no ip http server
ip pim bidir-enable
!
access-list 101 permit ip 10.10.1.0 0.0.0.255 any
!
line con 0
line aux 0
line vty 0 4
!
no scheduler allocate
end

Router#

ecco qua....
ps non leggere la conf..che ho fatto fa un po paura

la prima cosa che farei è:
cambia il registro di configurazione in 0x2102
(config-register 0x2102)
e reload

ok...
sh ver

Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SY-M), Version 12.2(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 11-Sep-01 20:42 by pwade
Image text-base: 0x800080E0, data-base: 0x808CFD2C

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

Router uptime is 1 minute
System returned to ROM by reload
System image file is "flash:c1700-sy-mz.122-5.bin"

cisco IPM (MPC860) processor (revision 0x300) with 58983K/6553K bytes of memory.

Processor board ID FOC07520GL2 (3533190102), with hardware revision 0000
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


Using 573 out of 29688 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
no service dhcp
!
hostname Router
!
!
ip subnet-zero
ip domain-name 10.31.24.1
!
!
!
!
interface FastEthernet0
ip address 10.10.10.7 255.255.255.0
ip broadcast-address 10.10.10.0
ip nat outside
speed auto
!
ip default-gateway 10.10.10.1
ip nat outside source list 101 interface FastEthernet0
ip classless
no ip http server
ip pim bidir-enable
!
access-list 101 permit ip 10.10.1.0 0.0.0.255 any
!
line con 0
line aux 0
line vty 0 4
!
no scheduler allocate
end

ok e adesso?

quando si avvia il router, ha notato qualche errore ?
di solito ti mostra le if che non riconosce, quali if hai ??
prova a toglierle ed a rimetterle dentro (non a caldo)

System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2003 by cisco Systems, Inc.
C1700 platform with 65536 Kbytes of main memory

program load complete, entry point: 0x80008000, size: 0x45716c
Self decompressing the image : #################################################
#########################################
############ [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SY-M), Version 12.2(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 11-Sep-01 20:42 by pwade
Image text-base: 0x800080E0, data-base: 0x808CFD2C





Processor board ID FOC07520GL2 (3533190102), with hardware revision 0000
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)



Press RETURN to get started!


00:00:03: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
00:00:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed
state to up
00:00:06: %SYS-5-CONFIG_I: Configured from memory by console
00:00:09: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SY-M), Version 12.2(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 11-Sep-01 20:42 by pwade
00:00:09: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold star
t



scusa ma sono un po troppo novellino che devo fare?

Re:

Ciao,

Se per interfacce intendi la WIC-1ADSL....sembra dal fn che l'img che hai ora non ha tale supporto...quindi che mod wic nn ti trova, giusto per sapere?

By Marckalex

una è la single-port thernet wan interface card wic 1enet
l'altra 2 port serial wan interface card spare wic-27
spero che sia giusto quello che ti ho scritto
ma posso fare qualcosa?

Re:

Ciao,


cosa strana che l'img che hai è assegnata alla platform 1720 e nn 1721...ad ongi modo è img antidiluviana...unico consiglio che potrebbe essere anche quello di cisco..è...upgrade IOS.


By Marckalex

ok adesso vedo che posso fare....
faccio dei tentativi per adesso grazie per l'aiuto
vi faccio sapere buona giornata
alessandro