Router SOHO91 - configurare protocollo di routing... forse.
Inviato: gio 21 giu , 2007 3:08 pm
Salve, è la prima volta che scrivo su questo forum, ho letto velocemente le regole, spero però di non sbagliare.
il mio router è un Soho91, il mio problema è di configurare il router in modo da fare da interfaccia tra la rete aziendale e il gateway internet.
provo a spiegare la situazione:
rete aziendale indirizzi ip 192.168.1.XXX
router cisco, porta Eth0 192.168.1.1
porta Eth1 172.10.3.100
Indirizzo antenna per Adsl 172.10.3.5
con la configurazione che posto sotto, dal pc con ip 192.168.1.20 faccio il ping alla eth1 correttamente, mentre se faccio il ping a 172.10.3.5 ottengo "Richiesta Scaduta".
allego un pò di informazioni:
sh run
sh ip route
sh ip int brief
sh ip protocols
sh protocols
sh ver
qualcuno può aiutarmi?
sono stato abbastanza chiaro?
qualcuno può darmi indicazioni su come fare degub?
grazie in anticipo
db
il mio router è un Soho91, il mio problema è di configurare il router in modo da fare da interfaccia tra la rete aziendale e il gateway internet.
provo a spiegare la situazione:
rete aziendale indirizzi ip 192.168.1.XXX
router cisco, porta Eth0 192.168.1.1
porta Eth1 172.10.3.100
Indirizzo antenna per Adsl 172.10.3.5
con la configurazione che posto sotto, dal pc con ip 192.168.1.20 faccio il ping alla eth1 correttamente, mentre se faccio il ping a 172.10.3.5 ottengo "Richiesta Scaduta".
allego un pò di informazioni:
sh run
Codice: Seleziona tutto
Building configuration...
Current configuration : 1216 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Router
!
no logging buffered
enable secret 5 $1$oGT.$qYhs/lOUcRKDlyWWuT1fO1
!
username Router password 7 15000E010B3E2E
no aaa new-model
ip subnet-zero
!
interface Ethernet0
description LAN
ip address 192.168.1.1 255.255.255.0
ip access-group 130 in
ip nat inside
!
interface Ethernet1
description WAN
ip address 172.10.3.100 255.255.255.0
ip nat outside
duplex auto
!
interface Dialer0
no ip address
!
interface Dialer1
no ip address
ip nat outside
!
router rip
version 2
network 172.10.0.0
network 192.168.1.0
no auto-summary
!
ip default-gateway 172.10.3.5
ip nat inside source list 102 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Ethernet1
ip http server
no ip http secure-server
!
access-list 130 deny udp any any eq 52001
access-list 130 permit ip any any
!
line con 0
password 7 025756085F555D70
logging synchronous
login
no modem enable
line aux 0
line vty 0 4
exec-timeout 120 0
password 7 11584B564341595D
logging synchronous
login local
length 0
!
scheduler max-task-time 5000
!
end
Codice: Seleziona tutto
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
217.141.253.0/32 is subnetted, 1 subnets
R 217.141.253.1 [120/1] via 192.168.1.253, 00:00:07, Ethernet0
172.10.0.0/24 is subnetted, 1 subnets
C 172.10.3.0 is directly connected, Ethernet1
C 192.168.1.0/24 is directly connected, Ethernet0
S* 0.0.0.0/0 is directly connected, Ethernet1
Codice: Seleziona tutto
Interface IP-Address OK? Method Status Protocol
Dialer0 unassigned YES NVRAM up up
Dialer1 unassigned YES NVRAM up up
Ethernet0 192.168.1.1 YES NVRAM up up
Ethernet1 172.10.3.100 YES NVRAM up up
Codice: Seleziona tutto
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 2 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
Ethernet0 2 2
Ethernet1 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
172.10.0.0
192.168.1.0
Routing Information Sources:
Gateway Distance Last Update
192.168.1.253 120 00:00:08
Distance: (default is 120)
Codice: Seleziona tutto
Global values:
Internet Protocol routing is enabled
Dialer0 is up, line protocol is up
Dialer1 is up, line protocol is up
Ethernet0 is up, line protocol is up
Internet address is 192.168.1.1/24
Ethernet1 is up, line protocol is up
Internet address is 172.10.3.100/24
Codice: Seleziona tutto
Cisco Internetwork Operating System Software
IOS (tm) SOHO91 Software (SOHO91-K9OY6-M), Version 12.3(2)XC2, EARLY DEPLOYMENT RELEAS
E SOFTWARE (fc1)
Synched to technology version 12.3(1.6)T
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Thu 04-Mar-04 01:24 by ealyon
Image text-base: 0x800131E8, data-base: 0x80A40300
ROM: System Bootstrap, Version 12.2(11r)YV1, RELEASE SOFTWARE (fc1)
ROM: SOHO91 Software (SOHO91-K9OY6-M), Version 12.3(2)XC2, EARLY DEPLOYMENT RELEASE SO
FTWARE (fc1)
sono stato abbastanza chiaro?
qualcuno può darmi indicazioni su come fare degub?
grazie in anticipo
db