Ciao,
fatto
Ho seguito i passi di questo post:
http://samswireless.blogspot.it/2011/01 ... -post.html
ed il gioco è fatto, o almeno sembra, per ora ho solo caricato l'immagine che volevo io, nei prossimi giorni configuro l'access point.
Questo l'output della console:
r WRDTR,CLKTR: 0x8200083f 0x40000000
r RQDC ,RFDC : 0x80000034 0x00000214
using eeprom values
WRDTR,CLKTR: 0x8200083f 0x40000000
RQDC ,RFDC : 0x80000034 0x00000214
using MCNG ddr static values from serial eeprom
ddr init done
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
......................................................................................................................................................................................................................................................
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x8200083f, 0x40000000
RQDC, RFDC : 0x80000034, 0x00000214
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
64bit PCIE devices
PCIEx: initialization done
flashfs[0]: 7 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31739904
flashfs[0]: Bytes used: 7590912
flashfs[0]: Bytes available: 24148992
flashfs[0]: flashfs fsck took 9 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 44:03:a7:da:b2:0d
Ethernet speed is 100 Mb - HALF duplex
button is pressed, wait for button to be released...
button pressed for 22 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
process_config_recovery: image recovery
image_recovery: Download default IOS tar image tftp://255.255.255.255/ap3g1-k9w7-tar.default
examining image...
extracting info (286 bytes)
Image info:
Version Suffix: k9w8-.152-2.JB3
Image Name: ap3g1-k9w8-mx.152-2.JB3
Version Directory: ap3g1-k9w8-mx.152-2.JB3
Ios Image Size: 1147392
Total Image Size: 11540992
Image Feature: WIRELESS LAN|LWAPP
Image Family: AP3G1
Wireless Switch Management Version: 7.4.1.37
Extracting files...
ap3g1-k9w8-mx.152-2.JB3/ (directory) 0 (bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/ap3g1-k9w8-mx.152-2.JB3 (120953 bytes)..........................
extracting ap3g1-k9w8-mx.152-2.JB3/ap3g1-boot-m_upg (393216 bytes).....................................................................................
extracting ap3g1-k9w8-mx.152-2.JB3/u-boot.bin (393216 bytes).....................................................................................
ap3g1-k9w8-mx.152-2.JB3/html/ (directory) 0 (bytes)
ap3g1-k9w8-mx.152-2.JB3/html/level/ (directory) 0 (bytes)
ap3g1-k9w8-mx.152-2.JB3/html/level/1/ (directory) 0 (bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/1/appsui.js (563 bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/1/back.shtml (512 bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/1/forms.js (17492 bytes)...
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/1/sitewide.js (16554 bytes)...
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/1/config.js (25507 bytes).....
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/1/officeExtendap.css (41801 bytes).........
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/1/ap_home.shtml.gz (1297 bytes)
ap3g1-k9w8-mx.152-2.JB3/html/level/1/images/ (directory) 0 (bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/1/images/background_web41.jpg (732 bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/1/images/cisco-logo-2007.gif (1648 bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/1/images/info.gif (399 bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/1/images/login_homeap.gif (19671 bytes)....
ap3g1-k9w8-mx.152-2.JB3/html/level/15/ (directory) 0 (bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/15/officeExtendapBanner.htm (7114 bytes).
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/15/officeExtendapConfig.shtml.gz (2864 bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/15/officeExtendapEvent.shtml.gz (988 bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/15/officeExtendapHelp.htm (5013 bytes).
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/15/officeExtendapMain.shtml.gz (3350 bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/html/level/15/officeExtendapSummary.htm (718 bytes)
extracting ap3g1-k9w8-mx.152-2.JB3/ap3g1-k9w8-xx.152-2.JB3 (9303429 bytes)...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
extracting ap3g1-k9w8-mx.152-2.JB3/8003.img (1017240 bytes)............................................................................................................................................................................................................................
extracting ap3g1-k9w8-mx.152-2.JB3/D2.bin (11716 bytes)..
extracting ap3g1-k9w8-mx.152-2.JB3/D5.bin (45248 bytes).........
extracting ap3g1-k9w8-mx.152-2.JB3/Z2.bin (10504 bytes)..
extracting ap3g1-k9w8-mx.152-2.JB3/Z5.bin (29492 bytes)......
extracting ap3g1-k9w8-mx.152-2.JB3/G2.bin (7272 bytes).
extracting ap3g1-k9w8-mx.152-2.JB3/G5.bin (35956 bytes).......
extracting ap3g1-k9w8-mx.152-2.JB3/info (286 bytes)
extracting info.ver (286 bytes)
Deleting current version: flash:/ap3g1-rcvk9w8-mx...done.
New software image installed in flash:/ap3g1-k9w8-mx.152-2.JB3
Configuring system to use new image...done.
Requested system reload in progress...download took about 572 seconds
Loading "flash:/ap3g1-k9w8-mx.152-2.JB3/ap3g1-k9w8-mx.152-2.JB3"...#################
File "flash:/ap3g1-k9w8-mx.152-2.JB3/ap3g1-k9w8-mx.152-2.JB3" uncompressed and installed, entry point: 0x4000
executing...
enet halted
IOS Secondary Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
......................................................................................................................................................................................................................................................
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x8200083f, 0x40000000
RQDC, RFDC : 0x80000034, 0x00000214
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
Radio 0 : Vendor 0x11AB, Device 0x8350
64bit PCIE devices
Radio 1 : Vendor 0x11AB, Device 0x8324
PCIEx: initialization done
flashfs[0]: 31 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31739904
flashfs[0]: Bytes used: 11526144
flashfs[0]: Bytes available: 20213760
flashfs[0]: flashfs fsck took 10 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 44:03:a7:da:b2:0d
Creating Test Kernel diagnostic commands
Radio 0 : Vendor 0x11AB, Device 0x8324
Radio 1 : Vendor 0x11AB, Device 0x8350
Radio 2 : Vendor 0x330, Device 0x1C00
Radio 3 : Vendor 0x4141, Device 0x548
******** AUTOMATIC DDR CALIBRATION UPGRADE LOGIC *********
=== 1. Is original FCS bootloader in BS:? If not, skip upgrade ===
---> original FCS bootloader not detected -- skip upgrade
Boot CMD: 'boot flash:/ap3g1-k9w8-mx.152-2.JB3/ap3g1-k9w8-xx.152-2.JB3;flash:/ap3g1-k9w8-mx.152-2.JB3/ap3g1-k9w8-mx.152-2.JB3'
Loading "flash:/ap3g1-k9w8-mx.152-2.JB3/ap3g1-k9w8-xx.152-2.JB3"...############################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
File "flash:/ap3g1-k9w8-mx.152-2.JB3/ap3g1-k9w8-xx.152-2.JB3" uncompressed and installed, entry point: 0x100000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3500 Software (AP3G1-K9W8-M), Version 15.2(2)JB3, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 19-Dec-13 03:43 by prod_rel_team
Initializing flashfs...
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
......................................................................................................................................................................................................................................................
flashfs[3]: 31 files, 7 directories
flashfs[3]: 0 orphaned files, 0 orphaned directories
flashfs[3]: Total bytes: 31481856
flashfs[3]: Bytes used: 11526144
flashfs[3]: Bytes available: 19955712
flashfs[3]: flashfs fsck took 7 seconds.
flashfs[3]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 1 seconds.
flashfs[4]: Initialization complete....done Initializing flashfs.
Ethernet speed is 100 Mb - HALF duplex
Radio0 present 8364B 8000 B8020000 0 B8030000 10
Rate table has 80 entries (32 SGI/4 BF variants)
Radio1 present 8364B 8000 B0020000 0 B0030000 C
This product contains cryptographic features and is subject to United
memory validate-checksum 30
^
% Invalid input detected at '^' marker.
login authentication default
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
^
% Invalid input detected at '^' marker.
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
%Error opening flash:/ap3g1-rcvk9w8-mx/info (No such file or directory)cisco AIR-CAP3502I-E-K9 (PowerPC460exr) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FCZ1710Z15P
PowerPC460exr CPU at 666Mhz, revision number 0x18A8
Last reset from power-on
LWAPP image version 7.4.1.37
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 44:03:A7:DA:B2:0D
Part Number : 73-14857-01
PCA Assembly Number : 800-38797-01
PCA Revision Number : A0
PCB Serial Number : FOC16519FPL
Top Assembly Part Number : 800-32891-02
Top Assembly Serial Number : FCZ1710Z15P
Top Revision Number : A0
Product/Model Number : AIR-CAP3502I-E-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:09.754: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:09.754: *** CRASH_LOG = YES
*Mar 1 00:00:09.754: 64bit PCIE devicesSecurity Core found.
Base Ethernet MAC address: 44:03:A7:DA:B2:0D
*Mar 1 00:00:12.733: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:14.045: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:14.045: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:17.389: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:17.424: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
*Mar 1 00:00:20.374: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
*Mar 1 00:00:20.541: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3500 Software (AP3G1-K9W8-M), Version 15.2(2)JB3, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 19-Dec-13 03:43 by prod_rel_team
*Mar 1 00:00:20.541: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start
*Mar 1 00:00:20.585: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:20.598: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
*Mar 1 00:00:20.598: %CAPWAP-3-ERRORLOG: Failed to load configuration from flash. Resetting to default config
*Mar 1 00:00:20.620: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:20.780: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:20.780: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:21.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:21.677: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:22.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:22.762: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:22.768: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar 1 00:00:22.775: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:23.762: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:00:23.769: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:23.791: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:24.791: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up%Default route without gateway, if not a point-to-point interface, may impact performance
*Mar 1 00:00:48.982: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:00:55.814: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.10.10.45, mask 255.255.255.0, hostname AP4403.a7da.b20d
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (8.8.8.
User Access Verification
Username:
*Mar 1 00:01:06.799: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar 1 00:01:06.840: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLERCsico
Password:
% Authentication failed
Username: Cisco
Password:
AP4403.a7da.b20d>
AP4403.a7da.b20d>
AP4403.a7da.b20d>
AP4403.a7da.b20d>enab
AP4403.a7da.b20d>enable
Password:
% Access denied
AP4403.a7da.b20d>
AP4403.a7da.b20d>
AP4403.a7da.b20d>
AP4403.a7da.b20d>
AP4403.a7da.b20d>
*Mar 1 00:01:22.226: %SYS-5-PRIV_AUTH_FAIL: Authentication to privilege level 15 failed by Cisco on consoleen
AP4403.a7da.b20d>enable
Password:
AP4403.a7da.b20d#
AP4403.a7da.b20d#
AP4403.a7da.b20d#
AP4403.a7da.b20d#
AP4403.a7da.b20d#ping 10.0.0.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.0.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
AP4403.a7da.b20d#ping 10.
Not in Bound state.10.10.
*Mar 1 00:02:02.343: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.32
% Unrecognized host or address, or protocol not running.
AP4403.a7da.b20d#ping 10.10.10.32
*Mar 1 00:02:07.367: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination2
*Mar 1 00:02:07.379: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.10.10.45, mask 255.255.255.0, hostname AP4403.a7da.b20d
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.2, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 1/1/1 ms
AP4403.a7da.b20d#ping 10.10.10.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
AP4403.a7da.b20d#
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (8.8.8.
AP4403.a7da.b20d#
Vi aggiorno!
Ciao