CISCO 3640 IOS UPGRADE
Inviato: mer 29 nov , 2006 3:08 pm
Salve a tutti e grazie sin da ora per la disponibilità. La mia domanda è questa: Ho un router Cisco 3640 Con 5 seriali Una ethernet a 10Mbit, una Token Ring e una BRI, a me serve avere abilitato il protocollo IPX e vorrei abilitare l'SSH su questo Router per una maggiore protezione, esiste una versione di IOS che supporti sia l'IPX che L' SSH? Attualmente ho la versione di IOS seguente:
dallo sh ver
------------------------------------------------------------------------------
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-DO3S-M), Version 12.2(40), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Thu 12-Oct-06 17:43 by pwade
Image text-base: 0x60008930, data-base: 0x612A4000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f
c1)
PB_3640_BACK uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c3640-do3s-mz.122-40.bin"
cisco 3640 (R4700) processor (revision 0x00) with 61440K/4096K bytes of memory.
Processor board ID 25047453
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
1 Token Ring/IEEE 802.5 interface(s)
5 Serial network interface(s)
1 ISDN Basic Rate interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Spero di essere stato chiaro.
Salve a tutti
dallo sh ver
------------------------------------------------------------------------------
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-DO3S-M), Version 12.2(40), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Thu 12-Oct-06 17:43 by pwade
Image text-base: 0x60008930, data-base: 0x612A4000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f
c1)
PB_3640_BACK uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c3640-do3s-mz.122-40.bin"
cisco 3640 (R4700) processor (revision 0x00) with 61440K/4096K bytes of memory.
Processor board ID 25047453
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
1 Token Ring/IEEE 802.5 interface(s)
5 Serial network interface(s)
1 ISDN Basic Rate interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Spero di essere stato chiaro.
Salve a tutti
Grazie mille MaiO