Pagina 1 di 1
Problem - Alice Business - static IP address
Inviato: ven 23 feb , 2007 5:52 pm
da julien
Hello,
Sorry i speak english or french, but i don't speak italian.
I try to configure a cisco 877 with the adsl (Alice Business) to milan.
When i configure the cisco with the dynamic IP, all is ok, but it's doesn't work when i fix the static ip address on the ATM. I tried several setting but that's doesn't work.
When i test with the alice modem (pirrelli), it's ok and i get my static IP address.
I would like to find a configuration example for the ATM and DIALER. maybe i need to add a specify option.
Thank you for your help
Inviato: ven 23 feb , 2007 6:43 pm
da n3m3
Hi,
!
interface ATM0
description "ADSL STATIC CONF"
ip address IP SUBNET(/30?)
pvc 8/35
protocol ip IP POP
encapsulation aal5snap
!
Inviato: ven 23 feb , 2007 7:49 pm
da julien
Thank You very much,
i will try Monday
Have a good week-end
Inviato: lun 26 feb , 2007 11:17 am
da julien
Hi
I tested your solution but that doesn't work.
When i configure with the dynamic ip, i have to set the DIALER (with authentification) and the ATM.
I don't understand what is:
protocol ip IP POP
I give an example of my alice profil:
Static IP : 11.22.33.44
Private LAN : 255.255.255.0
LAN public : adresse LAN
Gateway : 11.22.33.254
DNS 1° : 151.99.125.1
DNS 2° : 151.99.0.100
www.alicebusiness.it
User ID :
[email protected]
Password : PWXXX
With your solution i try:
Codice: Seleziona tutto
interface ATM0.1 point-to-point
ip address 11.22.33.44 255.255.255.0
pvc 8/35
protocol ip 11.22.33.254
oam-pvc 0
encapsulation aal5snap
Here the setting with the Dynamic-IP:
Codice: Seleziona tutto
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface Dialer0
ip address "DYNAMIC_IP" 255.255.255.254
ip access-group 104 in
ip mtu 1452
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password PWXXX
ppp pap sent-username [email protected] password PWXXX
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0 permanent
This configuration (Dynamic-ip) is ok.
So...
Help me.
Inviato: lun 26 feb , 2007 12:02 pm
da n3m3
U have a dynamic dsl contract o static?
If is static how many ip ?
Inviato: lun 26 feb , 2007 12:21 pm
da julien
I have a static ip contract.
When i used the modem/routeur Alice (Pirrelli) it's work, and i get the adress static ip. The alice modem/routeur is already set when i received it.
I have no problem to configure my routeur like dynamic ip, but when i try with ip static i can't get it.
I saw some setting with static address ip, and they don't need to set the Dialer, it's normal ?
I make the 2 tests:
Codice: Seleziona tutto
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
ip address 11.22.33.44 255.255.255.254
ip access-group 104 in
ip virtual-reassembly
pvc 8/35
protocol ip 11.22.33.44 broadcast
oam-pvc 0
encapsulation aal5snap
..
..
ip classless
ip route 0.0.0.0 0.0.0.0 ATM0.1
and
Codice: Seleziona tutto
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
ip address 11.22.33.44 255.255.255.254
ip access-group 104 in
ip virtual-reassembly
pvc 8/35
protocol ip 11.22.33.254(MY Gateway) broadcast
oam-pvc 0
encapsulation aal5snap
..
..
ip classless
ip route 0.0.0.0 0.0.0.0 ATM0.1
I don't uderstand what does it mean the command in PVC 8/35: