Problemino aggiornamento IOS router 2610
Inviato: mer 18 apr , 2007 5:16 pm
Salve a tutti, stavo cercando di aggiornare il mio router 2610 alla versione IOS 12.3(20) ma al momento del riavvio durante la decompressione mi dice che la memoria è insufficiente.
Ho controllato sul sito cisco è ho visto che per questa versione (c2600-i-mz.12.3-20.bin) sono necessari 32k Dram e 8k flash
Vi allego anche il mio show ver:
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 11.3(8)T1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 11-Feb-99 02:37 by ccai
Image text-base: 0x80008084, data-base: 0x8055DBD4
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Router uptime is 0 minutes
System restarted by power-on
System image file is "flash:c2600-i-mz.113-8.T1", booted via flash
cisco 2610 (MPC860) processor (revision 0x202) with 18432K/6144K bytes of memory
.
Processor board ID JAB03140BJX (420675274)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Grazie a tutti
Ho controllato sul sito cisco è ho visto che per questa versione (c2600-i-mz.12.3-20.bin) sono necessari 32k Dram e 8k flash
Vi allego anche il mio show ver:
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 11.3(8)T1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 11-Feb-99 02:37 by ccai
Image text-base: 0x80008084, data-base: 0x8055DBD4
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Router uptime is 0 minutes
System restarted by power-on
System image file is "flash:c2600-i-mz.113-8.T1", booted via flash
cisco 2610 (MPC860) processor (revision 0x202) with 18432K/6144K bytes of memory
.
Processor board ID JAB03140BJX (420675274)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Grazie a tutti