ciao a tutti
sto configurando il cisco come terminatore di accessi pppoe con un radius freeradius
i due si parlano ...ma non autenticano
se faccio il radtest l'untente passa , tramite cisco no.
*********************DEBUG FREERADIUS*********************
rad_recv: Access-Request packet from host 192.168.1.1:1645, id=2, length=87
Framed-Protocol = PPP
User-Name = "daniele"
CHAP-Password = 0x010913e0600eddef53e2ca6575c9e7e4e4
NAS-Port-Type = Virtual
NAS-Port = 0
NAS-Port-Id = "0/0/1/0"
Service-Type = Framed-User
NAS-IP-Address = 192.168.1.1
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
modcall[authorize]: module "preprocess" returns ok for request 3
rlm_chap: Setting 'Auth-Type := CHAP'
modcall[authorize]: module "chap" returns ok for request 3
modcall[authorize]: module "mschap" returns noop for request 3
rlm_realm: No '@' in User-Name = "daniele", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 3
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 3
users: Matched entry DEFAULT at line 152
users: Matched entry DEFAULT at line 171
users: Matched entry DEFAULT at line 183
modcall[authorize]: module "files" returns ok for request 3
radius_xlat: 'daniele'
rlm_sql (sql): sql_set_user escaped user --> 'daniele'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'daniele' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 0
radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'daniele' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'daniele' ORDER BY id'
radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'daniele' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 0
modcall[authorize]: module "sql" returns ok for request 3
rlm_pap: Found existing Auth-Type, not changing it.
modcall[authorize]: module "pap" returns noop for request 3
modcall: leaving group authorize (returns ok) for request 3
rad_check_password: Found Auth-Type CHAP
auth: type "CHAP"
Processing the authenticate section of radiusd.conf
modcall: entering group CHAP for request 3
rlm_chap: login attempt by "daniele" with CHAP password
rlm_chap: Using clear text password "daniele" for user daniele authentication.
rlm_chap: chap user daniele authenticated succesfully
modcall[authenticate]: module "chap" returns ok for request 3
modcall: leaving group CHAP (returns ok) for request 3
Processing the post-auth section of radiusd.conf
modcall: entering group post-auth for request 3
rlm_sql (sql): Processing sql_postauth
radius_xlat: 'daniele'
rlm_sql (sql): sql_set_user escaped user --> 'daniele'
radius_xlat: 'INSERT into radpostauth (id, user, pass, reply, date) values ('', 'daniele', 'Chap-Password', 'Access-Accept', NOW())'
rlm_sql (sql) in sql_postauth: query is INSERT into radpostauth (id, user, pass, reply, date) values ('', 'daniele', 'Chap-Password', 'Access-Accept', NOW())
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql (sql): Released sql socket id: 4
modcall[post-auth]: module "sql" returns ok for request 3
modcall: leaving group post-auth (returns ok) for request 3
Sending Access-Accept of id 2 to 192.168.1.1 port 1645
Framed-IP-Address = 255.255.255.254
Framed-MTU = 1492
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-Compression = Van-Jacobson-TCP-IP
**********************************************************
*********************Configurazione cisco*******************
!
aaa new-model
!
!
aaa authentication ppp default group radius
aaa authorization network default group radius
!
aaa session-id common
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address *.*.*.* 255.255.255.0
ip access-group 101 in
ip nat outside
duplex auto
speed 10
!
interface GigabitEthernet0/1
description rete_locale
ip address 10.0.0.1 255.0.0.0 secondary
ip address 192.168.1.1 255.255.255.0
ip access-group 161 in
ip nat inside
ip tcp adjust-mss 1452
duplex auto
speed 10
pppoe enable
service-policy input QOS
service-policy output QOS
!
interface Virtual-Template10
description Template pppoe
mtu 1492
no ip address
peer default ip address pool pppoe_pool
ppp authentication chap ms-chap ms-chap-v2 pap
!
ip local pool pppoe_pool 10.0.0.50 10.0.0.100
radius-server host 10.0.0.3 auth-port 1812 acct-port 1813 key testing123
!
Grazie
Daniele
