CiscoForums.it

grazie dell'aiuto per la prima parte sono riuscito a recuperare le password ora il problema sta nella connessione...penso...o non so...
qualkuno sa darmi una mano?

con il fast monitor la luce rossa della conness sembra esserci anche se non vedo nesson bite scambiato in rete..


version 12.0
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname ALESSANDRODELPIERO
!
enable secret 5 <removed>
!
username ALESSANDRODELPIERO password 7 <removed>
!
!
!
!
!
dial-peer voice 1 pots
no forward-to-unused-port
call-waiting
ring 0
port 1
destination-pattern 0734223754
!
pots country IT
ip subnet-zero
no ip source-route
!
ip dhcp pool DHCPPoolLAN_0
network 192.168.0.0 255.255.255.0
dns-server 192.168.0.2
default-router 192.168.0.1
!
ip name-server 192.168.0.2
isdn switch-type basic-net3
isdn voice-call-failure 0
!
!
!
interface Ethernet0
ip address 192.168.0.1 255.255.255.0
ip access-group 121 in
no ip directed-broadcast
no ip proxy-arp
ip nat inside
!
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
isdn incoming-voice modem
ppp authentication chap pap callin
ppp multilink
!
interface Dialer1
description ISP
ip address negotiated
ip access-group 121 in
no ip directed-broadcast
no ip proxy-arp
ip nat outside
encapsulation ppp
no ip split-horizon
dialer remote-name Cisco1
dialer pool 1
dialer idle-timeout 300
dialer string 7020191191 class DialClass
dialer hold-queue 10
dialer load-threshold 10 either
dialer-group 1
pulse-time 0
ppp authentication chap pap callin
ppp chap hostname teleconomy
ppp chap password 7 03105E07030C2E42410400
ppp pap sent-username teleconomy password 7 03105E07030C2E42410400
ppp multilink
!
ip nat inside source list 18 interface Dialer1 overload
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
map-class dialer DialClass
access-list 18 permit 192.168.0.0 0.0.0.255
access-list 121 deny udp any eq netbios-dgm any
access-list 121 deny udp any eq netbios-ns any
access-list 121 deny udp any eq netbios-ss any
access-list 121 deny tcp any eq 137 any
access-list 121 deny tcp any eq 138 any
access-list 121 deny tcp any eq 139 any
access-list 121 permit ip any any time-range TIME
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 0 0
transport input none
stopbits 1
line vty 0 4
exec-timeout 0 0
login local
!
time-range TIME
periodic daily 0:00 to 23:59
!
end

aggiornate le nuove impostazioni..plz help!!

dns-server 192.168.0.2
default-router 192.168.0.1
ip name-server 192.168.0.2

Sicuro di questo?! Tu hai una macchina .2 che fa da DNS?! Allinea gli ip...

sotto interface Dialer1:

ip access-group 121 in
encapsulation ppp

Questi due toglili.

ip nat inside source list 18 interface Dialer1 overload

E anche questa che non ha senso


Fammi sapere.