Il Miracolo della moltiplicazione della RAM !!!!!

Tutto ciò che ha a che fare con la configurazione di apparati Cisco (e non rientra nelle altre categorie)

Moderatore: Federico.Lagni

Rispondi
commodore
Cisco fan
Messaggi: 34
Iscritto il: dom 14 nov , 2010 5:51 pm

Un buongiorno a tutti :D

oggi i miei Router 2651xm sono in vena di miracoli !!!!!

quando li ho comprati avevano installata questa versione di IOS :

c2600-i-mz.123-22a.bin

dando il comando show version

il risultato era il seguente :

Router_03#show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.3(22a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Fri 20-Jul-07 20:52 by hqluong
Image text-base: 0x80008098, data-base: 0x80CEE24C

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Router_03 uptime is 53 minutes
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.123-22a.bin"

cisco 2651XM (MPC860P) processor (revision 0x400) with 118784K/12288K bytes of memory.
Processor board ID JHY0846K1TJ (3073802019)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router_03#


adesso li ho ripuliti ed aggiornati installando la seguente versione di IOS :

c2600-adventerprisek9-mz.124-25d.bin

e miracolo !!! questo e' il nuovo risultato del comando show version :

Router_03#show version
Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(25d), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 18-Aug-10 04:49 by prod_rel_team

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Router_03 uptime is 1 minute
System returned to ROM by reload
System image file is "flash:c2600-adventerprisek9-mz.124-25d.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco 2651XM (MPC860P) processor (revision 4.0) with 229376K/32768K bytes of memory.
Processor board ID JHY0846K1TJ
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
2 Serial(sync/async) interfaces
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router_03#


e' possibile che la versione precedente dell'IOS indirizzava solo 128 Mb di ram anche se nei Router ne sono installati 256 Mb ? :?: :?: :?:
commodore
Cisco fan
Messaggi: 34
Iscritto il: dom 14 nov , 2010 5:51 pm

Alla fine mi sono deciso, li ho smontati tutti e gli ho dato una super pulita .... ed ecco svelato il mistero, come pensavo la versione precedente indirizzava solo 128 Mb di ram.

Che bello scoprire di avere i Router espansi al massimo ed averli pagati tutti e 4 200 euro :mrgreen: 8)
Non hai i permessi necessari per visualizzare i file allegati in questo messaggio.
paolomat75
Messianic Network master
Messaggi: 2965
Iscritto il: ven 29 gen , 2010 10:25 am
Località: Prov di GE

Buono :-)
Non cade foglia che l'inconscio non voglia (S.B.)
Rispondi