CiscoForums.it

Salve a tutti, ho appena acquistato un vetusto router soho 77 ma nonostante mi stia scervellando da circa 24 ore non riesco a configurarlo.
Ho provato sia via ios che via interfaccia web.
L'ultima evoluzione è che da consolle riesco a pingare con successo alcuni url, ma di far navigare i pc neanche se ne parla.

allego la configurazione ed uno show ver.

Grazie in anticipo.

Cisco Internetwork Operating System Software
IOS (tm) SOHO70 Software (SOHO70-Y1-M), Version 12.3(15), RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 25-May-05 07:20 by ssearch
Image text-base: 0x80013148, data-base: 0x805E5C80

ROM: System Bootstrap, Version 12.1(3r)XP, RELEASE SOFTWARE (fc1)
ROM: SOHO70 Software (SOHO70-Y1-M), Version 12.3(15), RELEASE SOFTWARE (fc3)

pillo uptime is 27 minutes
System returned to ROM by reload
System image file is "flash:soho70-y1-mz.123-15.bin"

CISCO SOHO 77 (MPC855T) processor (revision 0x301) with 15360K/1024K bytes of me
mory.
Processor board ID JAD054608SW (2920526169), with hardware revision 0000
CPU rev number 5
Bridging software.
1 Ethernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2102

Current configuration : 1683 bytes
!
version 12.3
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname pillo
!
boot-start-marker
boot-end-marker
!
no logging buffered
enable secret 5 $1$QD7h$ZIymUZ2.0Q0UGC0/RtdMB/
!
ip subnet-zero
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool CLIENT
import all
network 10.10.10.0 255.255.255.248ip dhcp pool CLIENT
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
domain-name cisco
lease 0 2
!
username pillo privilege 15 secret 5 $1$u5.e$YahFB7asmpmY550Qdy2DQ.
!
!
!
interface Ethernet0
ip address 10.10.10.1 255.255.255.248
ip nat inside
ip tcp adjust-mss 1452
hold-queue 100 out
!
interface ATM0
no ip address
atm vc-per-vp 64
no atm ilmi-keepalive
dsl operating-mode auto
pvc 8/35

pppoe-client dial-pool-number 1
!
!
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer remote-name redback
dialer-group 1
ppp authentication pap chap callin
ppp chap hostname blablabla
ppp chap password blablabla
ppp pap sent-username blablabla password blablabla
ppp ipcp dns request
ppp ipcp wins request
!
ip nat inside source list 102 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http access-class 23
ip http authentication local
ip http max-connections 4
ip http timeout-policy idle 600 life 86400 requests 10000
!
access-list 23 permit 10.10.10.0 0.0.0.7
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120 0
login local
stopbits 1
line vty 0 4
access-class 23 in
exec-timeout 120 0
login local
length 0
!
scheduler max-task-time 5000
end

Ciao, forse è il caso di indicare agli esperti su quale provider devi fare funzionare il tutto ed il protocollo da utilizzare.

Ti posto la mia configurazione, alquanto rude, ma perfettamente funzionante con Alice 4MB PPPoA

Router#sh run
Building configuration...

Current configuration : 1572 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname CiscoRouter
!
enable secret 5 [password]
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
ip name-server 85.37.17.57
ip name-server 85.38.28.80
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool DHCP_SERVER
import all
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
lease 1 0
!
!
!
!
interface Ethernet0
ip address 10.10.10.1 255.255.255.0
ip nat inside
no ip mroute-cache
hold-queue 100 out
!
interface ATM0
no ip address
no ip mroute-cache
atm vc-per-vp 64
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface Dialer1
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname aliceadsl
ppp chap password 7 [password]
ppp pap sent-username aliceadsl password 7 [password]
ppp ipcp dns request
ppp ipcp wins request
hold-queue 224 in
!
ip nat inside source list 102 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
!
access-list 23 permit 10.10.10.0 0.0.0.255
access-list 102 permit ip 10.10.10.0 0.0.0.255 any
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120 0
stopbits 1
line vty 0 4
access-class 23 in
exec-timeout 120 0
password 7 [password]
login
length 0
!
scheduler max-task-time 5000
end

Ciao

grazie mille adesso provo, il mio provider è alice 640

Io possiedo il tuo stesso router e alice 640. Anche io la prima volta ci ho messo un bel po' a configurarlo per poter navigare. Ho trovato una interessantissima guida della tiscali (è per l'827 che comunque però quasi uguale al soho77) seguendo la quale sono riuscito almeno a farlo navigare.
Ecco il link: http://assistenza.tiscali.it/adsl/guide ... index.html

Poi segui i vari topic su questo forum per configurarlo al meglio.

Si fa tutto da console con il cavo azzurro.

Ti posto la mia sh run funzionante:
Current configuration : 1781 bytes
!
version 12.3
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
enable secret *****
!
ip subnet-zero
!
username Cisco privilege 15 password *****
!
!
!
interface Ethernet0
ip address 192.168.2.1 255.255.255.0
ip nat inside
hold-queue 100 out
!
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface Dialer0
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
ppp chap hostname *****
ppp chap password *****
ppp pap sent-username ***** password *****
!
ip nat translation timeout 420
ip nat translation tcp-timeout 120
ip nat translation udp-timeout 120
ip nat translation finrst-timeout 300
ip nat translation syn-timeout 120
ip nat translation dns-timeout 300
ip nat translation icmp-timeout 120
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source static tcp 192.168.2.4 5904 interface Dialer0 5904
ip nat inside source static udp 192.168.2.4 5904 interface Dialer0 5904
ip nat inside source static tcp 192.168.2.51 5951 interface Dialer0 5951
ip nat inside source static udp 192.168.2.51 5951 interface Dialer0 5951
ip nat inside source static udp 192.168.2.51 17001 interface Dialer0 17001
ip nat inside source static tcp 192.168.2.51 17000 interface Dialer0 17000
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
!
access-list 1 permit 192.168.2.0 0.0.0.255
!
line con 0
stopbits 1
line vty 0 4
exec-timeout 0 0
password *****
login local
length 0
!
scheduler max-task-time 5000
end

Le porte 5904 e 5951 mi servono per vnc mentre la 17000 e la 17001 mi servono per emule (tcp ed udp rispettivamente).

Spero di esserti stato di aiuto.

Ciao

grazie mille, ho risolto pochi minuti prima del tuo post ma grazie lo stesso.

piborsal ha scritto:!
ip nat inside source list 102 interface Dialer1 overload


access-list 23 permit 10.10.10.0 0.0.0.7

dialer-list 1 protocol ip permit

Se ti puo' essere utile capire:
Non ce' la access-list 102
Ciao

Se ti puo' essere utile capire:
Non ce' la access-list 102
Ciao

Grazie!