sto avendo un problema alquanto bizarro sul mio cisco soho97... Dopo averlo configurato a puntino (salvato o con write memory o copy running-config startup-config), se lo spengo e lo riaccendo perdo la configurazione, nella fase di boot (sono collegato tramite porta console) mi chiede di mettere a mano i parametri, come se fosse acceso per la prima volta...
Non riesco a capire dove e come sbaglio... Ho provato a dargli un comando reload pensando che fosse la batteria tampone, ma è la stessa cosa...
Forse qualcosa che lo disturba nella configurazione? Ho notato che appena bypasso la richiesta di immissione manuale della configurazione i led rxd e txd della sezione adsl cominciano a lampeggiare velocemente, anche se non sono connesso alla presa della linea adsl.
Any help?
Vi posto la configurazione...
Codice: Seleziona tutto
Current configuration : 4343 bytes
!
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging buffered 52000 debugging
enable secret 5 xxxxxxxxxxxxx
!
aaa new-model
!
!
aaa authentication login default local
!
aaa session-id common
!
resource policy
!
clock timezone PCTime 1
ip subnet-zero
no ip source-route
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool LAN_10.10.10
network 10.10.10.0 255.255.255.0
domain-name alice.it
dns-server 151.99.125.1 151.99.0.100
default-router 10.10.10.1
lease 30
!
!
ip cef
ip domain name alice.it
ip name-server 151.99.125.1
ip name-server 151.99.0.100
!
!
!
username xxxxx privilege 15 secret 5 xxxxx
username xxxxx secret 5 xxxxxx
!
!
!
!
!
interface Ethernet0
ip address 10.10.10.1 255.255.255.0
ip access-group 100 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip tcp adjust-mss 1452
hold-queue 100 out
!
interface ATM0
no ip address
no ip mroute-cache
atm vc-per-vp 64
no atm ilmi-keepalive
dsl operating-mode auto
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface Dialer1
ip access-group 101 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
access-list 1 permit 10.10.10.0 0.0.0.255
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 100 permit ip 10.10.10.0 0.0.0.255 any
access-list 101 permit udp host 151.99.0.100 eq domain any
access-list 101 permit udp host 151.99.125.1 eq domain any
access-list 101 permit icmp any any echo-reply
access-list 101 permit icmp any any time-exceeded
access-list 101 permit icmp any any unreachable
access-list 101 deny ip 10.0.0.0 0.255.255.255 any
access-list 101 deny ip 10.10.10.0 0.0.0.255 any
access-list 101 deny ip 172.16.0.0 0.15.255.255 any
access-list 101 deny ip 192.168.0.0 0.0.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip host 0.0.0.0 any
access-list 101 deny ip any any log
no cdp run
!
control-plane
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
privilege level 15
transport input telnet ssh
!
scheduler max-task-time 5000
end
