CiscoForums.it

scusatemi

sto diventando pazzo

i led sono accesi , faccio lo sh int e tutto e' in UP ma non si naviga e non lo vedo da esterno.

mi hanno dato i seguenti parametri di configurazione

TD assegnata al cliente: xxxxxx
* Subnet IP: 83.xxx.xxx.145/32
* p-t-p: 62.xx.xx.130/30
* Dlci 20
* MCR: 64 Kbit/s





vedete qualche cosa di sbagliato che non vedo io nella configurazione

--------

Building configuration...

Current configuration : 1452 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname xxxxxxxxx
!
!
username xxxxxx privilege 15 password xxxxxxxxxxxxxxx
!
!
!
!
memory-size iomem 25
ip subnet-zero
!
!
!
!
interface Serial0
description CVT HDSL TD:xxxxxx/yy
no ip address
encapsulation frame-relay
no ip route-cache
load-interval 30
no fair-queue
!
interface Serial0.1 point-to-point
description "Accesso Internet thru EUTELIA"
ip address 62.xx.xx.130 255.255.255.252
no ip route-cache
no cdp enable
frame-relay interface-dlci 20 IETF
!

!
interface FastEthernet0
ip address 83.xxx.xxx.145 255.255.255.240
no ip route-cache
no keepalive
speed auto
no cdp enable
!
interface Dialer1
no ip address
no cdp enable
!
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0.1
ip http server
!
no cdp run

!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
login
stopbits 1
line aux 0
line vty 0 3
exec-timeout 120 0
password xxxxxxxxxxxx
login local
length 0
line vty 4
access-class 1 out
exec-timeout 120 0
password xxxxxxxxxxxxxxxxxx
login local
length 0
transport input telnet
transport output telnet
!
no scheduler allocate
end

nat inside
nat outside
overload

Confermo mancano le regole x il nat:

interface Serial0.1 point-to-point
ip nat outside

interface FastEthernet0
ip nat inside

acl per il nat