CiscoForums.it

Salve a tutti,
volevo chiedere se possibile una mano per configurare correttamente il traffic shaping sul cisco in oggetto. Vorrei ottenere 150Kb per funzionalità di VoIP e il resto per gli altri servizi.
Al momento ho configurato semplicemente una priority-list sulla porta interessata al traffico voce, ma non conosco come poter configurare correttamente il QoS.
Riporto per chiunque volesse aiutarmi la mia configurazione.
Grazie.


!
version <12.x>
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname router
!
boot-start-marker
boot-end-marker
!
no logging buffered
!
no aaa new-model
ip subnet-zero
no ip source-route
ip domain name <miodominio.xxx>
ip name-server <221.xxx.xxx.xxx>
ip name-server <221.xxx.xxx.xxx>
!
!
ip audit po max-events 100
no ftp-server write-enable
!
!
!
!
no crypto isakmp enable
!
!
!
interface Ethernet0
ip address <192.x.x.x> 255.255.255.0
ip nat inside
no ip mroute-cache
no keepalive
hold-queue 100 out
!
interface ATM0
no ip address
no ip route-cache
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
ip address <65.x.x.x> 255.255.255.0
ip nat outside
no ip route-cache
pvc 8/35
oam-pvc 0
encapsulation aal5snap
!
!
ip classless
ip route 0.0.0.0 0.0.0.0 ATM0.1
ip route <65.x.x.x> 255.255.255.255 ATM0.1
no ip http server
no ip http secure-server
ip nat inside source list 50 interface ATM0.1 overload
!
!
access-list 50 permit <192.x.x.x> 0.0.0.255
!
!
priority-list 1 protocol ip high udp <porta-VoIP>
!
!
control-plane
!
!
scheduler max-task-time 5000
!
end