Volevo chiedervi gentilmente un parere su la configurazione che ho fatto per un Cisco 2610XM con linea Telecom Multigroup 8ip. Premetto che non mi serve usare gli 8 ip in quanto me ne basta 1 da direzionare verso il Firewall.
Di seguito posto la configurazione, accetto consigli utili per migliorarmi. Grazie mille fin da ora a tutti.
Codice: Seleziona tutto
!
version 12.3
no parser cache
no service pad
service timestamps debug uptime
service timestamps log datetime localtime
service password-encryption
service udp-small-servers
!
hostname Router
!
boot-start-marker
boot-end-marker
!
enable secret 5 XXXXXXXXXXXXXXXXXXXXXXXXX
!
no aaa new-model
!
!
ip subnet-zero
!
!
ip tcp path-mtu-discovery
ip cef
ip domain name interbusiness.it
ip name-server 151.99.0.100
ip name-server 151.99.125.3
!
!
username service privilege 15 password 7 XXXXXXXXXXXXXXXXXX
!
!
!
interface FastEthernet0/0
ip address 10.10.10.1 255.255.255.0 secondary
ip address 88.XX.XX.65 255.255.255.248
ip nat inside
hold-queue 100 out
!
!
interface ATM0/0
no ip address
shutdown
no atm ilmi-keepalive
bundle-enable
dsl operating-mode auto
!
interface ATM0/0.1 point-to-point
ip unnumbered FastEthernet0/0
ip nat outside
pvc 8/35
encapsulation aal5snap
!
!
!
ip classless
ip route 0.0.0.0 0.0.0.0 ATM0/0.1
!
no ip http server
no ip http secure-server
!
ip nat inside source list 60 interface FastEthernet0/0 overload
ip nat inside source static 10.10.10.2 88.XX.XX.65
!
access-list 60 permit 10.10.10.0 0.0.0.255
snmp-server community public RO 18
snmp-server community private RW 19
snmp-server host 151.99.126.2 private
!
!
!
!
line con 0
exec-timeout 120 0
login local
transport preferred all
transport output all
stopbits 1
line aux 0
transport preferred all
transport output all
line vty 0 4
password 7 XXXXXXXXXXXXXXXXXXXXXXXXXXX
login
transport preferred none
transport input telnet
transport output all
!
scheduler max-task-time 5000
end
